Yinbeiqi Art 1 Pro EarBuds User Manual

User Manual
Art 1 Pro

Product Overview

Product Specifications

Instructions

from the charging box. The headset is automatically powered on and enters pairing status.
Manual power-on| When the headset is turned off, touch the headset (L) and the headset (R) for about 5 seconds, accompanied by a “power on” tone.
Auto power-off| Put the headset into the charging box, close the charging cover, and the headset is disconnected from the mobile phone, automatically powered off, and enters charging status.
Automatic re-connection| After the earphone are powered on, they are actively re-connected to the last paired devices.
Functions| Instructions
Play or pause music| When the music is being played, touch the earphone (R) twice to pause the music, or repeat the same operation to play the music again.
Previous Track| When the music is being played, touch the left earphone (L) three times to play previous track. with an electronic prompt tone.
Next Track| When the music is being played, touch the right earphone (R) three times to play next track. with an electronic prompt tone.
Functions| Instructions
Answer a call| When there is an incoming call, touch the left earphone ( L) or right earphone ( R) twice to receive the call. with an electronic prompt tone.
Reject a call| When there is an incoming call, touch left earphone (L) or right earphone (R) three times to reject the call. with an electronic prompt tone.
Terminate a call| During a call,touch the left earphone (L) or right earphone (R) twice to terminate the call. with an electronic prompt tone.
Cancel outgoing call| When the call is made, touch the earphone (L) and earphone (R) twice to cancel the outgoing call,with an electronic prompt tone.
Functions| Instructions
Enable/Disable Voice Assistant| When the headset is playing music/standby, touch the headset (L) two times to activate the voice assistant, and repeat the operation to cancel the voice assistant. (When using only one headset, touch the earphone (L) or earphone (R) twice will switch to play/pause function.)
Clear the pairing record| Touch the earphone (L) and the earphone (R) for 4 times in the power-on pairing status, accompanied with a “beep” tone, then the earphones will power off with “power off” tone

Troubleshooting

sure the headset is not out of battery.If the headset is out of battery, please charge it for more than 30 minutes before turning it on.
The earphone cannot be charged.| The earphone metal contacts are not well connected to the charging box pins.| Take out your earphone and adjust the metal contact angle, and then put it back into the charging box. Ensure that the metal contacts are well connected to the charging box pins.
The earphone cannot be powered off.| The earphone program is in error due to an incorrect operation.| Put the earphone into the charging box and reset the earphone.
The earphone cannot be searched or pairing fails.| The earphone does not enter the pairing state.| Enable the earphone to enter the pairing state.
The Bluetooth application of the cell phone is in error.| Restart the cell phone and pair the cell phone with the earphone.

Tips

• To extend the service life of the battery, you are advised to charge the earphone at least once a month.
• Please use the charger provided by company to charge the earphone. Use of other low-quality chargers may bring about dangers.
• Adjust the volume to an appropriate degree when using the earphone.
• DO NOT wear the earphone when sleeping; otherwise, the earphone may be damaged or cause injuries to you.
• When driving, you are advised to use the Bluetooth earphone to ensure your driving safety. It is dangerous to directly use cell phones when driving.
• Keep the earphone away from kids. Small components of the earphone may cause suffocation or other injuries to kids.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>