LASSIG IN4BDSGA-147 Digital Music Box Instruction Manual

June 24, 2024
LASSIG

LASSIG IN4BDSGA-147 Digital Music Box Instruction Manual

LASSIG-IN4BDSGA-147-Digital-Music-Box-Instruction-Manual-
product

Product Specifications

  • Art. No.: 1313021140/-141
  • Developed in Germany, Made in India
  • Contents: Soft toy, Bluetooth loudspeaker, USB charging cable, manual
  • Recommended Age: Soft toy from 2 months and up (Bluetooth speaker operated by adults)
  • WEEE-Reg.Nr.: DE 12994765
  • Speaker Specifications:
    • Rated Output: 0.2 W
    • Frequency Response: 400 Hz – 20 kHz
    • Distortion Factor: THD

Product Usage Instructions

Charging the Bluetooth Speaker

Use the provided USB charging cable to connect the speaker to a power source. The LED indicator will show when the speaker is charging.

Pairing the Bluetooth Speaker

To pair the speaker with a device, turn on the speaker and activate Bluetooth on your device. Search for available devices and select the speaker to pair.

Operating the Soft Toy

The soft toy can be used independently or with the Bluetooth speaker attached. Ensure that the Bluetooth speaker is securely attached for optimal sound quality.

Safety Instructions

CAUTION! This product contains small parts that may pose a choking hazard for children under 3 years old. The Bluetooth speaker should only be operated by adults.

Warning and safety instructions

CAUTION! For the safety and health of your child.

  • This product should only be used under adult supervision.
  • Examine each product before using. Dispose of the product at the first sign of any damage or flaw.
  • All packaging and fastening components are to be removed before use.
  • The loudspeaker is removable: This must be removed before the toy is washed!
  • Caution! Babies and toddlers must not be able to get a hold of the loudspeaker. After washing the soft toy, put the loudspeaker back into the toy and close the zipper completely!
  • The loudspeaker may only be charged by adults. Remove the loudspeaker from the soft toy before charging.
  • The charger used with the loudspeaker must be checked regularly for damage to cables, plugs, housing and other parts. If damaged, it must not be used until the damage has been repaired.
  • The loudspeaker has a built-in rechargeable battery and must therefore not be exposed to excessive heat – sunshine, fire or the like. The battery could explode!
  • Storage at min. -4°F max. 140°F
  • Keep the loudspeaker out of reach of children. There are small parts that could be swallowed!
  • Keep the charging cable out of reach of children. Risk of strangulation!
  • Avoid overloading sockets or extension cords; this could otherwise cause a fire or give an electric shock.

Speaker:

Rated output = PO = 0.2 W
Frequency response = 400 Hz – 20 KHZ
Distortion factor = THD<10%
Signal-to-noise (SNR) = S/N≥75db
Resolution = ≥ 55db
Loudspeaker = 23mm; 4 Ω 0.7W
Dimensions = 38.5 x 38.5 x 28.5 mm
Bluetooth®

Bluetooth Version: V 5.0
Bluetooth Frequency: 2402 – 2480 MHz
Max. Transmission Power: 5,3 dBm
Range: max. 80 m

Components

  1. On/Off switch
  2. Bluetooth indicator (blue light)
  3. Charge indicator (red light)
  4. Loudspeaker
  5. Micro USB connection

LASSIG-IN4BDSGA-147-Digital-Music-Box-Instruction-Manual-
fig-1

Description of function

Connecting loudspeaker with terminal device

  • a To switch On/Off just press and hold that button.
  • A blue light flashes when the loudspeaker is switched on.
  • b Open the Bluetooth menu on the terminal device.
  • c  Now double click on the On/Off switch of the loudspeaker, then the loudspeaker appears in the “LÄSSIG XXXX” on the terminal device.
  • d After the connection has been established, a beep will sound and the blue light will flash more slowly. The loudspeaker is now ready to play music or any other sounds.

Existing connections

  • The last device that you connect to the terminal, will always be treated as the primary one. Once the connection is established, it is automatically established the next time the device is switched on (Bluetooth on the terminal device must be switched on).
  • When a connection exists, no other device can be connected as a replacement. This means that existing connections cannot be used by a third party.

Disconnecting: After use, we recommend turning off the loudspeaker manually. The “one-button handling” allows you to turn off the loudspeaker simply by pressing the power button. You can dothis on the soft toy.
WARNING – If the connected terminal device loses connection to the loudspeaker at a distance of 2-80 m, you will hear a warning signal. As soon as the terminal device is within reach of the loudspeaker again, the warning signal stops.
Charging: Please use a suitable device to charge the USB or DC5V adapter with the Micro-USB interface. Before using for the first time, the loudspeaker must be fully charged. During charging the light will turn red. The red light goes out when the loudspeaker is fully charged.

Instructions for use

  • Before using for the first time, open the zipper and remove the loudspeaker and charging cable. Replace the charged loudspeaker in the body of the toy and close the zipper completely.
  • Avoid dropping or knocking the toy as this can damage the electronic circuits.
  • Ensure that the side with the On/Off switch faces outwards towards the zippe when you are inserting the zipper.
  • Protect from moisture and do not allow it to get wet
  • Wireless systems can cause interference to cordless phones, microwave ovens or other wireless devices operating in the 2.4GHz range. Keep the system at least 3 meters away from the equipment when installing or using it.
  • All electrical connections and connecting cables must meet the relevant regulations and comply with the operating instructions.

LASSIG-IN4BDSGA-147-Digital-Music-Box-Instruction-Manual-
fig-2

Guidelines for cleaning, care, and maintenance

  • The fabric cover of the product must be cleaned regularly (see washing instructions on the product label).
  • Clean the loudspeaker with a dry cloth if necessary.
  • The Bluetooth loudspeaker is maintenance-free and should therefore not be opened. Opening the device will void the warranty. Only clean the outside of the device.

Correct disposal

Damage to the environment due to incorrect disposal of the speaker: Ensure the correct disposal of the product at the end of its life and do not throw it in the household waste.

Instruction manual

LÄSSIG’s Digital Musical
Pull Toy with Bluetooth loudspeaker

Art. No. 1313021140/-141
Booth: 10/2020

DEVELOPED IN GERMANY
MADE IN INDIA

Contents
Soft toy
Bluetooth loudspeaker
USB charging cable manual
Recommended age
Soft toy from 2 months and up.
(Bluetooth speaker only to be operated by adults)
Please keep this product information. When passing this article on to a third person, this information should be handed over.
Have fun with your digital musical pull toy from LÄSSIG.
Your LÄSSIG team.

LASSIG-IN4BDSGA-147-Digital-Music-Box-Instruction-Manual-
fig-3

Trademark Attribution Footnote

Whenever the Bluetooth Trademarks are used in a particular piece, they must be attributed with an appropriate trademark footnote. The recommended attribution footnote is as follows:
“The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by [licensee name] is under license. Other trademarks and trade names are those of their respective owners.”
The footnote may be presented in small type but must be large enough to be legible. This footnote generally appears at the end of a document or on the back of a package, but it may appear at the bottom of a press release a web page, or the inside cover of technical documentation accompanying the product. The footnote may be translated into any language provided, however, the Bluetooth word mark is in English or one of the approved translations found on page 4. The company name, Bluetooth SIG, Inc., must always be displayed in English. If a footnote cannot be applied on product packaging or labels due to space limitations, the footnote must be printed on the product’s associated printed materials.

Frequently Asked Questions (FAQ)

Q: Can the soft toy be washed?

A: The soft toy is not washable. Use a damp cloth to spot clean if needed.

Q: How do I know when the speaker is fully charged?

A: The LED indicator on the speaker will turn solid green when it is fully charged.

Q: Can I use any USB cable to charge the speaker?

A: It is recommended to use the provided USB charging cable to ensure compatibility and safe charging of the speaker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals