Feiffer Consult Classic 6-8m Loss Control Pan Grain Pan Instruction Manual
- June 22, 2024
- Feiffer Consult
Table of Contents
Feiffer Consult Classic 6-8m Loss Control Pan Grain Pan
Homepage : www.feiffer-consult.com
E-Mail: beratung@feiffer-consult.de
Tel : 0361/21266866
IBAN : DE52 3006 0601 0039 4717 23
BIC : DAAE DEDD XXX
Umsatzsteuer – ID : DE334577283
Operating Instructions
Loss control pan “Grain Pan” (for 6-8 m header widths, can also be used with smaller hw)
Procedure of the loss determination
-
Put the loss control pan on the ground in the middle in front of the header. Keep a safe distance from the combine harvester!
-
The driver sees where the control pan is, lifts the header for a short time and gets it passed between the front wheels.
-
Collect the threshing losses with the loss pan.
-
Shake the straw above the pan and put it aside.
-
Push the received grains into the boxes provided – covering the ground, in a single layer!
- with setting the swath use the left boxes
- with straw cutting/chaff distribution use the right boxes
-
Each of the three full boxes corresponds to 0,5 % of loss.
In addition:- One full box = 0,5 % of loss (low amount of loss)
- Two full boxes = 1,0 % of loss (optimal amount of loss)
- Three full boxes = 1,5 % of loss (higher amount of loss)
-
The loss pan is designed to determine losses both during swath laying and when using a straw chopper each with the chaff spreader switched on.
-
Use our Automatic release “Grain pan” for loss measurement without danger and dust. You can find more information about this in our online shop.
If you have any other questions, please do not hesitate to contact our customer by email to be ratung@feiffer-consult.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>