YiDianTong Y-D002-600 GC B Controller User Guide

June 27, 2024
YiDianTong

YiDianTong-logo

YiDianTong Y-D002-600 GC B Controller

Product Information

Specifications

  • Model: XYZ-2000
  • Power: 1200W
  • Capacity: 1.5 liters
  • Material: Stainless steel
  • Color: Silver

Product Usage Instructions

Initial Setup
Before using the XYZ-2000, make sure to wash the stainless steel container with mild soap and water. Rinse thoroughly and dry before use.

Filling the Blender
Ensure the blender is unplugged. Open the lid of the blender and carefully pour in the ingredients you wish to blend. Do not exceed the maximum capacity of 1.5 liters.

Operating the Blender
Close the lid securely before plugging in the blender. Select the desired speed setting or program on the control panel. Press the power button to start blending.

Cleaning and Maintenance
After each use, unplug the blender and disassemble the parts. Wash the container, lid, and blades with warm soapy water. Dry thoroughly before reassembling.

Frequently Asked Questions (FAQ)

  • Q: Can I blend hot liquids in the XYZ-2000?

    • A: It is not recommended to blend hot liquids in this blender to avoid pressure buildup and potential accidents.
  • Q: How do I troubleshoot if the blender is not turning on?

    • A: Check if the power cord is properly connected and if the power outlet is functioning. Ensure the lid is closed securely as some blenders have safety features that prevent operation if not closed properly.

GC B Controller

User Guide

YiDianTong-Y-D002-600-GC-B-Controller-image \(1\) YiDianTong-Y-D002-600-GC-B-Controller-image \(2\)

About Charging
Fully charge the controller before use. (*Ensure the controller’s power switch is turned on during charging.)

YiDianTong-Y-D002-600-GC-B-Controller-image \(3\)

How to Pair
Step 1.
Ensure the controller is switched off.
Step 2. Toggle the power switch to the “ON* position, confirm the device for pairing, select the appropriate pairing mode(consult the table below for the corresponding pairing mode), and observe the corresponding LED flashing rapidly.
Step 3. Search for the Bluetooth controller/gamepad on the device you wish to pair with, and then click “Connect”. Once paired, the LED will remain lit, indicating a successful connection.

YiDianTong-Y-D002-600-GC-B-Controller-image \(4\)

Other Functions
Vibration Intensity Adjustment: After successful pairing in any mode, press and hold the “Z/ZL” button and press the “+” button to increase or the “-” button to decrease (20%, 40%, 70%, 100%, 0%).

Important Notes

  1. When switching between different devices, Restart the controller, and toggle the “power switch” off and on once to clear the memory. For example, if you have used the X-input Mode on a PC and are switching to a Nintendo Switch Console, restart the controller, and toggle the “power switch” off and on once first, and then re-pair.
  2. If the controller is in pairing mode, but the Console cannot find the controller, please turn off the Console’s Bluetooth switch and then restart the search, or restart the Console device.

LED Indicator Guide

  1. Turn on the “Power Switch,” press the “HOME” button, and the LED will flash slowly, indicating that the controller is powered on and in the previous paired reconnection mode. If the host has been paired before and is turned on, it will automatically reconnect.
  2. A steady LED indicates a successful controller pairing. In Nintendo Switch Mode, the four LED indicators will display the controller’s channel (requires host channel display function).
  3. A steady LED indicates a successful controller pairing. In D-input Mode, LEDs 2 and 3 remain steady; in X-input Mode, LEDs 1 and 4 remain steady.
  4. While the controller is paired and in use, a slow, periodic LED flash (approximately every 2.5 seconds) indicates a low battery and requires charging.
  5. During charging, the LED flashes at a relaxed pace (approximately every 2.5 seconds), and the LED goes out when fully charged.

General Troubleshooting

  1. No Charging Indication : *Ensure the controller’s power switch is turned on during charging; it will not charge while the controller is turned off.
  2. Pairing Issues: *Confirm your device is compatible and ensure the correct pairing mode is selected.
  3. Rumble Feature Not Working: *Rumble feature functionality depends on the games and software being used. For Windows PC running Dolphin emulator, activate the rumble feature by selecting X-input mode and configuring additional settings in the emulator.
  4. No response when using on MacOS : * Please Restart your Mac after pairing.
  5. Re-pairing failed : * Whenever you change devices or pairing modes and need to re-pair, please delete the existing controller record from the Bluetooth device history list first. Then, proceed to pair the controller step by step as if it were the first time.
  6. Pairing issue with Nintendo Switch : * If you encounter pairing issues with the Switch, resolve them by using the included USB-C cable to establish a wired connection, similar to the Nintendo Switch Pro controller.

RF exposure statement
This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals