KRAUSE 212269 STABILO Slot Stabiliser STABILO Nut Traverse Instructions
- June 9, 2024
- KRAUSE
Table of Contents
KRAUSE 212269 STABILO Slot Stabiliser STABILO Nut Traverse
Product Information
The product is a stabilizer that is available in two sizes, 1000 mm and 1250 mm. The stabilizer is manufactured by Krause Systems, and it comes with the following article numbers: Art. No: 212252 (1000mm) and Art. No: 212269 (1250mm). The stabilizer is designed to be used with ladders for added stability and safety.
Product Usage Instructions
Before using the stabilizer, make sure to read and understand the instructions provided in the user manual.
- Place the ladder horizontal on the floor.
- Insert the four screws into the stabilizer and shift two screws to the left and two screws to the right (please see picture 1).
- Assemble the stabilizer close to the rail ends.
- Raise up the ladder and adjust the stabilizer in that way that the ladder foot caps and stabilizer footcaps are standing in equal measure on even ground (picture 2).
Remember to always use caution and follow safety guidelines when using ladders and ladder accessories.
OVERVIEW
DIMENSIONS
Instruction manual for stabilizer
Assembling
- Place the ladder horizontal on the floor.
- Insert the four screws into the stabilizer and shift two screws to the left and two screws to the right (please see picture 1)
- Assemble the stabilizer close to the rail ends.
- Raise up the ladder and adjust the stabilizer in that way that the ladder foot caps and stabilizer footcaps are standing in equal measure on even ground (picture 2).
560016 © 2021 Copyright by KRAUSE-Werk Alsfeld
References
Read User Manual Online (PDF format)
Loading......