GMCELL F15 3 In 1 Foldable Wireless Charger Station Instruction Manual
- July 3, 2024
- GMCELL
Table of Contents
GMCELL F15 3 In 1 Foldable Wireless Charger Station
Product Usage Instructions
Setup and Installation:
Before using the XYZ-2000, ensure it is placed on a flat, stable surface near a power outlet. Connect the power cord to the device and plug it into a 120V AC power source.
Operation:
To operate the XYZ-2000, press the power button located on the front panel. Use the control panel to adjust settings as needed. Follow the user manual for specific functions and features.
Maintenance:
Regularly clean the XYZ-2000 with a damp cloth and mild detergent. Avoid using harsh chemicals that may damage the plastic material. Check for any loose connections or signs of wear and tear.
Safety Precautions:
Always unplug the device when not in use. Do not attempt to disassemble or repair the XYZ-2000 yourself. Keep liquids away from the device to prevent electrical hazards.
Fl 5 is a multiple wireless charging pad built in intelligent and advance chipset, Support mobile phones, Smart Watch, Wireless Earphone at the same time. It will bring you exceptional fast wireless charging life. If supports various mobile phones and electronic devices with wireless charging function under Qi standard.
Product Description
Product Specification
- Model FlS
- LOGO Neutral/custom
- Material Aluminum alloy/silicone
- Size 1857010.Smm
- Weight 115.6G
- Input QC 18W Type-C
- Output SW/7.SW/lOW/lSW 2.SW(Smart Watch)
- Working frequency 110-205kHz
- Conversion efficiency 80%-85%
- Transmission distance 3-8mm
Safely instruction
- Do not disassemble or throw into fire or water,to avoid causing a short circuit leakage.
- Do not use a wireless charger in severely hot. humidor corrosive environments, to avoid circuit damage and leakage phenomenon.
- Please keep the distance at least 20cm between implantable medical devices and interference with the medical device.
- To take care of the children,to ensure that they won’t play the wireless charger as a toy, to avoid unnecessary accidents.
Notes
- Please use a qualified AC adapter. The AC adapter should be 9V 12A or QC 3.0 or above, otherwise insufficient input electric current might cause unstable charging.
- Do not place too close with magnetic stripe or chip card (IDcard,bank cards,etc.)to avoid magnetic failure.
- Make sure the plate doesn’t get too hot. If the plate is too warm, take your phone off the plate, and switch the plate off. The plate may switch off automatically if it is too hot. when the plate has cooled down, try charging again.
- The led indicator will keep flashing or the charging pad will switch off by itself when charging goes wrong.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Frequently Asked Questions
Can I use the XYZ-2000 outdoors?
No, the XYZ-2000 is designed for indoor use only due to its electrical components.
How do I reset the XYZ-2000 if it stops working?
Unplug the device, wait for 5 minutes, then plug it back in. If the issue persists, refer to the user manual or contact customer support.
Is the XYZ-2000 compatible with international power outlets?
No, the XYZ-2000 operates on 120V AC power and may not be compatible with international voltage standards. Use a suitable adapter if needed.
Why the led Indicator keep tlashlng and my phone do not receive any charge?
Please make sure your mobile device is Qi-standard supported . Make sure you find the right charging position Please make sure you use 9V-2A or QC 3.0 or above AC adapter.
Why it charges slowly than my original adapter came with the mobile device?
The wireless charging current size allowed by the phone itself or external receiver coil is different. When the phone is charging, the standby power consumption is large, so it is recommended to reduce the phone standby program.
ls radiation from wireless charging harmful to one's heath?
The ns wireless charger emits non-ionizing radiation which is not harmful to humans.
My device is hot whHe charging, is it normal?
If you don't charge your device in a good charging area ,the heat dissipation may not good and it will cause your phone hot during charging. F15has overheat protection function.
watch not charged?
The watch is probably not placed in the proper position. Plsreposition the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>