Xriver XW-SR-DR01 Wi-Fi Smart Door Magnetic User Manual
- June 26, 2024
- Xriver
Table of Contents
Xriver XW-SR-DR01 Wi-Fi Smart Door Magnetic
Product Information
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC Approved
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions
Installation:
- Place the device on a stable surface.
- Ensure there is a minimum distance of 20cm between the radiator of the device and your body.
- Connect the device to a power source as per the manufacturer’s guidelines.
Operation:
- Turn on the device using the designated power button.
- Follow the instructions provided in the user manual for specific operations.
- Ensure that the device does not cause harmful interference to other equipment.
- If you experience any undesired operation, contact customer support immediately.
Maintenance:
- Regularly clean the device using a soft, dry cloth.
- Avoid exposure to liquids or extreme temperatures.
- Do not attempt to modify or repair the device yourself; contact authorized service centres for assistance.
Frequently Asked Questions (FAQ)
-
Q: Can I modify the device for better performance?
A: No, any modifications not approved by the manufacturer may void your warranty and could lead to unsafe operation. -
Q: What should I do if the device emits interference?
A: Ensure that the device is properly installed at the recommended distance from your body. If interference persists, contact customer support for assistance.
Please read this manual carefully before use and keep it for future reference.
Specifications
- Input voltage: DC3V LR03
- Quiescent Current: ≤ 10uA
- Alarm Current: ≤ 160mA
- Low power under voltage: ≤2.7V
- WiFi: 802.11b/g/n
- Magnetic control distance: ≥ 15mm
- Working temperature: -10-50 C
- Working humidity: max 95%RH
How to use
- Push the mounting bracket upward and take out the bracket, then insert the battery.
- Put the battery into the battery bin and place it according to the graphics in the battery bin. After two batteries are loaded, the indicator lights are always on and then off.
- Download the TUYA Smart APP in the app store or Google Play Store, or scan the following QR code
- Register with a mobile phone number, click “My Home” interface “+” or click “Add Devices” in the middle blank. Select the security sensor and click on the door magnetic sensor.
- With the card pick-up pin in the accessory package, hold the reset key for more than 5 seconds, and the indicator flashes into the automatic network connection mode. Enter the WiFi password according to the prompt, and click to confirm.
- In the automatic network connection mode, the indicator flashes quickly, holds the reset key for 5 seconds with the card pick-up pin, the indicator flashes slowly, and enters the manual network connection mode. APP chooses compatible mode. According to the prompt, enter “WiFi password” and click confirmation, then switch to the WIFI settings interface. Connect the Smartlife_XXXX network and return to the APP to continue adding devices.
- Network connection successfully, click on the door magnetic icon to enter the interface, open the door magnetic, APP will remind you the door is open, close the magnet door magnetic APP will remind you the door is closed.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>