Dynamix DUPLEX Wall Mounted Rotary Panel Owner’s Manual
- July 4, 2024
- Dynamix
Table of Contents
Model No.: DUPLEX
Wall Mounted Rotar y Panel
1-3 color/Glass panel/Rotary dimming/DC input/3 channel constant voltage PWM
output/Wireless remote control
Features
- Rotary panel sing lecol or, dual color or RGB PWM constant voltage controller.
- Rotate knob to change RGB color, color temperature or brightness.
- 256 level s0-100% dimming smoothly without any flash.
- RF 2.4G single zone or multiple zone remote control Compatibi lity with .
- PWM frequency 2KHz or 8KHz selectable.
- Push/Rotate with LED indicator.
- Over-heat / Over- load / Shor t circuit protection, recover automatically.
- White & Black glass panel avai lable.
Technical Parameters
Input and Output| | |
---|---|---|---
Mode l No.| 12-48VDC| 2K| 3K
Input vo l tage| 12.5A| 12-48VDC| RGB
Input current| 3 x (12-48)VDC| 10.5A| 12-48VDC
Output vo l tage| 3CH,4A/CH| 2 x (12-48)VDC| 12.5A
Output current| 3 x (48-192)W| 2CH,5A/CH| 3 x (12-48)VDC
Output power| Constant voltage| 2 x (60-240)W| 3CH,4A/CH
Output type| 2K/8KHz| Constant voltage| 3 x (48-192)W
PWM frequency| 1K| Dua l co l or| Constant voltage
Light type| Sing l e co l or| 2K/8KHz| 2K/8KHz
Safety and EMC|
---|---
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certication| CE,EMC,RED
Environment|
Operation temperature| Ta: -30°C ~ +55°C
Case temperature (Max.)| Ta: +85°C
Package|
Gross weight| 0.220kg
Size| L112 x W112 x H60mm
Mechanical Structures and Installations
Match Remote Control (two match ways)
The rotary panel controller can also match with the RF remote (optional).
End user can choose the suitable match/delete ways. Two options are offered
for selection:
Use Knob
Match:
Turn on light, turn off, immediately push the knob for 5s, then press on/off
key (single zone remote) or zone key (multiple zone remote) of the RF remote
with in 5s.
The LED indicator fast flash 3 times means match is successful.
Delete:
Turn on light, turn off, immediately push the knob for 10s, delete all matched
RF remote.
The LED indicator fast flash 6 times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again, immediately short
press on/off key (single zone remote) or zone key (multiple zone remote) 3
times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again, immediately short
press on/off key (single zone remote) or zone key (multiple zone remote) 5
times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Knob function
1K Single color dimmer
-
Rotate: Rotate knob to adjust brightness (2.5 turns, 50 levels).
After turn on light: -
Long push(1-6s): Continuous 256 levels brightness adjustment.
-
Push: Turn on or off light.
2K Dual color temperature
-
Push: Turn on or off light.
After turn on light: -
Rotate: Rotate knob to change color temperature or brightness (2.5 turns, 50 levels).
-
Push twice: Switch between color temperature or brightness adjustment.
-
Long push(1-6s): Continuous 256 levels brightness adjustment.
3K RGB
-
Push: Turn on or off light.
After turn on light: -
Rotate: Rotate knob to change RGB color (3 turns, 60 colors) or brightness (2.5 turns, 50 levels).
-
Push twice: Switch between RGB color or brightness adjustment.
-
Long push(1-6s): Continuous 256 levels saturation or brightness adjustment.
Wiring diagram
PWM frequency setting
We can select 2KHz or 8KHz PWM frequency by one DIP switch.
Higher PWM frequency, will cause lower output current, higher power noise, but
more suitable for camera(No flickers for video).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>