YUQIAOFU FZS-S1PRO Printer User Manual

YUQIAOFU FZS-S1PRO Printer

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environment
• Minimum Distance: 5mm between radiator and body
• Operating Conditions: Avoid co-location with other antennas or transmitters

Product Usage Instructions

Installation:

1. Ensure the device is placed at least 5mm away from your body.
2. Avoid operating the device in conjunction with other antennas or transmitters.

Operation:

1. Ensure the device does not cause harmful interference.
2. Device must accept any interference received, even if it causes undesired operation.

FAQ

Q: Can the device be placed closer than 5mm to the body?

A: No, to comply with FCC regulations, maintain a minimum distance of 5mm between the radiator and the body.

Q: Is it safe to operate the device near other antennas or transmitters?

A: It is recommended to avoid co-locating this transmitter with any other antennas or transmitters to prevent interference.

After unpacking, please confirm that the accessories are complete

Power on the printer before use

Tip: After the printer is directly connected to the power supply, it will automatically turn on

Turn on the print service for the first time

1. .Download APP
   Scan the OR code on the device to download.

2. Click to add device
   Scan the QR code of “Scan code to add device” at the bottom of the device. (This process needs to turn on the Bluetooth of the mobile phone.)

Easy to link, free to print

1. Supports file printing of chat software such as WeChat, QQ, Ding Talk, etc.
2. Support printing in DOC, JPG, PDF, XLS, PPT and other formats. #DOC, JPG. PDF. XLS. PPT#&I#TEP
3. Support mobile phones to print documents.

Prompt

• Roll Paper: After completing a print, simply manually spread out the paper along the edge of the printer’s casing to keep it neat and aligned.
• Folding Paper: After completing a print, simply manually tear the paper neatly along the tear line to separate it.

Maintenance and replacement of consumables

Paper Roll Replacement Process

Folding Paper Replacement Process

1. Place the A4 folded paper flat on the paper tray [Precautions] *Place the side with the black alignment mark facing down;
2. Place the end with the black alignment mark close to the rear paper inlet of the printer. Insert the first sheet of paper through the rear paper inlet, aligning the front edge of the paper with the front paper outlet of the printer.

Hazardous Substances Statement

O Indicates that the content of the hazardous substance in all ho
mogeneous materials of the part is below the limit requirement
specified in GB/T 26125-201K “Limit Requirements for Restricted
Substances in Electrical and Electronic Products”.

X Indicates that the content of the hazardous substance in at least
one homogeneous material of the component exceeds the limit r
equirement specified in GB/T26125-2011 “Limit Requirements for
Restricted Substances in Electrical and Electronic Products”.

• This symbol is the pollution control symbol of electronic inform
  ation products, indicating that the environmental protection use p
  eriod of this product is 10 years, and it can be recycled and should
  not be discarded at will.

Note: The illustrations of products, accessories, user interface, etc. in this manual are schematic diagrams and are for reference only.

Due to product updates and upgrades, there may be slight differences between the actual product and the schematic diagram, plea- se refer to the actual product.

For the latest product information, please contact the official customer service.

Product information

Precautions

1. Do not pull during printing to avoid damaging the print head.
2. The printing process may cause the print head to overheat, please do not touch it directly to prevent scalding.
3. Do not use it near a fire source, outdoors under the hot sun or other hot places.
4. Do not use this product in areas where it may be exposed to liquids such as water or oil, or in areas with high humidity and dust.
5. Please be sure to use the official power adapter, otherwise, it may cause dangerous situations such as overheating and fire on the printer.
6. A three-pack policy is not available if a machine malfunctions due to the non-use of official printing paper

FCC Requirement

changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm
between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>