Qiqin A6 Handheld Selfie Stick Head User Manual

Qiqin A6 Handheld Selfie Stick Head

Operation interface

1. Stabilizer power switch
2. Stabilizer charging port
3. Light power/adjust button
4. Aluminum alloy tube
5. Wire less Remote
6. Tripod
7. Gimbal Unlock Key
8. Lamp
9. Lamp Charging Port
10. Manually tighten screws

Take out & Put in

How to replace the battery

Open the Tripod

How to connect

1. Switch on and off press and hold the camera button for 2s to switch on and off.

2. Wireless pairing: Long press the photo button to enter the pairing state, the pairing state indicator lS I time flashing, use the hand Machine search “Gimbal” to match, matching success, green light off. Once each button is triggered, the green light flashes immediately.

3. Camera button: Long press: switch the machine;
   Click: take pictures or videos (start/stop)

4. No pairing: After starting up, for 10 minutes without operation under an unpaired connection. automatically shut down.

5. Pairing: After turning on, when the selfie device is connected to the phone, 10 minutes without operation will enter a dormancy state.

6. Power off: In the power-on and sleep state, press and hold the camera button for 2s to shut down, and the indicator light will flash and turn off.

7. Battery: When the button battery is below 2.6V ( Low electricity), flash 0.55 / flash.

Fill light function

• Operation function of fill light: Long press: on/off
• Single click: set lighting mode and brightness/off flash mode Double-click: activate flash mode
• White light: soft light, medium light, strong light
• Warm light: soft light, medium light, strong light
• Mixed light: soft, medium, strong

Backlight charging method

Typ-C interface charging, the red light is on during the charging process, and the red light is off after charging.

• Number of white lights: Warm lights: 12
• White light temperature: UOOOK Lumen:83LM
• Power: 0.6W Warm light color temperature:3000K
• Lumen: 90LM Power: 0.6W
• Mixed light color temperature:7000K
• Lumen:87LM Power: 0.6w
• Battery capacity:400mAh
• Operating voltage/output voltage. 7V
• Operating current/output current: 0.16A
• Charging voltage/input voltage: SV
• Charging current/input current:450mA

Removable fill light

Take out the backlight from the selfie stick and rotate it 1sohorizontal. Rotate 180° vertically and move it to the front of the settle stick, Align with the hollow concave and convex groove on the selfie stick and install it (Picture 1) Then move down and fo: it.

Remote Control

Note: The. ones ca mer. a must be on the same side as the po¥1er butt<:>n in order not to interfere with, the shooting.

Note: Please refer to «Bluetooth Connection) for the Bluetooth connection method.

DREAM SPACE MODE(UPSIDE-DOWN MODE)
Dreamspace Mode: When the phone is in landscape mode, levorotation 40° dextrorotation 230°levorotation 230°, dextrorotation 40° (back to the original position); When the phone is in portrait mode, dextrorotation 125°, levorotation 125° and 145°, dextrorotation 145°(back to its original position)

FUNCTION DISPLAY DIAGRAM

How to use the Gimbal

How to use the Gimbal Clamp the phone and keep the natural balance.Long press the power button for 3 seconds to turn it on, and long press 3 seconds to turn it off.
Pull the ring of the munual lock outwards, slide up to lock the gimbal as a selfie stick;(Note that the lock ring is pressed down and locked) Swipe down to unlock the gimbal as a stabilizer.

• Click: 90, and the horizontal and vertical screen will switch & to Portrait Mode
• Three strikes: counterclockwise dream space
• Double-click: Clockwise Inception

How to charge the Gimbal

When the gimbal power is too low, the three white lights flash together in the low power state, at this time to use the Type-c port charging, the charging process white lights gradually flash to full 3 white lights always on

Specification

• Main Material: ABS + Aluminum Alloy
• Mount Holder: 108.7-150.4mm
• Folded Length:180mm
• Extended Length: 790mm
• Product Size: 180×40.9×70.5mm
• Product Weight:240g
• Remote Control Battery: CR1632(replaceable)
• Gimbal Battery:400mAh
• Working voltage :3. 7V
• Charging voltage: DC5V
• Charging current:500mA (Batteries must not be exposed to sunlight, fire or similar overheating)

REMIND

• Selfie Stick compatible with Android4.4 and above& ¡OS 5.1and above(if you change the system’s “volume button function” under your phone’s camera option, be sure to change it to default, or “take picture” to make the selfie stick work)
• The clip must be held tightly when the phone is clamped.

1. Gimbal Stabilizer Mode: the best use in the 3 rods
2. Selfie Stick Mode:5 rods are recommended

Thank you for your support!

FCC Caution
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide residential accommodation. This equipment generates uses and. can radiate radio frequency energy and, if not installed and uscd in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment doc causes harmful interference to radio or television reception, which can be determined by trying to entertain yo, or more of the reloading measures:

• Re-oricnt or relocate the recciving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>