EMERSON RP4AF Bettis RTS Relay Board Electric Actuator Instruction Manual
- June 3, 2024
- Emerson
Table of Contents
EMERSON RP4AF Bettis RTS Relay Board Electric Actuator
Revision Details June 2021
Installation, Operation and Maintenance Manual
VCIOM-15749-EN Rev. 0
Revision Details
| No. | Date | Version | Type of Change |
|---|---|---|---|
| 1 | June 2021 | 0 | General update (Migration to new template) |
Section 1: Tools
WARNING
Remove all power supplies before doing the exchange. Act always with caution
during the exchange!
- Needle nose pliers
- Screw driver Philips
- Screw driver flat
- Allen key 5
- Socket wrench 5
Section 2: Material
- 1x relay board RP4AF (ID:15772)
- 2x steel screw M3x16 (ID:952)
- 3x plastic distance 8 mm (ID:9896)
- 1x plastic screw M3x15 (ID:9895)
- 1x plastic nut M3 (ID:7084)
- 2x lock plates M3 red (ID:13674)
Section 3: Installation
Unscrew the 4 hexagon socket screws from the cover and remove it carefully.
Mind the connection cable between display and logic board.
Unscrew the 4 cross recessed screws from the existing logic board and
afterwards tilt it carefully to you.
Remove the cable with the 10-pole connector and connect it with the relay
board.
Insert plastic screw M3x15 in provided hole and add plastic distance on it,
after connect the relay board with the logic board on suitable connector. Add
plastic nut on plastic screw to
fix the board.
Put two plastic distances 8 mm between logic and relay board, insert the M3x16
steel screws through the estimated holes in logic board, plastic distances and
relay board and secure the screws with the red lock plates.
Install die logic + relay board back to the control (two small screws for
original installation will remain). Take care of possible damage of cables or
other parts.
Connect cable between display cover and logic board. Perform a Firmware update
now, before installing display cover on the unit. This update is important for
the following programming steps (use FW version display 1507, logic 219 or
higher). For a detailed description on how to perform a firmware update,
please refer to separate manual.
During display cover installation, pay attention to the O-ring which must be
sit correct between cover and housing and fix it with the 4 hexagon socket
screws.
Section 4: Programming
For programming, request download of SMARTTOOL2 through your Sales
Representative.
After the successful installation and registration, connect with the actuator.
Use the Wizard and choose function “Install Extension Kit” and press “Apply”.
At the line “RP4AF: 4x Relay Outputs” press “Apply” and confirm the
installation by pressing “Ja”.
After installation press the “Refresh Button”. In parameter group “10. Relay”
you can define the functionality of the different relay’s.
This page is intentionally left blank
World Area Configuration Centers (WACC) offer sales support, service,
inventory and commissioning to our global customers.
Choose the WACC or sales office nearest you:
NORTH & SOUTH AMERICA
- 19200 Northwest Freeway
- Houston TX 77065
- USA
- T +1 281 477 4100
- Av. Hollingsworth
- 325 Ibofanga Sorocaba
- SP 18087-105
- Brazil
- T +55 15 3413 8888
ASIA PACIFIC
- No. 9 Gul Road
-
01-02 Singapore 629361
- T +65 6777 8211
- No. 1 Lai Yuan Road
- Wowing Development Area
- Tianjin 301700
- P. R. China
- T +86 22 8212 3300
MIDDLE EAST & AFRICA
- P. O. Box 17033
- Jebel Ali Free Zone
- Dubai
- T +971 4 811 8100
- P. O. Box 10305
- Jubail 31961
- Saudi Arabia
- T +966 3 340 8650
- 24 Angus Crescent
- Longmeadow Business Estate East
- P.O. Box 6908 Greenstone
- 1616 Modder fountain Extension 5
- South Africa
- T +27 11 451 3700
EUROPE
- Holland Fasor 6
- Székesfehérvár 8000
- Hungary
- T +36 22 53 09 50
- Strada Biffi 165
- 29017 Fiorenzuola d’Arda (PC)
- Italy
- T +39 0523 944 411
For complete list of sales and manufacturing sites, please visit www.emerson.com/actuationtechnologieslocations or contact us at info.actuationtechnologies@emerson.com
www.emerson.com/bettis
VCIOM-15749-EN ©2021 Emerson. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co.
BettisTM is a mark of one of the Emerson family of companies.
All other marks are property of their respective owners.
The contents of this publication are presented for information purposes only,
and while effort has been made to ensure their accuracy, they are not to be
construed as warranties or guarantees, express or implied, regarding the
products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on
request. We reserve the right to modify or improve the designs or
specifications of our products at any time without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>