Pitch Six 2A874-PORTABLE Force Board User Guide

June 3, 2024
Pitch Six

Pitch-Six-2A874-PORTABLE-Force-Board-LOGO

Pitch Six 2A874-PORTABLE Force Board

Pitch-Six-2A874-PORTABLE-Force-Board-PRODUCT

In the Package

Pitch-Six-2A874-PORTABLE-Force-Board-
FIG-1

  • Step 1: Charge the Force Board Plug the Force Board into a USB charge plug using the USB cable.
  • The device is charging when the RED LED is blinking
  • The device has a full charge when the GREEN LED is constantly onPitch-Six-2A874-PORTABLE-Force-Board-FIG-2
  • Step 2: Turn on the Force Board Click the black slider switch to the ON position.
  • Step 3: Use the Force Board Open the Force Board app on your mobile phone, define a workout, then perform the workout.Pitch-Six-2A874-PORTABLE-Force-Board-FIG-4
  • The device will communicate with the app using Bluetooth BLE.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals