SoulMic SH006 Bluetooth Headphones With Music Controls User Guide

SoulMic SH006 Bluetooth Headphones With Music Controls

Specifications

1. Working voltage: DC 3.7V
2. Charging power: DC 5V
3. Frequency range 20HZ 20kHz
4. Charging time: 2 .5 hrs
5. Playtime: 36 40 hrs (70%
6. BT version: 5.4
7. Support format: SBC AAC
8. Mic Sensitivity: 32db
9. Working range: 10 15 Ms

When the headphone is running out of battery ,an alarm sound will be heard.Pls charge the battery immediately.

Power ON/OFF

1. Power on :Slide the power button to ON,then the indicator will glow red and blue. It is ready for wireless connection.
2. Power off:Slide the power button to OFF,then the indicator will turn off.

BLUETOOTH GUIDANCE

Bluetooth mode offers the features of hands free function and wireless music player When you turn on the headphone, the indicator light glow blue and red, turn on the Bluetooth f unction on your phone, search the device name SoulMic Headphones and select it to connect. After successful connection, the blue indicator keep on, it is flashing blue when playing music.

Wireless Mode

1. While the headphone connected to your cell phone a call comes in Quick press the Phone button once to answer press again to end the call.

2. To make a phone call
   While the headphone is connected to your cellphone double short press the play/pause button to make a call which the last number you dial or answer list on your phone.

3. Reject a call
   Hold the phone button for 2 seconds and then release to reject the call.

4. Play/Pause music
   Short press the Play/pause button to Play / pause the music.
   Short press the (+)or(-) go the track you want to play with
   Long press the (+)or(-) button to obtain the volume level you want to be.

Wired headphone function

To work as a wired headphone Plug the 3.5mm cable to ‘line in ’port and plug the other side to the computer or other music device then could work as a wired headphone. While in this function, Bluetooth function could not work.

CAUTION:
Do not use the headphone while under charging.

1. Power on :Slide the power button to ON, the headphone turn on automatically
2. Power off: Slide the power button to OFF, then the headphone will turn off.
3. Voice assistant: Double short press the M button to activ ate Siri or voice assistant ( only support the device with voice assistant function)
4. Reset the headphone: turn on the phone, press the the buttons at the same time to back to default mode.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

ISED Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

IC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>