neverdark F10 Firetec Smart Fireplace Instruction Manual
- July 3, 2024
- NEVERDARK
Table of Contents
F10 Firetec Smart Fireplace
Specifications
Neverdark FIRETEC Smart Fireplace
-
European Standard EN 16647:2015 compliant
-
Power Cable: Euro Plug — WAGO
-
Dimensions (mm): Vary based on model (Refer to the table under
DIMENSIONS section) -
Weight: Varies based on model
-
Tank Volume: Varies based on model (Refer to the FEATURES
section)
Product Usage Instructions
Installation
WARNING! Ensure the smart fireplace is
installed 100% horizontally for correct operation.
-
Mounting handles securely according to the provided
instructions. -
Connect the power cable either using a Plug 220V or a WAGO
connector 220V 3×2.5mm. -
For the 220V cable connection, always consult a qualified
electrician.
Niche Preparation
WARNING! Maintain specific clearances and
distances from flammable objects.
-
Niche Dimensions: Refer to the provided
measurements for minimum requirements. -
Niche Requirements: Maintain distances to
flammable objects as specified. -
Note: Consider using a non-heat-resistant
material with Neverdark Thermobox as an alternative.
Features
Technical Information:
- Tank Volume:
- Firetec 700: 3.0 liters
- Firetec 800: 3.7 liters
FAQ
Q: What should I do if I encounter a warning sign during
usage?
A: If you encounter a warning sign, stop using
the fireplace immediately and refer to the documentation for
guidance. If needed, contact customer support for assistance.
Q: Can I use the smart fireplace without connecting it to a
power source?
A: No, the smart fireplace requires a power
source for operation. Attempting to use it without power may result
in malfunction or damage.
Neverdark FIRETEC
Smart fireplace
TECHNICAL DOCUMENTATION
CONTENT
04 CONFIGURATION 04 Standard configuration 05 Optional Extra
06 THERMOBOXES
07 FIREPLACE INTERFACES
08 DIMENSIONS
09 NICHE PREPARATION 09 Niche dimensions 10 Niche requirements
11 INSTALLATION
12 FEATURES 12 Technical information 13 Warnings
FIREPLACE
INSTALLATION TECHNICAL INFORMATION
ATTENTION! This document, along with the User Manual, is part of the device
and is being delivered along with the fireplace (hereinafter collectively
referred to as «Instructions»). If one or both of these documents weren’t
delivered with your fireplace, please contact the manufacturer prior to the
installation and / or use of the fireplace.
Make sure to read this Technical Documentation (hereinafter «Documentation»)
before using the fireplace!
Keep this Documentation in a safe place for the lifetime of the fireplace!
This appliance by design, method of operation, consumer properties and
technical safety fully complies with the requirements of the European Standard
EN 16647:2015
ATTENTION! Please follow local laws when using the appliance.
SYMBOLS
FIRE AND BURN HAZARD SIGN
A WARNING SIGN indicates a potential for property damage, personal injury, or
death
AN ATTENTION SIGN indicates important information
CONFIGURATION
Standard configuration
Smart fireplace
(Standard top panel Black glossy)
1 pc
Power cable: Euro Plug — WAGO
(fireplace length + 0.1m)
1 set
Mounting handles
2 pc
Fuel hose 1 pc
Packaging 1 pc
Documentation 1 set
standard configuration | 04
Optional extra You can add any option listed below:
Glass Border (one or two)
code GB (1, 2)
Custom Top (Matte (black),
RAL Glossy, RAL Matte, Inox)
code CT (M, RG, RM, I)
Remote Control
code RC Smart Home onnection module code SH
Enlarged Fuel Tank
code EFT
ARS (the external control and refuelling module) is available in three configurations:
Standard ARS
code S-ARS
05 | optional extra
Mini ARS (down)
code M-ARS(down)
Mini ARS (up)
code M-ARS(up)
THERMOBOXES
You can also choose the Neverdark Thermobox for your fireplace. The Thermobox
can withstand temperatures up to 200°C, allowing you to choose any material
for lining the niche.
Single-Sided
code TSS
Right Corner
code TRC
Left Corner
code TLC
Three-Sided
code TTS
Room Divider
code TRD
See-Through
code TST
thermoboxes | 06
FIREPLACE INTERFACES
Burner
No-touch sensor Control panel cover
Glow plug (candle)
Air ventilation grids
Power cable 220V
Fuel drainage unit (service only)
Power button
Touch display
07 | fireplace interfaces
Fuel hose connector
DIMENSIONS
Y
X FlamXe-l1i0ne0
Z
Standard range
Model
Firetec 700 Firetec 800 Firetec 1000 Firetec 1200 Firetec 1500 Firetec 2000
Firetec 2500
Code
F7 F8 F10 F12 F15 F20 F25
X
Length, mm
700 800 1000 1200 1500 2000 2500
Y Depth,
mm
250
Z Height,
mm
205
Weight, kg
21 24 31 35 44 58 72
dimensions | 08
NICHE PREPARATION
Niche dimensions
min 340
min 100
min X+190
min 400
270 min 220
Power outlet or connection point in a niche Cable 3×2.5
Clearance 6
Air supply 100 cm² min 20
X-10
min 50 240
mAinir10su0pcpmly² Clearance 6
227
WARNING! For correct operation of the smart fireplace, it must be installed 100% horizontally according to the level!
8 200
min 20
Clearance 6 min 20
09 | niche preparation
min 20
Niche requirements
min 1000
2 min 500
1
min 1000
miAnir10s0upcpmly² 1
WARNING! Min 1000 mm to flammable objects from any exposed side of the niche.
Min 500 mm to flammable objects from any closed side of the niche.
2
WARNING! Heat-resistant material which withstands 150°C at least.
Alternatively, a non heat-resistant material + Neverdark Thermobox
WARNING! For safe and correct operation of the fireplace it is mandatory to
provide an air supply opening (100 cm² at least) in the lower part of the
niche.
niche requirements | 10
INSTALLATION
WARNING! 220V cable connection must be carried out by a qualified electrician.
Mounting handles
Plug 220V (option 1) WAGO connector 220V 3×2.5mm (option 2)
1
2
3
11 | installation
FEATURES
Technical information
Parameters
Tank volume, l
Firetec 700
3,0
Firetec 800
3,7
Fireplace model
Firetec 1000
Firetec 1200
Firetec 1500
4,7
5,5
6,5
Firetec 2000
9,8
Firetec 2500
12,5
System volume, l
3,5
4,2
5,5
6,5
8,0
10,8
15,0
Consumption, I/h (min | max)
Average consumption, I/h (min | max)
Burning time, h (min | max)
Room size, m2 (with I without ventilation system)
Max power consumption, kW
0,35 | 0,8 0,4 | 1,0
0,6
0,7
3,8 | 8,6 3,7 | 9,3
22 | 54
27 | 68
0,55
0,55
0,6 | 1,4 0,66 | 1,5 0,9 | 2,0
1,0
1,1
1,5
3,4 | 7,8 3,7 | 8,3 3,3 | 7,2
38 | 95
41 | 102
54 | 136
0,9
0,9
1,0
1,2 | 2,5 1,9 | 4,5
1,9
3,2
3,9 | 8,2 2,8 | 6,6
68 | 170 122 | 306
1,4
1,8
Heat power, kW (min | max)
Air consumption, m3/h (min | max)
CO release, m3/h (min | max)
2,3 | 5,2 2,6 | 6,5 3,9 | 9,1 4,3 | 9,8 5,9 | 13,0 7,8 | 16,3 12,4 | 29,3
0,6 | 1,5 0,7 | 1,9
1,1 | 2,6
1,2 | 2,8
1,7 | 3,7
2,2 | 4,6 3,5 | 8,3
0,3 | 0,6 0,3 | 0,8 0,5 | 1,1 0,5 | 1,2 0,7 | 1,6 1,0 | 2,0 1,5 | 3,6
technical information | 12
Warnings
The manufacturer does not recommend placing objects that are sensitive to high
temperatures above or next to the fireplace as this may significantly shorten
their service lifetime.
In case the Technical Documentation and User Manual were not followed, the
manufacturer would not be responsible for any damage to objects above or next
to the fireplace.
ATTENTION! Kindly follow next rules while using the Neverdark fireplace:
Keep away from children; Ensure that the wall/table/floor on which you place
the appliance can withstand its weight; Install in a place protected from
draughts only; Do not cover top or side ventilation grids; Do not place
flammable objects on the appliance; Keep a carbon dioxide fire extinguisher
within sight; The use of a separate electricity line with a fuse and/or
circuit breaker is mandatory; For comfortable use of the fireplace it is
necessary to ensure the supply of a fresh air into the room, as well as
removal of a cobustion products. It can be a ventilation extractor,
recuperator or an opened window; Keep this Documentation in a safe place for
the lifetime of the fireplace!
13 | warnings
NEVERDARK LLC
11 Kopernika St. Kyiv, Ukraine
neverdark.one
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>