IKEA LANGUR High Chair User Manual
- July 3, 2024
- Ikea
Table of Contents
IKEA LANGUR High Chair
Product Information
Specifications
- Brand: LANGUR
- Model: AA-2045013-5
- Language: English
Product Usage Instructions
Attaching, Removing, and Adjusting the Safety Belt
- Place the safety belt inside the highchair seat shell in a t-shape with the release button facing upwards. Ensure the straps are not twisted.
- Thread one side strap through the small opening in the back of the highchair seat shell. Fold the end of the strap at the back into a t-shape. Repeat for the other side strap and crotch bar strap. To remove, fold the end flat and push back through the opening.
- To tighten the seat belt when the child is seated, pull the end of the strap until it fits snugly but allows you to insert fingers between the child and the belt.
- To unlock, push the release button.
- To adjust the length leading up to the belt buckle, press the small button and move the buckle along the strap. Ensure the release button is unlocked.
Warning: Always use the safety belt when the child is in the highchair. Do not leave the child unattended.
FAQ
Q: What should I do if the safety belt is twisted?
A: Ensure that the safety belt is not twisted before attaching it to the highchair seat shell. Untwist any tangled sections before securing it in place.
Q: How tight should the safety belt be?
A: The safety belt should be snug enough to secure the child in place but not too tight. You should be able to fit your fingers between the child and the belt comfortably.
Q: Can I adjust the length of the belt without unlocking it?
A: No, you must ensure that the release button is unlocked before adjusting the length of the belt leading up to the buckle.
INFO
Usage Instructions
To attach, remove, and adjust the safety belt:
- Place the safety belt inside the highchair seat shell in a t-shape with the release button facing upwards. Check that the straps are not twisted.
- Take the end of one side strap and push it through the small opening in the back of the highchair seat shell, then take the end of the strap at the back of the seat shell and fold it into a t-shape to keep it in place.
- Repeat with the other side strap and the crotch bar strap. To remove each strap from the highchair, fold the t-shape end flat and then push the strap back through the small opening.
- To tighten the seat belt when the child is seated in the highchair, pull the end of the strap. You should be able to fit your fingers between the child and the safety belt without it being too tight or too loose.
- To unlock the safety belt push the release button.
- To make the strap leading up to the belt buckle longer, press the small button on the edge of the belt buckle and move the belt buckle along the strap to the preferred length.
- It is only possible to complete this step if the safety belt release button has been unlocked.
- Warning: Always use the safety belt when the child is in the highchair. Do not leave the child in the highchair unattended.
INSTALLATION INSTRUCTION
To secure the highchair seat shell to the preassembled junior chair with frame, take the highchair seat shell with fitted safety belt and:
- Push the highchair seat shell downwards onto the junior chair seat shell until you hear a click.
- Check the back of the highchair to make sure that the long opening above the red safety lock is aligned with the thin raised area on the back of the junior chair.
- Push down the red safety lock at the back of the highchair until you hear a click.
- Push the front of the highchair where it meets the junior chair until it clicks in place. There should not be a gap between the junior and highchair seat shells.
- Flip up the red safety lock under the crotch bar until it closes with a click. You will only be able to do this if the previous step has been completed correctly.
- Warning: Never lift the highchair with the child seated in it, as the child can fall out.
To remove the highchair seat shell from the junior chair:
- Unlock both red safety locks – one on the backside and one below the crotch bar.
- Hold the chair frame steady with one foot.
- Place your hand on the backside of the highchair seat shell and push forward. This will detach the highchair’s front edge from the junior chair’s front edge.
- Keep one hand on the backside of the highchair and lift the front of the highchair seat shell upwards with the other hand. When the angle is approximately 75 degrees, you will be able to lift the highchair away from the junior chair seat shell
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>