Gaoyi X24 15W Magnetic Wireless Car Charger Mount User Manual
- June 26, 2024
- Gaoyi
Table of Contents
Gaoyi X24 15W Magnetic Wireless Car Charger Mount
Specifications:
- Product Name: 15W Magnetic Wireless Car Charger Mount
- Model: PD30W
- Compatibility: Universal Wireless Charging Car Mount
- Input: Type C
- Wireless Charging Output: Up to 7.5W for iOS devices
- Extendable Length: 115mm to 165mm
- Cable Length: 1m Type-C
- Compatibility: Official MagSafe case or Magnetic case for iPhone 12 or later series
Temperature Management:
- If your iPhone is too hot or cold, move it to a suitable environment to resume charging.
- If a temperature warning appears, turn off your device, place it in a cooler spot, and allow it to cool down before use.
FAQ:
Q: What devices are compatible with the charger mount?
A: The charger mount works with devices that support MagSafe R and have a
compatible case, specifically designed for iPhone 12 o later series.
15W MAGNETIC WIRELESS CAR CHARGER MOUNT
X24+DB49+M7+C81C
Universal Wireless Charging Car Mount
Car Charger Features
- Material: ABS+PC
- Input: DC 12-24V⎓3A
- Total Output:30W max
- Type C Output:5V⎓3A 9V⎓3A 12V⎓2.5A PPS:3.3-11V⎓3A
- Smart IC for auto-voltage detection
Wireless Specifications
- Input: DC 5V2A, 9V2.22A
- Output: DC 5V/1A, 7.5V/1A, 9V/1.12A, 9V/1.66A (5W, 7.5W, 10W, 15W)
- Transmission distance：≤5mm
- Charging efficiency: 75% Max
Wireless Features
- A circle of powerful magnets works perfectly with the iPhone 12 and later, to make your phone safer.
- It can be safely connected to your car’s air vent thanks to the super durable adjustable hook with an anti-fall system.
- Perfect match with iphone 12 and later or Qi-enabled phones at up to 15W.
W Rork MagSafe Compatible Devices
*Up to 7.5W wireless charging for iOS devices.
Note
-
Only for iPhone 12 or later Series (MagSafe Case Friendly)
-
Please use case with an official MagSafe or third-party case, Not applicable to other phone cases.
-
With iOS 16, charging is put on hold when your iPhone becomes too hot or too cold to charge. When the following screenshot occurs.
To resume charging your iPhone as quickly as possible, move it to a cooler or warmer location, or if your iPhone is in use, put it to sleep. -
If a temperature warning screen appears.
To resume use of your device as quickly as possible, turn it off, move it to a cooler environment (away from direct sunlight), and allow it to cool down.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.