ARMITRON 2BFCD421001ECL Smart Watch User Manual
- June 1, 2024
- Armitron
Table of Contents
ARMITRON 2BFCD421001ECL Smart Watch
PRODUCT INFORMATION
- Operating temperature: 14°F to 122°F
- Non-operating temperature: -4°F to 140°F
- Product: Armitron Connect (Eclipse/Link/Wave/Apex/ Sync/Matrix/Quantum) Smartwatch
FCC ID
- ECLIPSE: 2BFCD421001ECL
- LINK: 2BFCD421001LNK
- WAVE: 2BFCD421003WAV
- APEX: 2BFCD421004APX
- SYNC: 2BFCD421005SYN
- MATRIX: 2BFCD421006MTX
- QUANTUM: 2BFCD421008QTM
- UNPACK CONTENTS
Remove the smartwatch and charging cable from its packaging.
FULLY CHARGE THE SMARTWATCH
Before initiating the setup process, ensure that your smartwatch is fully charged.
Note: Charging may take up to 2 hours.
CHARGING THE SMARTWATCH
Align the gold pins on the charging cable with the gold contacts on the back
of the smartwatch; they will magnetically connect. If you encounter
resistance, flip the cable around.
The magnetic charging cable will effortlessly latch into place.
CHARGING THE SMARTWATCH (CONT.)
Plug the charging cable into a UL-certified wall charger or a computer USB
port.
Note: Avoid using fast chargers. Once fully plugged in, the smartwatch
screen will display “charging.”
DOWNLOAD THE ARMITRON CONNECT APP
Scan the QR code using your smartphone camera to access and download our free ARMITRON CONNECTmobile app to set up your smartwatch.
PAIRING YOUR SMARTWATCH
Power on your smartwatch (press and hold the side button for 5 seconds), then open the ARMITRON CONNECT app. Tap the watch icon located on the bottom bar to start pairing. Select
“Add Device” and choose your smartwatch. Ensure that the pairing code
displayed on the app matches the one on your smartwatch screen. Pairing will
synchronize the time and date on your watch.
Note : Activate Bluetooth on your phone, and only pair your watch using
the mobile app.
VISIT US ONLINE
For access to the full user manual, assistance, and answers to frequently
asked questions,
please visit us online:
Love Every Second with your new smartwatch!
FCC
FCC REGULATORY COMPLIANCE
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with the FCC’s RF radiation exposure limits for an
uncontrolled environment.
The end user must follow the specific operating instructions to satisfy RF
exposure compliance. This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
LIABILITY
ARMITRON CONNECT cannot be held liable for material damage or personal injury caused by incorrect handling or non-compliance with safety instructions.
This device and its accompanying software are not meant for medical use, including diagnosing, treating,mitigating, or preventing diseases or conditions, or for any other medical purpose.
DISPOSAL OF GOODS
Electrical products, batteries & accumulators should not be disposed of in the household waste.
If you cannot reuse or recycle your article, it should be disposed of at a civic amenity site or a local authority recycling facility. Do not dispose of your ARMITRON CONNECT product within household waste. Disposal of the packaging & your ARMITRON CONNECT product should be done in accordance with local regulations. Batteries are not to be disposed of in municipal waste & require separate collection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>