TMI Chevy Nova 1962-67 Door Panel Installation Guide
- June 24, 2024
- TMI
Table of Contents
Chevy Nova 1962-67 Door Panel Installation Instructions
Chevy Nova 1962-67 Door Panel
Included Parts:
Drill Template
Door Panels
Mounting Hardware
Tools Required for Installation:
Masking Tape
Marker
Drill with Phillips Head
Self Tapping Screws (2pcs)
Step 1. Remove the factory door panels, including all the hardware.
NOTE: Some existing hardware will be installed into the new door panel.
Step 2. Cut out the provided template following the scissors as well as all the labled holes/openings.
Step 3. Align the template to the factory window crank and holes.
Step 4. Using the template, mark any new holes that will have to be
drilled out.
Step 5. Drill out the marked holes using the sizes indicated on the drill template.
Step 6. Mount the door panel cup kit bracket to the door using the screws
provided.
NOTE: Bending the bracket to properly fit the door panel may be needed.
Tools Required for Installation:
Masking Tape
Marker
Drill with Phillips Head
Step 7. Mount the door panel to the door making sure to align the clips to the holes.
Step 8. Once mounted, install the door panel cup to the bracket using the screws provided in the kit.
Step 9. Once screwed into place, unpeel and stick the felt screw cover within the door panel cup.
Step 10. Cut out the material for the window/door crank.
Step 11. Install the window/door crank.
QP 09-376 Rev.01
99-0105-000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>