Liberty INT-USB3-CWP USB 3.2 Gen 1 Extender Over HD Baset User Manual
- June 25, 2024
- LIBERTY
Table of Contents
INT-USB3-HWP & INT-USB3-CWP
USB 3.2 Gen 1 Extender over HDBaseT
User Manual
INT-USB3-CWP USB 3.2 Gen 1 Extender Over HD Baset
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Connection
Please connect in direct interconnection method and do not cross connect.
Introduction
This USB 3.2 Extender based on HDBaseT VS6320, can extend USB signal to a
distance up to 100m/328ft via a single CAT6a cable. Host/Local device features
one USB 3.2 Type B host port, two USB 3.2 Type A client ports, one FSYSNC and
RS-232 pass-through. Client/Remote device features one USB 3.2 Type C, and two
USB 3.2 Type A client ports, one FSYSNC, and RS-232 pass-through. Bi-
directional 24V PoC is also supported.
It can be widely used for long distance USB signal transmission between USB
sources and devices like webcams, PTZ cameras, keyboards, mouse devices, USB
microphones, flash sticks, printers, scanners, touch panel displays and other
USB devices. Host & Client devices are sold separately, and are fully
compatible with box and wall plate style INT-USB3 devices
Features
☆ Extension of USB 3.2 up to 100m/328ft over CAT6a cable
☆ USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
☆ Backwards compatible with USB 2.0 and 1.1
☆ Hardware acceleration for isochronous and bulk transfer
☆ Each USB-A or USB-C port supports power output up to 5V/1500mA
☆ Plug-and-play with no drivers, downloads, or software required
☆ Support RS-232 pass-through and FSYNC GPIO pass-through (for industry camera
use)
☆ Support bi-directional 24V PoC (Power over Cable).
Package Contents
| Item | Qty | Item | Qty |
|---|---|---|---|
| USB 3.2 Extender Wall Plate (TX) | 1 | USB 3.2 Extender Wall Plate (RX) | 1 |
| 24V/2.7A Power Supply | 2 | AC Power Cord (1.5m) | 2 |
| USB-C to USB-A cable (2m) | 1 | USB-C to USB-B cable (2m) | 1 |
| USB-A to USB-A cable (2m) | 1 | USB-A to USB-B cable (2m) | 1 |
| Machine Screw (6#-32*3⁄4) | 4 | Machine Screw (KM3*4) | 4 |
| 4pin-3.5mm Phoenix Connector | 2 | 2pin-3.5mm Phoenix Connector | 1 |
| Customized Top Panel | 2 | User Manual | 1 |
Specifications
Technical
USB Protocol| USB 3.2 Gen 1
Transmission Rate| Up to 5Gbps
Transmission Distance| 100m/328ft @CAT6A (F/FTP) cable
ESD Protection| IEC 61000-4-2: ±8kV (Air-gap discharge), ±4kV (Contact
discharge)
Connections
Transmitter| Input: 1× USB HOST [USB Type B, 9-pin female] Output: 2× USB-A
DEVICE [USB Type A, 9-pin female] 1× HDBT OUT [RJ45 connector, 24V PoC]
Control: 1× RS-232 [3pin-3.5mm phoenix connector] 1× FSYNC [1pin-3.5mm phoenix
connector] 1× F/W [USB Type C, firmware update port]
Receiver| Input: 1× HDBT IN [RJ45 connector, 24V PoC] Output: 2× USB-A DEVICE
[USB Type A, 9-pin female] 1× USB-C DEVICE [USB Type C, 24-pin female]
Control: 1× RS-232 [3pin-3.5mm phoenix connector] 1× FSYNC [1pin-3.5mm phoenix
connector] 1× F/W [USB Type C, firmware update port]
Mechanical
Housing| Plastic Front Panel + Metal Enclosure
Color| White + Black
Dimensions| Transmitter / Receiver: 45mm [W] × 42mm [D] × 105mm [H]
Weight| Transmitter: 106g / Receiver: 120g
Power Supply| Input: AC 100~240V 50/60Hz Output: DC 24V/2.7A
Power Consumption| PoC Power Supply: 47W (Max)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
5.1 Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | USB-HOST | USB host port supporting USB 3.2 Gen1, connected to a PC or host. |
| 2 | LED | ▪ Red: The unit is powered on (Transmitter and Receiver are not |
connected).
▪ Green: Transmitter and Receiver are connected and linked.
▪ Off: The unit is not powered on.
3| USB-A DEVICE (1~2)| USB device ports, connected to USB devices such as U
disk, keyboard or mouse. Its output power is up to 5V/1.5A.
4| HDBT OUT| Connects to the HDBT IN port on Receiver with CAT cable.
5| RS-232| 3pin phoenix connector, connected to a PC or control system for
RS-232 command pass-through.
6| FSYNC| FSYNC port, the level pass through from Transmitter to Receiver, to
synchronize the external devices. Default level range is 0~5V.
7| DC 24V| DC 24V/2.7A power input port.
8| F/W| Firmware update port.
5.2 Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | USB-C DEVICE | USB device port supporting USB 3.2 Gen1, connected to a USB |
device. Its output power is up to 5V/1.5A.
2| LED| ▪ Red: The unit is powered on (Transmitter and Receiver are not
connected).
▪ Green: Transmitter and Receiver are connected and linked.
▪ Off: The unit is not powered on.
3| USB-A DEVICE (1~2)| USB device ports supporting USB 3.2 Gen1, connected to
USB devices. Its output power is up to 5V/1.5A.
4| HDBT IN| Connects to the HDBT OUT port on Transmitter with CAT cable.
5| RS-232| 3pin phoenix connector, connected to a PC or control system for
RS-232 command pass-through.
6| FSYNC| FSYNC port, outputting the level from Transmitter to synchronize the
external devices. Default level range is 0~5V.
7| DC 24V| DC 24V/2.7A power input port.
8| F/W| Firmware update port.
Application Example
Thank you for your purchase.
For Technical Support please call our toll free number at
800-530-8998 or email us at
supportlibav@libav.com
www.libav.com
1490 Garden of the Gods Suite F
Colorado Springs, Colorado
80907 USA
Phone: 719-260-0061
Fax: 719-260-0075
Toll-Free: 800-530-8998
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>