Jiuyang JY – 02 2 In 1 Wireless Charger and Book Light User Guide
- July 1, 2024
- Jiuyang
Table of Contents
**Jiuyang JY – 02 2 In 1 Wireless Charger and Book Light User Guide
**
Product Using Instructions
Please read carefully before use
Product Parameters
| Product Name | 2-in-1 Wireless Charger and Book Light | Product Model | JY – 02 |
|---|---|---|---|
| Input Voltage | 12V | Material | ABS |
| Phone Output | 5W/7.5W/10W/15W | Apple Watch Output | 2.5W |
| Light Power | 4W | Product Size | 160 x 115 x 120 mm |
Packing List
Color Box, Product, 20W Adapter, Cable, User Manual.
Power Indicators
The order of indicator lights from left to right corresponds to a battery level of 0% ~ 30%, 31% ~ 50%, 51% ~ 75%, 76% ~ 100%.
Key Introduction
Power ON/OFF
Short press to turn on/off the light.
Dimming Key
Short press to adjust the brightness of the light from 10% ~ 50% ~ 100%.
Long press for stepless brightness adjustment 10%~100%.
Color Temperature Key
Short press to adjust color temperature.
Cool white, Warm white, Neutral white.
Customer after-sale service
Thank you for your purchase.
The product comes with a 12-month warranty period.
If you have any issues about the product, please feel free to contact us at
any time.
Our email is:
shenzhenchouyang@outlook.com
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or
transmitter.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance 15cm surrounding the device and 20cm above the top surface of the device must be respected.