RODOT B066A-018-433M 433M Remote Control Instruction Manual
- June 13, 2024
- RODOT
Table of Contents
B066A-018-433M 433M Remote Control
Instruction Manual
B066A-018-433M 433M Remote Control
Pictures of objects:
Parameters:
Product Model: B066A-018-433M
Operating voltage: DC3V (one 2032 button battery)
Operating current: less than 20mA when transmitting
Operating frequency: 433±1MHz
Operating Temperature: -30℃～70℃
operation life: >10000times
Standby current: less than 1μA
Size: 61.5mm29mm12mm
Remote control response time: <5ms
Instructions for operation:
- Press the ON button, the indicator light is red, send signal, open the machine, release to stop sending.
- Press the OFF key, the indicator light is red, send signal, close the machine, release to stop sending.
- When the emission indicator light is slightly bright, it indicates that the battery voltage is low, and it is necessary to replace a new battery.
Application production scene:
- wireless mouse.
- remote control toys.
- Smart furniture., etc.
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation .
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>