BOSCH MMB 63 Vitapower Series 4 Stand Mixer Blender User Manual

BOSCH MMB 63 Vitapower Series 4 Stand Mixer Blender

Product Information

Specifications

• Brand: VitaPower Serie
• Model: MMB63
• Product Type: Standmixer / Blender
• Power: Not specified
• Capacity: Not specified
• Additional Features: EasyKlick-Messereinsatz, To-Go-Mixbecher,Automatikprogramme

Pro duct Usage Instructions

Safety Precautions

Before use, ensure to clean and empty the mixing beaker. Avoid sharp objects when cleaning.
Avoid using the mixing beaker in the microwave or oven.

Getting Started

1. Prepare the mixing beaker.
2. Connect the power cord.
3. Set the desired program using the dial switch.
4. Press the program buttons to start blending.

Cleaning and Maintenance

After each use, clean the individual parts as per the provided instructions.
Do not immerse the base in water or any cleaning solution.
Use the cleaning program for easy maintenance.

Frequently Asked Questions (FAQ)

• Q: Can I blend hot liquids in the mixer?
  A: It is recommended to only blend cold or room temperature liquids in the mixer to avoid damage.

• Q: How do I troubleshoot if the blender does not start
  A: Check if the power cord is properly connected and if there is a power outage in your area before contacting customer support.

VitaPower Serie | 4

https://digitalguide.bsh-group.com?mat-no=8001312263

Scan the QR code or visit the website to open the Further Notices for Use. You can find additional information about your appliance or accessory here.en Safety

Safety

• Read this instruction manual carefully.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit. Only use this appliance:
  • with genuine parts.
  • for blending and puréeing.
  • for blending fruit and vegetables to make smoothies.
  • for crushing ice cubes.
  • for making pancake batter and sorbets.
  • under supervision.
  • for normal processing quantities and for normal processing times for domestic use.
  • in private households and in enclosed spaces in a domestic environment at room temperature.
  • up to an altitude of max. 2000 m above sea level.
• Disconnect the appliance from the power supply when:
  • not using the appliance.
  • the appliance is unattended.
  • assembling the appliance.
  • taking the appliance apart.
  • cleaning the appliance.
  • approaching rotating parts.
  • confronted with a fault.
• This appliance can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Do not let children play with the appliance.
• Cleaning and user maintenance must not be performed by children.
• The appliance must not be used by children. Keep children away from the appliance and power cable.
• Never operate a damaged appliance.
• Never operate an appliance with a cracked or fractured surface.
• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
• If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
• Call customer services. → Page 24
• Connect and operate the appliance only in accordance with the specifications on the rating plate.
• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.
• Never immerse the appliance or the power cord in water or clean in the dishwasher.
• Only use the appliance in enclosed spaces.
• Never expose the appliance to intense heat or humidity.
• Do not use steam- or high-pressure cleaners to clean the appliance.
• Never let the power cord come into contact with hot appliance parts or heat sources.
• Never let the power cord come into contact with sharp points or edges.
• Never kink, crush or modify the power cord.
• Never place the appliance on or near hot surfaces.
• Add a maximum of 1000 ml of hot or frothing food.
• Be careful when processing hot food.
• Do not lean over the appliance.
• Do not process food that is hotter than 50 °C in the To-Go blender jug.
• Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.
• Do not process food that is hotter than 70 °C in the blender jug.
• Parts which show cracks or other damage or do not fit correctly must be replaced with genuine spare parts.
• Only use the appliance once it is fully assembled.
• When cleaning and emptying the blender jug, watch out for the sharp blades.
• Never touch the edges of the blades with bare hands.
• Keep packaging material away from children.
• Do not let children play with packaging material.
• Keep small parts away from children.
• Do not let children play with small parts.
• Follow the cleaning instructions.
• Clean surfaces which come in contact with food before each use.

Avoiding material damage

• Do not operate the appliance at no load. Do not exceed maximum processing quantities.
• Never use the blender jug in the microwave or oven.
• Before use, check the blender jug for foreign objects and remove.
• Do not insert any objects in the blender jug except the pusher, e.g. knife or spoon.

Familiarising yourself with your appliance

Overview

After unpacking all parts, check for any damage in transit and completeness of the delivery.

Fig. 1 Symbols
You can find an overview of the symbols used on your appliance here.

Rotary switch
The rotary switch is used to start and stop processing and select the speed.

Tip: You can adjust the speed step lessly between and ⁠.

Safety systems

Start lock-out
Start lock-out prevents your appliance from being switched on accidentally.
You can switch on and operate the appliance once the blender jug has been cor- rectly positioned and the lid is locked.
Overload protection
The overload protection system prevents the motor and other components from be-ing damaged through being overloaded.

Operation

General information
Please bear this information in mind so that you can get the best out of your appliance.

• Observe the recommended quantities, settings, processing times and other information. “Application examples”, Page 22
• Fill the blender jug and the To-Go blender jug in the following order: liquids, seeds and nuts, fresh fruit and vegetables, leaf vegetables, frozen fruit and vegetables, ice.
• Before blending in the blender jug, cut the ingredients into cubes approx. 2 cm in size. For the To-Go blender, jug cut into cubes of approx. 1 cm.
• Use instantaneous switching to blend ingredients only briefly or in intervals.

Setting up the appliance

Setting up the appliance

• To shorten the cord, push it into the cord storage compartment.
• To lengthen the cord again, pull it out of the cord storage compartment.
• Do not insert the mains plug.

Preparing the blender jug

Notes

• Check the seal on the EasyClick blade insert. If a seal has been removed, reinsert it correctly.
• The seal remains on the EasyClick blade insert for cleaning. If the seal is damaged or not correctly positioned, liquid may run out.

Fig. 2  –  4
Processing food using the blender jug

Fig. 5  –  10

Adding more ingredients

Fig. 11  –  14

Using the pusher

Fig. 15  –  16

Emptying the blender jug

Fig. 17  –  19
Processing food using the To-Go blender jug

Fig. 20  –  27

Automatic programmes
Auto aitcThe speed and processing time for different operations are controlled by the automatic programmes.

Programme buttons
The required automatic programme is started with the programme buttons.

Programme Function
button

Note: Note the programme restrictions in the following overview depending on the attachment selected.

Fig. 28
Using the programmes Requirement:  Appliance and blender jug or To-Go Blender jug are prepared.

“Operation”, Page 21

1. Set the rotary switch to  ⁠.
   Fig. 29

   • The status display (LED) on the rotary switch lights up.

2. Press the required programme button.
   Fig. 30

   • The status display goes out and the LED on the programme button selected lights up.

3. When the end of the programme is reached, the appliance stops processing.

   • Fig. 31 ****
   • The LED on the programme button goes out and the status display (LED) on the rotary switch lights up.

4. Set the rotary switch to
   Fig. 32

Tip: To stop the programme prematurely, either press a programme button or set the rotary switch to  ⁠.

Overview of cleaning

Clean all parts immediately after use so that residues do not dry on.

• Do not use cleaning agents containing alcohol or spirits.
• Do not use sharp, pointed or metal objects.
• Do not use abrasive cloths or cleaning agents.
  Never set the blade insert down with the blade facing downwards.

Tip: Use the cleaning programme to pre-clean the blender jug.

“Automatic programmes”, Page 21 Clean the individual parts as indicated in the table.

Fig. 33
Preparing for cleaning
Separate the assembled parts before cleaning. Fig. 34  –  37

Application examples
Note: With the examples marked with the tables, leave the appliance to cool down to room temperature after 3 operating cycles.
Observe the information and values in the tables.

Blender jug

Fig. 38

Note
Restrictions on processing in the blender jug:

• Do not use it to chop ingredients like al- monds, onions, parsley and meat.
• It is only possible to mix spreads, such as peanut butter, coconut butter or nut spreads, with the pusher.
• The blender cannot be used to make mayonnaise.
• Never mix ingredients without any liquid.
• Use enough liquid when mixing solid food.
• Mix powdered food with sufficient liquid before blending, or dissolve it entirely in liquid. Examples of powdered food include icing sugar, cocoa powder, roasted soybeans, flour, protein powder.
• Add ingredients in the following order: liquids, dry products, fresh fruit and vegetables, leaf vegetables, frozen fruit and vegetables, ice.
• If the ingredients in the blender jug are not going round and being properly mixed, use the pusher to press the ingredients down.

Sample recipe
Sports drink
Ingredients:

• 250 g honey (cold, 7-9 °C)
• 5 g cinnamon
• 200 g milk (warm, 65 °C) Preparation:
• Add the honey and cinnamon to the blender.
• Blend the ingredients for 5 seconds at level max
• Add the milk.
• Blend the ingredients for 5 seconds at level max

To-Go blender jug
Fig. 39

Troubleshooting

The appliance is not working.
The mains plug of the power cord is not plugged in.

• Connect the appliance to the power supply.
  The circuit breaker in the fuse box has tripped.

• Check the circuit breaker in the fuse box.
  There has been a power cut.

• Check whether the lighting in your room or other appliances are working.

The status display (LED) flashes.
The lid or blender jug are not locked or were removed during processing.
Set the rotary switch to  ⁠.

1. Place the blender jug on the main unit and turn clockwise until it engages.
2. Turn the lid in the direction until it engages.
   The colour of the lock indicator for the lid changes from red to green.

Programme was cancelled using the rotary switch.
Set the rotary switch to  ⁠.

Appliance has a humming sound.
The blade is blocked or stiff.

• Set the rotary switch to 0.
• Remove the blockage.

Appliance switches off during use.
Processing quantity is too big or processing time was too long.

• Set the rotary switch to 0.
  

• Reduce the processing quantity.

• Allow the appliance to cool down to room temperature.

The programme does not start.
The rotary switch is not set to  .

Set the rotary switch to  ⁠.
The programme has been cancelled using the programme button.

1. Set the rotary switch to  ⁠.
2. Press the programme button for the re-quired programme.

Liquid is leaking from the blade insert.
Seal between the blender jug and the blade insert is missing.

• Insert the seal on the EasyClick blade insert.
• The seal is seated in the groove.
• The sealing lips point in the direction of the blender jug.
• The smooth sealing surface lies against the EasyClick blade insert.

The assembled To-Go blender jug cannot be placed on the main unit.
To-Go blade insert is not screwed on correctly and the safety catch prevents it from being put on.

Turn the To-Go blade insert clockwise as far as possible.
→ Fig. 21
The markings must match up.

Lid on To-Go blender jug is leaking.
Seal is missing from the lid.

Insert the seal.

Disposing of old appliance

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.
   Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service
Detailed information on the warranty period and terms of warranty in your country is available from our after-sales service, your retailer or on our website.
The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Thank you for buying a Bosch Home Appliance!

Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones: www.bosch- home.com/welcome

Looking for help? You’ll find it here.

Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts.
Find out everything about the many ways Bosch can support you: www.bosch- home.com/service
Contact data of all countries are listed in the attached service directly.

BSH Hausgeräte GmbH Carl-Wery-Straße 34
81739 München, GERMANY www.bosch-home.com
A Bosch Company
8001306169
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House
Old Wolverton Road Wolverton, Milton Keynes MK12 5PT
United Kingdom

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Welcome to MyBosch
• SERBÄ°S
• Home | BSH Hausgeräte GmbH
• Bosch Yetkili Servis | Bosch Ev Aletleri Yetkili Servisi

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>