Lessmore W100 Magnetic Power Bank User Manual
- June 28, 2024
- Lessmore
Table of Contents
. Magnetic POWER BANK
Product Manual
W100 Magnetic Power Bank
Thanks for choosing us !
This product is magnetic wireless power bank .which can provide magsafe
wireless charging for iPhone t2 / 13/14/15. He supports both wireless and
wired fast charging. It’s o aluminum alloy design. itis very concise and cool.
If you choose a metal bracket or card bracket. it is easier for charging and
viewing.
ABOUT WIRELESS CHARGER
SPECIFICATIONS
Capacity : 5000mAh
Input(USB-C) : 5v 24A.9v 2.2A
Output(UsB-C) : 5v 2.4A.9V 2.2A.12V 1.54
Wireless Charge : 5w 7,Sw 1Ow 15w(MAX)
Note:
QC3.0/ PO Quick Charge wall adapter (18W ) required for Fast Charge Mode.
GUIDE ON HOW TO USE IT
-
INPUT:
Connect the Power bank to the QC3.0/PD fast charging wall odapter. You can use USB-C Port io charge for ihe Power bank. 4 Power lights ore used to display the capacity of the battery, each light represents 25%.
-
OUTPUT: (WIRELESS CHARGIING)
When the phone fits into the wireless charging area. the wireless charging will automaticaily start. During wireless charging, the wireless light is always on.
Note:
When the room temperature is above about 26” C. Wireless charge The iPhone to 80%, due to Apple’s battery protection function, the wireless charging efficiency becomes slower.
OUTPUT: (USB-C CHARGIING)
The USB-C port supports QC and PD fast charge output. Connect the USB-C port to the mobile phone, the mobile phone can be quickly charged.
The 4 power lights represent the battery level, each light represents 25%. When the orange light is on, charging enters fast charging mode.
-
Metal FOD: (Foreign Object Debris)
When the light flash quikly , it shows Metal FOD(Foreign Object Debris) on the surface oritis not working properly. Please remove the device and FOD immediately .thenrestart the product for reuse. -
NTC Protection: (Negative Temperature Coefficient protection)
When the product is overheated, NTC will start overheat protection, 4 Power lights will flash and stop charging.
You need to remove the phone and wait for the temperature to drop. then press the button again to restart the charging function.
COMPATIBILITY
Compatible Models: Atl Qi-enabled phones and devices.
Magnetic Charging Mode: All iPhone 15, 14, 13, & 12 models.
For all other mobile phones a magnetic protective case is required.
PLEASE NOTE
- Generally, the full charge of the mobile phone is 3-4 hours. Please remove the mobile phone immediately after the mobile phone is full to avoid overheating. Please do not charge the phone continuously for days!
- Please try to align the phone with the surface dots to improve the charging efficiency. If the charge is unstable or not charging, adjust the phone position.
- If the phone case is too thick, please remove the case to increase the charging efficiency.
- It’s normal for your device to get slightly warm during the inductive charging. It has an overheating protection functi on inbuilt.
- Do not place metal objects. magnetic cards, and metal phone cases on the charging pad, as this may cause damage or the charger may not work. Compatible with most kinds of phone cover cases, including rubber cases, hybrid cases, plastic/TPU/PC cases ect.
- Do not place the charger closely to the magnetic stripes or chip cards (!D cards, bank cards) to avoid magn etic failure.
- Make sure that the pad doesn’t get too hot. If it does, take your phone away from the pad, and switch the charger off; when the piate has cooled down try charging again.
Warranty
We provide warranty service in case the device does not work under normal use
and identified by our company service commitment.
The manufacturer accepts no responsibility and the guarantee will not apply in
the following conditions:
- Improper work of the wireless charger due to the user’s fauit.
- Manual disassembly of the device.
- Improper device repair in unauthorized services.
- Damage caused by the actions of the user.
- Malfunctions caused by reasons beyond the control of the manufacturer such as power supply fluctuations, natural phenomena and natural disasters, fires, water-flood, interference with foreign objects or liquids in the device.
- Inappropriate use of the appliance in any unforeseen way.
ENVIRONMENT PROTECTION FIRST!
Do not throw away the device with the normal household waste at the end of its life, but take it to the authorized recycler for disposal. By doing this,you help to preserve the environment.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmfulinterference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and. if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occurin a particular
installation, If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.