dbramante1928 CP20ACBL7110 Re Charge Power Bank Instructions
- June 28, 2024
- dbramante1928
Table of Contents
dbramante1928 CP20ACBL7110 Re Charge Power Bank
WEEE
The crossed-out wheelie bin symbol on the appliance or its packaging
indicates that the product at the end of its useful life must be gathered
separately from other waste to allow proper treatment and recycling.
It is forbidden to dispose of waste electrical and electronic equipment as
municipal waste, this is also highlighted by the symbol shown on the product
and/or packaging. These waste products are subject to separate collection
arranged by municipalities or can be returned to the retailer when purchasing
a new appliance of the same type. Improper disposal or misuse of the equipment
or parts thereof may be harmful to the environment and to health due to the
presence of hazardous substances. The illegal disposal of said waste is
penalised in accordance with the current legislation.
INFORMATION FOR SAFE USAGE OF THE PRODUCT
Always keep and follow the instructions given to ensure the safe use of the product and other connectable devices. Use the product and its accessories only for their intended use and in compliance with the declared electrical characteristics and in indoor/protected environments to avoid serious dangers. Keep away from heat, direct sunlight, humidity and liquids. The product must not be used by children or persons unable to understand any potential danger. Do not leave the product connected to the network or to other devices when it is not in use or in cases of suspected fault. Never disassemble the product or attempt to repair it in the event of a defect. Avoid using the device in proximity to electro-medical devices (e.g. pacemakers). Contact the DBRAMANTE1928 customer service department if you have any doubts regarding the operation, safety or connection method of the product.
Implementation of the WEEE
Directives 2012/19 / EU and 2006/66 and subsequent amendments.
COMPLIANT
The charger’s wide input range (AC 100-240 V, 50/60 Hz) allows it to be used
around the world. Please note that an additional travel adapter must be used
depending on the specific country and continent to ensure that the de- vice
correctly connects to the various types of electrical sockets.
WARRANTY
5 YEARS warranty, keep your ticket – This warranty will not apply if, to the exclusive criterion of dbramante1928, the charger shows damage caused by traffic, handling, storage, accidents, abuse or misuse, or if it has been installed, used or handled in an improper manner. to the Product Safety Manual, if it has been altered in any way, or if the serial number has been removed or is illegible, or repaired by anyone not authorized by dbramante1928, will void this warranty.
SPECIFICATIONS
- Input: USB-C1:PD18W(DC 5.0V/3.0A,9.0V/2.0A,12.0V/1.5A)
- Output:
- USB-C1:PD20W(DC 5.0V/3.0A,9.0V/2.22A,12.0V/1.67A)
- USB-C2:PD20.0W(DC 5.0V/3.0A,9.0V/2.22A,12.0V/1.67A)
- USB1: QC3.0 18W (DC 5.0V/3.0A,9.0V/2.0A,12.0V/1.5A)
- USB2: QC3.0 18W (DC 5.0V/3.0A,9.0V/2vA,12.0V/1.5A)
- Total Output: DC 5.0V/3.0A Max
- Dimension 147 x 68 x 29 mm
- Weight 417g
CUSTOMER SERVICE
[email protected]
© 2024 dbramante1928 ApS Bygmarken 2A, 3650 Ølstykke.
Declaration of Conformity
- Model No., trademark: CP20ACBL7110
- Name and address of the manufacturer: dbramante1928 ApS – Bygmarken 2A, 3650 Ølstykke, Danemark.
- This declaration of conformity is issued under the sole responsibility of the manufacturer.
- Object of the declaration: portable rechargeable battery “powerbank”
- The object of the declaration described above is in conformity with the relevant Union harmonisation legislation directive and Other Union harmonisation legislation where applicable:
- EU Battery Directive 2006/66 and Amendment 2013/56 EU & EU Battery Regulation 2023/1542
- EC REACH Regulation (EC 1907/2006)
- EU POP Regulation 2019/1021
- References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared.
- EN IEC 60086-1, EN IEC 60086-2, EN IEC 60086-5
- ANSI C18.1M Part 1, ANSI C18.1M Part 2,
CARE AND CLEANING
Disconnect the product from the power supply before cleaning. Do not clean
it with water or immerse it in water. Never use aggressive detergents, rubbing
functioning of the product. Use a dry, lint-free cloth to clean the product.
Always keep the mains plug and the mains socket clean.