KFi 106215 UTV Plow System Mid Extension Installation Guide
- June 25, 2024
- KFi
Table of Contents
KFi 106215 UTV Plow System Mid Extension Installation Guide
Plow Accessory
Kit Components:
Item # Qty. Description
1| 1| Mid Push Tube Extension
2| 1| Hardware Kit (HK-393)
2.1| 8| 3/8”-16 x 1.00 Carriage Bolt (5 not used)
2.2| 2| 3/8”-16 x 1.50 Carriage Bolt (1 not used)
2.3| 10| 3/8”-16 Hex Flange Shylock Nut (6 not used)
INSTALLATION INSTRUCTIONS
Note : Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
NOTE: Mid extension (1) can be installed on either the UTV or ATV push tubes. ATV tube used in reference to this manual.
-
Unbolt hardware (A) and remove cradle (B), Lift latch assembly (C), and pivot bushing (D) shown in Figure 1.
-
Loosely install Mid Extension (1) onto push tubes using bolts (2.1) and nuts (2.3) as shown in Figure 2.
-
Reinstall pivot bushing (D), lift latch assembly (C), and cradle (B), using hardware (A) removed in step 1 onto Mid Extension (1) as shown in Figure 3
-
NOTE: The rear most bolt (A) will be replaced with a longer bolt (2.2) due to additional material thickness.
-
Tighten all hardware evenly.
-
The lift hook can be relocated if it gives a better lift angle from your machine as shown in Figure 4.
Documents / Resources
| KFi
106215 UTV Plow System Mid
Extension
[pdf] Installation Guide
106215 UTV Plow System Mid Extension, 106215, UTV Plow System Mid Extension,
Plow System Mid Extension, System Mid Extension, Mid Extension, Extension
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>