DRAGONGLASS DGC3 2A7HY-DGC3 Wireless Network Card Installation Guide

DRAGONGLASS DGC3 2A7HY-DGC3 Wireless Network Card Installation Guide

Hardware installation

There are two ways to install the network card;
Note: The picture is a simplified schematic diagram, please refer to the actual product for details.

1. Computer; Insert the network card directly into the USB port of the computer
2. Connect the computer USB port through the USB extension cord base (the USB extension base needs to be purchased separately);

Note: When using a desktop computer, it is recommended to use a USB extension cord base to connect to the port on the back of the computer case (some desktop ports have insufficient power supply or cannot be used), and extend it to the Desktop computer USB ports.

Driver Installation

1. Open the driver folder and select the corresponding driver according to the system version, for example: double-click
   DRAGONGLASS set x64.exe on a 64-bit system to open the installer; (If there is no CD-ROM driver, please go to the official website http://www.sz- DRAGONGLASS.com to download and install the driver)

2. Then the driver will Automatically install.

3. After the installation is completed, it is recommended to restart the computer. If there is work in progress or files being written, you can restart it later. If there is nothing else, it is recommended to restart immediately;

4. After restarting, the driver installation is complete, you can move the mouse to My Computer, right-click and select Manage to enter the management interface to view the driver status;

5. After entering the management page, click Device Manager, Network Adapter in tum, you can see the installed network card driver (Note: This step requires the network card to be connected to the computer to see it.

6. Double-click to view the device details. If there is no abnormality, the driver is running normally as shown in the figure below and the driver details can be viewed;

Network connection settings

1. After confirming that the driver is installed correctly, you can double-click the wireless network card icon ail in the lower right corner, and click the icon with the left mouse button. The computer will display the connectable wireless
2. Click the wireless network you want to connect to and enter the password to connect.

Network connection status

1. After the network is connected, the computer system icon will change to wil, and then you can right-click the icon and select “Open “Network and Internet” settings” to enter the setting selection interface.
2. Click the “Wi-Fi” option, and then click Show connected wireless, you can view the current IP, MAC address, gateway, driver version, etc. of the wireless.

Maintenance Regulations

Dear Valued Clients,

Thank you for purchasing DRAGONGLASS products. To protect your rights and interests in after-sales service, please read the following maintenance regulations.
The following do not belong to free maintenance, our company can provide paid service, please note:

• Failure to require the installation manual, use, maintenance, and storage led to product failure or damage;
• Bevond the limited warrantv. the warranty period: unauthorized interaction, tet, up is producer code:
• Without authorization to change the settings file or inherent disassemble;
• Unexpected factors or human actions lead to product damage, such as improper input voltage, temperature, water mechanical damage, break, rust, or oxidation product of serious, etc;
• The damage caused by the transportation, loading, and unloading caused by the customer’s return for repair; the product failure or damage caused by force majeure such as earthquake, fire, lightning, etc.; Other non-product itself, design, technology, manufacturing quality, and other quality problems caused by the failure damage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>