FALEBARE H60 Bluetooth Headphone User Manual
- July 2, 2024
- Falebare
Table of Contents
**FALEBARE H60 Bluetooth Headphone User Manual
**
Product Information
Package List
- FALEBARE H60 headphones
*1 - 3.5mm audio cable
*1 - USB charging cable
*1 - Flannel bag
*1 - User manual
*1 - Matte bag
*1
**Diagram
Power ON/OFF
**
- Power on : Long press M F B for 2 seconds with blue light flashing for 1 second until you hear the voice “power on”.
- Power off : Long press M F B for 5 seconds, with red light flashing until you hear the voice “power off”.
How to Pair
Step 1 :
Step 2 :
- Long press MFB for 4 seconds to enter the paring mode with red and blue light taking turns to flash and the voice “pairing” heard.
- Turn on Bluetooth function on the cellphone, search “H60” and click to pair. The voice “connected” will be heard after the successful connection.
Volume Control/Music Control
Short press +/- Volume Adjustment
Play/Pause/Answer a Call/Hang up a Call/ Reject a Call
Short press M F B/Short press M F B/Short press M F B/ Short press M F B/Long press M F B 2 s
Siri Function
Three press MFB
Clear Pairing
With the headphones on, long press Volume + keys and Volume – keys 3S
Charging
In charging : red light on Fully Charged: red light off and blue light on
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical& Electronic Equipment)
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.
MARWAY Consulting
UG (haftungsbeschränkt)
Am Maibusch 108-110,45883,
Gelsenkirchen, Germany
Email: MARWAY.UG@https://outlook.com
Telefon: 004917645084650
KOVA ASSOCIATES LTD
72a Kingston Road, Portsmouth, Hampshire,
PO2 7PA, United Kingdom
KOVA. Compliance@outlook.com
Email: ec-connection@web.de
EUBRIDGE ADVISORY GMBH
Virginia Str. 2 35510 Butzbach, Germany
eubridge@outlook.com
TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road,
Pontypridd, Mid Glamorgan, CF37 2RR,UK
tanmetbiz@outlook.com
Manufacturer : Shenzhen Jiuhu Technology Co., LTD
Address of manufacturer : 4/F Building E, BafangZhigu, Huanguan South
Road, Guanlan Street, Longhua District, Shenzhen CE CA
Made in China
FCC ID : 2A9ΟΥ-H60
FCC Statement and Notes
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of t he following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>