IKEA STYRBAR Zigbee Remote Control Instruction Manual
- June 27, 2024
- Ikea
Table of Contents
IKEA STYRBAR Zigbee Remote Control
Specifications
- Type: E2001
- Name: STYRBAR Remote control stainless
- Type: E2002, E2313
- Name: STYRBAR Remote control white
- Input: 3V, 2x AAA/HR03 LADDA batteries
- Range: 10 m in open air
- Operating frequency: 2405-2480 MHz
- Output power: 12.6 dBm (EIRP)
- IP-class: IP44
Product Usage Instructions
Getting Started
Download the IKEA Home smart app and follow the on-screen instructions to
add the product to your IKEA Home smart system.
Remote Control Functions
- Short press to turn it on. To dim up, press and hold the button.
- Short press to turn it off. To dim down, press and hold the button.
- Change the white spectrum or colors.
Pairing Instructions
To add light sources to the remote control:
- Ensure the light source is installed and the main power switch is on.
- Hold the remote control close to the light source (<5 cm away).
- Press and hold the pairing button for at least 10 seconds until a red light shines on the remote control.
- The light source will dim and flash once to indicate successful pairing.
Factory Reset and Synchronization
For factory reset
- Light sources: Toggle the main switch 6 times.
- Remote control: Press the pairing button 4 times within 5 seconds.
If unsynchronized, long press the left buttons to return the light source to default settings (2700K).
Battery Replacement
When the battery needs replacement:
- A red LED indicator will flash when any button is pressed.
- Open the battery lid and replace it with two new AAA/HR03 batteries.
Care Instructions
To clean the remote control, wipe with a soft cloth moistened with mild
detergent. Use a dry cloth to wipe dry. Avoid abrasive cleaners or chemical
solvents.
For Apple devices, download the app using the App Store. For Android devices, download the app using the Google Play store.
Note:
If you have a TRÅDFRI gateway please use IKEA Home Smart 1 app.
Getting started with DIRIGERA hub
Download the IKEA Home smart app and follow the instructions on the screen to
add the product to your IKEA Home smart system.
Remote control functions
- Short press to turn it on. To dim up, press and hold the button.
- Short press to turn it off. To dim down, press and hold the button
- Change the white spectrum or colors.
- Pairing: Add IKEA Smart Lighting products to your system. See the instructions below.
Adding devices to your remote control
When the remote control is sold together with a light source (in the same
package), they are already paired. If the remote control is purchased
separately, you must manually pair it to your light source.
To add light sources, just repeat the steps below.
- Make sure that your light source is installed and the main power switch is turned on.
- Hold the remote control close to the light source you want to add (no more than 5 cm away).
- Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the remote control. Your light source will begin to dim and flash one time to indicate that it has been successfully paired.
Up to 10 light sources can be paired with 1 remote control. Make sure to pair them one at a time. If the light sources are close to each other, disconnect those that have already been paired from the main power switch.
Factory reset your devices For light sources
Toggle the main switch 6 times.
For remote control
Press the pairing button 4 times within 5 seconds.
Synchronizing
If your light source becomes unsynchronized, a long press on the left (<) or
right (>) buttons will return the light source to its default setting (2700K).
Changing the battery
- When the remote control is used regularly and as intended, the batteries will last for approximately 2 years.
- When it’s time to replace the battery, a red LED indicator will flash when you press any button on the remote control. Open the battery lid and replace the battery with two new AAA/HR03 batteries.
Caution
Risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
Important
• The remote control is for indoor use only and can be used in temperatures
ranging from 0ºC to 40 ºC.
• Do not leave the remote control in direct sunlight or near any heat source,
as it may overheat.
• The range between the remote control and the receiver is measured in open
air.
• Different building materials and placement of the units can affect the
wireless connectivity range.
Care instructions
To clean the remote control, wipe with a soft cloth moistened with a little
mild detergent. Use another soft, dry cloth to wipe dry.
Note!
Never use abrasive cleaners or chemical solvents as this can damage the
product.
Recommended battery types
- 2 x IKEA LADDA 900 (AAA/HR03, 1.2V, 900mAh, Ni-MH) (Not included)
- Do not mix batteries of different capacities, types, or date stamps.
TECHNICAL DATA
- Type: E2001
- Name: STYRBAR Remote control stainless
- Type: E2002, E2313
- Name: STYRBAR Remote control white
- Input: 3V, 2x AAA/HR03 LADDA batteries
- Range: 10 m in open air.
- For indoor use only Operating frequency: 2405-2480 MHz
- Output power: 12.6 dBm (EIRP)
- IP-class: IP44
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
Declaration of Conformity
Hereby, IKEA of Sweden AB declares that the radio equipment type
E2001/E2002/E2313 complies with Directive 2014/53/EU. The full text of the EU
Declaration of Conformity can be found at http://www.ikea.com
- Choose the country you are in
- Search your product in the search field
- Go to Assembly Instructions and Manuals (downloads) Here will you find a pdf file of the full doc.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling by local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
FAQ
Q: How long do the batteries last?
A: When used regularly and as intended, the batteries last for
approximately 2 years.
Q: How many light sources can be paired with one remote control?
A: Up to 10 light sources can be paired with one remote control. Pair them
one at a time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>