Ortis LF40-HVCO3 Automatic Vacuum Switch User Manual

Ortis LF40-HVCO3 Automatic Vacuum Switch

Launch Date: June 16, 2021
Price: $99.99

Introduction

The Ortis LF40-HVCO3 Automatic Vacuum Switch is a cutting-edge tool that will make your workspace cleaner and more productive. With this high-tech switch, your shop vacuum and power tool will both turn on automatically, so you don’t have to do it yourself. The vacuum keeps running for a few seconds after the tool is turned off thanks to its clever delay function. This makes sure that all the dust and debris is picked up. It is easy to set up because it is plug- and-play and doesn’t need any extra wires. One important feature is that it uses less than 1 watt of power when it’s not in use. This makes it an environmentally friendly choice. The switch works with a lot of different power tools and vacuums, which makes it an important part of any workshop. With two tool ports and three vacuum run modes, it gives you more options and makes things easier. Safety is the most important thing, so features like actuation limits and shutoff delay times that can be set can keep the workplace clean and stop circuit overloads. The Ortis LF40-HVCO3 is the best way to keep your desk clean, safe, and efficient.

Specifications

• Model: LF40-HVCO3
• Voltage: 120V AC
• Max Current: 15A
• Cord Length: 6 feet
• Power Consumption: < 1 watt in standby mode
• Compatibility: Works with most power tools including saws, sanders, and drills
• Operating Temperature: -4°F to 140°F (-20°C to 60°C)
• Dimensions: 6.5 x 3.5 x 1.5 inches
• Weight: 1.2 pounds
• Operation Mode: ON-OFF
• Current Rating: 15 Amps
• Operating Voltage: 120 Volts
• Connector Type: Plug-In
• Brand: Ortis
• Item Dimensions (L x W x H): 2 x 1 x 1 inches
• Mounting Type: Wall Mount
• Actuator Type: Rotary
• International Protection Rating: IP54

Package Includes

• 1x Automatic vacuum switch
• 3x Mounting screws
• 1x User manual
• 1x Strong nano-markless hook

Features

• Delay Function
  The built-in delay function ensures that the vacuum continues to run for a few seconds after the power tool is turned off. This feature helps in extracting all the remaining dust and debris, preventing short cycling, and enhancing the overall cleaning process.

• Easy Installation
  The device offers a simple plug-and-play setup, eliminating the need for additional wiring or complicated installations. Just plug your power tool and vacuum into the designated outlets on the switch, and you are ready to go .

• Energy Efficient
  Consuming less than 1 watt in standby mode, the Ortis LF40-HVCO3 is designed to be energy-efficient, reducing power consumption when the devices are not in use, which helps in saving electricity and costs.

• Universal Compatibility
  The switch is compatible with a wide range of power tools and shop vacuums, making it a versatile addition to any workshop. It works seamlessly with tools like saws, sanders, drills, and more, ensuring broad usability.

• NEW GENERATION
  This advanced version includes two tool outlets, eliminating the need for an extra extension socket and avoiding messy cords. It also features three vacuum run modes (Auto, Off, and On) that can be easily switched using clearly labeled LED indicators, providing greater flexibility and convenience.

• Configurable Actuation Threshold
  You can set the actuation threshold at either 30W or 60W, allowing you to adjust the sensitivity of the switch according to your specific needs. This customization helps in preventing the vacuum from running unnecessarily long or failing to turn off when the tool stops.

• Automatic Operation
  The Ortis LF40-HVCO3 Automatic Vacuum Switch intelligently turns your vacuum on and off in sync with your power tool. This automation enhances convenience and efficiency, allowing you to focus on your tasks without manual intervention for operating the vacuum.

• Configurable Shutoff Delay Time
  The switch offers an optional shutoff delay time of 3, 7, or 10 seconds, which ensures that the vacuum continues to clear airborne debris even after the tool has stopped. This reduces noise and enhances work efficiency by maintaining a cleaner work environment.

• Turn On Delay & Safety
  To prevent circuit overload or tripping, the switch includes an automatic 1-second delay for turning on the vacuum when the power tool starts. It also features a UL-certified 14AWG power cord, capable of handling large currents (more than 30A) with a thick copper core and flame-retardant PC+ABS V0 grade material, ensuring less heat generation and a longer service life.

• Compatibility
  The switch supports a wide range of cutting tools, from small handheld devices to large shop saws such as miter saws, table saws, power sanders, routers, jointers, and planers. It is suitable for devices with a maximum motor rating of 120V/15A, 50/60Hz, 1875W.

• Efficiency and Safety
  The auto turn-on feature for the vacuum ensures efficient dust collection, while the auto delay shutoff minimizes noise and enhances workspace safety. The switch allows you to focus on your work without distractions from operating dangerous power tools, promoting better respiratory health by reducing airborne toxins and noise.

• Two Power Tool Outlets
  With two power tool outlets, you can plug in more than one tool, eliminating the need for additional extension sockets and keeping your workspace organized and efficient.

• Three Vacuum Run Modes
  The switch offers three modes of operation: Auto, Off, and On. These modes allow you to choose between automated and manual control of your vacuum and accessories, providing flexibility depending on your needs. In ON/OFF mode, the vacuum remains turned on or off all the time, independent of the power tool.

Why the Ortis Automatic Vacuum Switch is Perfect for You

• Two Power Tool Outlets: Accommodates multiple tools, reducing the need for extra extension sockets and avoiding messy cords.
• Three Vacuum Run Modes: Offers flexibility between automated and manual operation.
• Configurable Shutoff Delay Time: Ensures thorough dust extraction with customizable delay times.
• Configurable Actuation Threshold: Prevents unnecessary vacuum operation, enhancing efficiency and reducing wear.

Dimension

Usage

Easy 3-Step Process to Use

Plug and Power Up

• Plug the Ortis LF40-HVCO3 Automatic Vacuum Switch into a wall socket.
• Plug your vacuum into the “Vacuum” outlet on the switch.
• Switch on your vacuum.

Connect Your Tool

• Plug your power tool into the “Tool” outlet on the switch.

Operate as Normal

• Use your power tool as you normally would. The vacuum will automatically turn on and off in sync with your power tool.

Care and Maintenance

• Regular Inspection: Check the device regularly for any signs of wear or damage.
• Cleanliness: Keep the switch and its surroundings clean to avoid dust accumulation.
• Cord Management: Ensure the cords are not tangled or pinched to prevent damage.
• Storage: Store in a cool, dry place when not in use.

Troubleshooting

both the power tool and vacuum are correctly plugged into the switch
Vacuum delayed start/stop| Normal delay feature| Check for any obstructions or debris in the switch if the delay is unusually long
Intermittent operation| Damaged cords or poor connection| Inspect cords for damage and ensure all connections are secure
Switch not powering on| No power supply| Verify the wall socket has power and the switch is properly connected
Vacuum runs continuously| Actuation threshold not set properly| Adjust the actuation threshold to 30W or 60W according to your tool’s power requirement
Vacuum turns off too soon| Shutoff delay time set too short| Increase the shutoff delay time to 3s, 7s, or 10s as needed
Circuit overload| Excessive current draw| Ensure the power tool and vacuum do not exceed the maximum current rating of 15A
Switch gets hot| Overloading or continuous use| Check the load and ensure it is within the specified limits; allow the switch to cool down if used continuously for long periods

Pros and Cons

Pros :

• Convenient automatic operation.
• Remote control for easy access.
• Adjustable actuation for customization.
• Overload protection for safety.

Cons :

• Limited compatibility with certain tools.
• Requires proper grounding for safe operation.

Customer Reviews

• Rating : 4.5/5 stars
• Reviews :
  • “This switch has been a game-changer for my woodworking shop. It’s easy to use and keeps my workspace clean.” – John
  • “The remote control feature is super convenient. I can turn on the vacuum from anywhere in my shop.” – Sarah

Contact Information

• Phone : 1-800-ORTIS-1
• Email : support@ortis.com
• Website : ortis.com

Warranty

• Duration : 2 years
• Coverage : Parts and labor
• Registration : Register your product within 30 days of purchase to activate the warranty.

For more information and to purchase the Ortis LF40-HVCO3 Automatic Vacuum Switch, visit the Ortis website or check out the links below:

• Ortis Website : https://ortis.com/products/automatic-vacuum-switch-lf40-hvco3

FAQs

What is the primary function of the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch is designed to automatically turn on and off the vacuum cleaner when you start and stop your power tools, ensuring a clean and dust-free workspace.

What are the key features of the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch features two power tool outlets, an automatic delay feature, and three vacuum operation modes (auto, off, and on). It also supports a wide range of cutting tools from rotary handheld devices to large shop saws.

How does the automatic delay feature work in the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The automatic delay feature in the Ortis LF40-HVCO3 Automatic Vacuum Switch delays vacuum turn-off by 7 seconds after the tool is turned off, ensuring that the vacuum continues to clear the air while the motor spins down.

What is the maximum motor rating for the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch supports a maximum motor rating of 120V/15A 50/60Hz, 1875W.

What types of tools can the Ortis LF40-HVCO3 Automatic Vacuum Switch support?

The Ortis LF40-HVCO3 Automatic Vacuum Switch supports a variety of cutting tools, including Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers, and more.

What are the benefits of using the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch helps to save time and effort by automatically turning on and off the vacuum, keeps your workspace cleaner, and enhances your productivity.

How does the Ortis LF40-HVCO3 Automatic Vacuum Switch prevent circuit overload?

The Ortis LF40-HVCO3 Automatic Vacuum Switch prevents circuit overload by delaying the vacuum turn-on by 1 second when the load on the power port exceeds 30 watts.

What is the weight and dimensions of the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch weighs 12 ounces and measures 0.39 x 0.39 x 0.39 inches.

What is the power source of the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch is powered by AC.

What is the current rating of the Ortis LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch has a current rating of 30 Amps and 15 Amps.

What is the warranty offered by Ortis for the LF40-HVCO3 Automatic Vacuum Switch?

The Ortis LF40-HVCO3 Automatic Vacuum Switch comes with a 1-year warranty against defects in materials and workmanship.

How do I install the Ortis LF40-HVCO3 Automatic Vacuum Switch?

To install the Ortis LF40-HVCO3, plug it into a wall socket, connect your vacuum to the Vacuum outlet, and plug your power tool into the Tool outlet. Turn on your vacuum and operate your tool as usual.

How does the Ortis LF40-HVCO3 Automatic Vacuum Switch work?

The Ortis LF40-HVCO3 detects the current draw from your power tool and activates the vacuum accordingly. It includes a delay function to ensure thorough dust extraction even after the tool is turned off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>