onn CE-2206B Wireless Earphones User Guide
- July 3, 2024
- Onn
Table of Contents
onn CE-2206B Wireless Earphones
Product Information
Specifications
- Model: A
- Dimensions: 200mm x 150mm
Product Usage Instructions
Setting up the Product
- Unpack the product and check for any visible damage.
- Place the product on a stable surface with sufficient space around it.
Operation
- Connect the necessary cables to the product following the provided diagram.
- Switch on the product using the power button.
- Adjust settings as needed using the control panel.
Maintenance
- Regularly clean the product using a soft, damp cloth.
- Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.
Frequently Asked Questions (FAQ)
-
Q: How do I troubleshoot if the product does not turn on?
A: Check the power source and ensure all cables are securely connected. If the issue persists, contact customer support. -
Q: Can I use this product outdoors?
A: This product is designed for indoor use only to avoid exposure to extreme weather conditions.
USER GUIDE
Wireless Earphones
AAWHT100069415/AAASH100069415_EN
Features
- Speaker Diameter: ø13mm
- Up to 5.5 hours of playtime per charge; +3 additional case charges = 22 overall hours of playtime.
- Model:AAWHT100069415/AAASH100069415
- Charging cable: 25cm
- Earphones will auto-pause when you remove them from your ears. When you put earphones back to your ears, the music will auto-play.
- IPX4 waterproof applies to earphones, not to the charging case.
Overview
Safety Precautions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Warning:
Changes or modifications to this unit not espressly approved by the party
responsible for compliance could void the user´s authority to operate the
equipment. Need help? We’re here for you every day from 7 a.m.-9 p.m. CST.
Give us a call at
1-888-516-2630. Produced for Walmart
Inc., Bentonville, AR 72716
FCC SAR statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the Federal Communications Commission (USA). These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported under this standard during product
certification for use when properly worn on the head.
Ver.01 24/04/24
IC：11136A-ONN69415
FCC ID：2ALVK-ONN100069415°
For product assistance
WE CAN HELP
1-888-516-2630
7 DAYS/WEEK
7:00am- 9:00pm CST
THIS GUIDE CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Find more at Walmart.com
Manufactured in Vietnam for: Walmart. Inc.
Operation
FIRST TIME SETUP
Device may need to be charged before use.
- Remove the protective film before the first use, then place both earphones back into charging case and close the lid.
- Open the charging case, earphones will power on and go to pairing mode automatically. Connect to your device by selecting “onn. True Wireless ENC”.
POWER ON & POWER OFF
POWER ON
Open charging case, earphones will auto-power on and connect to the last time
paired device. POWER OFF
Place earphones into charging case and close lid, earphones will be charged
and disconnect from your device.
Note: Without the charge case, you can also manually power on/off the earphones by touch and holding the control area for 5 seconds.
PAIRING
- If this is your first time use these earphones, follow FIRST TIME SETUP instructions.
- If you want to pair with another device, place earphones back to charging case and keep the lid open, press and hold the button at the bottom of the charging case for 3 seconds. LED light on earphones are flashing, now you can search it from another device.
PLAY MUSIC
PHONE CALLS
CHARGE
Earphones charging
Place earphones back into charging case and close the lid, earphones may take
up to 1.5 hours to get fully charged when at 0% battery.
Note: 15 mins charge can provide around 2 hours playtime.
Case charging
It is recommended˜to use the provided charging cable， connect USB-A end to 5V
power adapter or other devices, connect USB-C end to the charging port of˜the
case. Note: Device may take 2 hours to˜get fully charged when at 0%.
Cleaning & Care
CLEANING
- Wipe down surfaces with a light cloth.
- Never use abrasive pads to clean device.
- Avoid using liquids to clean device.
- Use cotton swab to clean the charge case internal area if needed, to avoid out-of-contact charging issues between earphones and charging case.
Specifications
- Weight 0.1 lb
- Product Dimensions (L x W x H) 1.94 x 0.98 x 2.08 inches
Troubleshooting
| Problem | Prevention/Solution |
|---|---|
| Cannot find “onn. True Wireless ENC” on my Bluetooth device. | Ensure Bluetooth |
function is enabled on your device.
Double check if the earphones already connected to last-time paired device.
Sound is not produced| Ensure you have earphones connected to Bluetooth
device, then increase volume from your device.
Cannot power on|
- Charge both earphone and case for enough time.
- Clean the contact area for earphones and charging case, ensure earphones contact well in the case when charging.
Only one earphone has sound Only one earphone can connect Can’t connect/pair
| Place both earphones into charging case and keep the lid open, press and hold reset button for 10 seconds, to reset both earphones and charging case. When you see red LED light flashing 3 times on earphones and charging case, it means reset successful. Follow FIRST TIME SETUP to pair again.