Inrico T710A PoC Radio User Guide
- June 9, 2024
- Inrico
Table of Contents
PoC Radio T710A
User Guide
Please read this instruction book carefully before using and keep this with
care
www.inricosolutions.com
Notes Before Using
Please read the following content carefully. It is very important for radio users to gain general knowledge and risks.
- Do not use the device or charging the battery in any hazardous areas such as gas, dust, steam, etc.
- Please turn off the device while refueling or parking at the gas station.
- Do not disassemble your radio.
- Avoid prolonged time in the sun or placing it near heating appliance.
- Avoid excessive exposure to the extreme dusty, damp and splashing place, or leave it on unstable surface.
- Reparation by professional technicians, do not disassemble by yourself.
Unpacking and Device Checking
Please unpack and take out the device and all accessories carefully, and ensure all lists have been gotten before discarding the cardboard box. If any items are lost or damaged in transit, please contact with our distributors.
Accessories
Items | Number |
---|---|
PoC Radio | 1 |
Lithium Battery | 1 |
Power Adaptor | 1 |
USB Charging Cable | 1 |
Belt Clip | 1 |
Hand Strip | 1 |
User Manual | 1 |
Handling Precautions
- Do not overcharge the battery Please stop charging if it can’t be fully charged within required time. The battery probably overheats, smokes, bursts or suddenly be on fire due to abnormal charging process. When fully charged or not charged, please disconnect the charger and unplug it from the power outlet.
- Do not discard battery in a microwave or high pressure container. The battery probably overheats, smokes, bursts or suddenly be on fire.
- Do not expose damaged battery near any fire. If the battery is broken, leaking or has an abnormal odor, please remove it from flammable areas immediately. The fluid in the battery is flammable, which may cause smoke and fire.
- Do not use abnormal battery If the battery is with odd smelly, discolored, deformed, etc., please stop charging or disassemble from the device immediately.
- Please use authorized power adaptor To comply with warranty terms and avoid damages, charge the battery using a specified charger for best performance.
Battery Care
Fully Charge Battery Before Initial Use
- Do preserve battery life by switching off a device and removing the batteries when it’s not being used, and is not expected to be used for extended periods of time.
- Do practice proper battery storage by keeping batteries in a cool, dry place at normal room temperature.
Properly Store Batteries
- Remove the battery from the device.
- Charge and discharge the battery to 40%-65% if it will not be used for 10 days or more. This can greatly extend the battery life.
- The battery should drop below 65% when it is idle for more than 10 days to prevent it from swelling.
- Store the battery in cool and dry environment that’s less than 25°C.
Features of Lithium Battery
- Battery capacity will reduce after multiple charging cycles.
- The battery capacity drops gradually even without being used.
- Longer charging time is required in shady place.
- Charging and storing lithium battery in warm condition will short its lifespan. Please do not leave them inside the vehicle or near the heater.
- If the battery working time has reduced significantly, please replace the battery immediately in avoidance of fluid leakage.
Clean and Maintenance
- Before cleaning and maintaining the device: please stop running, turn off the device, and disconnect all connections with other equipment.
- When you do not use the radio, please cover the accessories connector.
- When cleaning the dust, please use soft brush and neutral detergent (no strong corrosive chemicals) to wipe it.
- Please keep the equipment and accessories dry.
- Please do not use the microwave oven or hair dryer or other heating devices to dry them.
Product Overview
Button | Function |
---|---|
PTT Button | Push to talk |
Fl Button | Short press to increase the volume |
Long press for voice playback/ customize
F2 Button| Short press to decrease the volume
Long press for SOS/customize
OK Button| Short Press| Other interface: Confirm
Main Interface: Enter main menu
Long Press| Enter system settings shortcut/ customize
Up Button| Short Press| Scroll up
Down Button| Short Press| Scroll down
Power Button| Short Press| Other interface: Return to previous menu Main
Interface: Turn off screen
Long Press| Power on/off
Accessories Installation
- Insert SIM Card
- Attaching the Battery (a)Align the electrical contact of the battery with the rails. (b)Press the battery firmly, make sure the electrical connection touch with the bottom.
- Attaching the Battery Cover (a)Push the battery cover until it clicks into place. (b)Push the battery cover down.
- Removing the Battery Cover (c)Unfasten the notch on the bottom left and pull up the battery cover gently.
- Attaching Headset
- Install Hand Strip
Basic Functions
-
Power on/off
Power On: Long press the power button for 3 seconds and the program will start
Power Off: Long press the power button for 3 seconds. -
User Log-in
After the user log in successfully, user information will be broadcast. -
Initiate a Call
Press PTT button and start to talk.
The LED light is solid red during transmitting.
The LED light is solid green during receiving.
If the current network is not online, the green light flashes quickly.
If occupied when other person is talking, the PTT button is invalid.
Once the call time exceeds 60 seconds automatically end the call. -
Program
Use the programming tool, you need to enter the system settings, “Program” to start.Configure the network information of the Device APN/Server IP/Wi-Fi, etc.
Network Connecting
Wi-Fi Connecting
Turn on the radio, after the main screen appears, click “Settings” and find
the icon, then click into the checkbox. Make sure the “Open” button on the
right is turned on, select the wireless network, and enter the password. When
the connection is successful, you can use network services (Wi-Fi is used for
network services when there is no 4G network).
Bluetooth Connecting
After turning on the device and clicking the “Settings” icon, find the 3B
icon and click to enter the check box, click the circle on the right to make
it brighter, choose to pair with a new device, select the Bluetooth device to
be paired, and use it after the pairing is successful.
Status Indicatiors
Working Status | Led Indicator |
---|---|
Color | Lasting Time |
Transmitting | Red |
Receiving | Green |
Searching network | Green |
Low power less than 15% | Red |
Normal standby | Green |
Charging | Red |
Fully charged | Green |
Simple Troubleshooting
Problems | Solutions |
---|---|
Unable to Power On | •The battery may be incorrectly installed. Re-install the |
battery.
•The battery may be out of power. Charge or replace the battery.
•The battery may be in poor contact due to dirty or damage. Clean the
electrical contact or replace it.
Terminal Crash| •Too many APPS on processing.Force some programs to quit or
restart the terminal.
Buttons Not Working| •The buttons may not work temporarily, restart the
terminal.
•The buttons are broken, contact the dealer or our company.
White Screen Error| •Display screen may not work temporarily, restart the
device.
•The display screen is damaged, contact the dealer or cur company.
Echo or Noise During Connecting| •The signal may be weak, make sure the
terminal is within network coverage.
•The speaker may be covered, clean the speaker surface.
Unable to Detect SIM Card| •The SIM card may be incorrectly installed. Remove
and re-insert the SIM card.
•The SIM card may be not working due to dirt or damage. Clean the electrical
contact or replace it.
Unable to Locate| •The signal is weak and the radio cant receive the signal.
Move to open and flat area and try again.
Unable to Charge| •The power adapter plug may be damaged or with poor
contact.Pull out and re-plug the adapter.
•The charging cable connectors may be damaged or with poor contact. Pull out
and re-insert the cable.
Shorter Standby Time| •The battery life becomes shorter in high temperature
environment. Replace a new qualified battery.
•Power consumption increased in areas with weak signal. Please temporarily
turn off the device.
Unable to Connect the Network| •SIM card cannot work properly or cannot be
used. Make sure the SIM card have balance and not overdue.
•Mobile network is not enabled. swift on the SIM card network and contact the
network operator to activate the cellular network.
Specification
Operating System | Android 8.1 |
---|---|
Frequency | EU |
version | GSM: B2/B3/B5/B8 |
WCDMA: B1 /B5/B8
TDD: B38/840/841(120M)
FDD: B1 /B3/135/B7/B8/B20/1328A/B28B
US
version| GSM: B2/133/135/B8
WCDMA: B2/B4/B5
TDD: B38/840
FDD: B2/B3/B4/B5/B7/138/B12/B17/B28A/ B28B/B66
Support| WIFI BT GPS
CPU| MTK6739V/WA
Memory| 512MB(RAM)+ 4GB(ROM)
Voltage| 4.2V
Screen Size| 1.77 inches,128 x 160
Battery| 4000 mAh
Dimension (I-I•W*D)| 138 x 63.1 x 29mm (not including belt clip )
Weight| :–185g
Working Temperature| -10°C — 60°C
Storage Temperature| -20°C — 70°C
FCC Caution: Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
For body worn operation, this device has been tested and meets the FCC/ISED RF
exposure guidelines when used with an accessory designated for this product or
when used with an accessory that contains no metal. For face up mode, please
keep the device minimum 10mm to the face when normal use.