HOVER-1 Aviator Electric Scooter User Guide
- June 3, 2024
- HOVER-1
Table of Contents
HOVER-1 Aviator Electric Scooter User Guide
INSATLLATION
-
Attach the handle bars by placing them into the appropriate sockets and twist them in the correct direction.
-
Fully charge your Aviator for up to 5 hours before using it for the first time.
-
To fold/unfold your scooter, press the blue button on the release lever, then pull the lever. Raise or lower the steering column and lock into place.
-
Before turning on your Aviator, ride it like a normal kick scooter to get comfortable with the device before using it with the motor.
-
When comfortable riding the scooter, power it on. You must first kick off the ground and then press the throttle for the motor to start. To slow down the scooter, press the electric brake.
you must first kick off the ground for the motor to start
CONTROL AND DISPLAY
-
Display: Shows current speed, speed level, and battery life.
-
Power / Function Button: Press and hold 3 seconds to power ON.
Once the scooter display is on, press twice to turn on headlights. Press once to switch high speed / low speed mode:
P1 – Low speed mode P2- High speed mode -
Electric Brake: Reduces your speed by slowing down the motor.
-
Folding Clip: Clips to the foot brake above the back wheel.
-
Throttle: Accelerates the scooter.
LED DISPLAY
P2- High speed mode.
Documents / Resources
|
HOVER-1 Aviator Electric
Scooter
[pdf] User Guide
Aviator Electric Scooter, Aviator, Electric Scooter, Scooter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>