SMXC046 Coffer Tower CPU User Manual

SMXC046 Coffer
User Manual

SMXC046 Coffer Tower CPU

Before using the product, read the user manual carefully. Save it for future reference.
1.1 Safety Information.

• Avoid direct contact of the device with water and other liquids.
• Do not use the appliance in an environment with high humidity.
• Keep the device out of the reach of children. They may swallow some elements.
• Use the appliance only in accordance with the user manual.
• If the device stops working properly – contact us.

1.2 Contents.

• Case
• Manual
• Mounting kit

1.3 Included accessories.

Cards PCIE
| | (3)Screw #6-32 6.5mm x2| ounting pin for motherboard
| | (4)Screw #6-32 5mm x4|  HDDs 3.5”

1.4 How to Use the Product
1.5 I/O Panel.
REMARK! Before connecting the wires, please refer to the motherboard manual.

1.6 Removing the panels.
Glass panel: Using toolless screws (A), unscrew the glass panel, then disassemble it with both hands.
Side Panel: Using the toolless screws (A), unscrew the panel, then slide the panel.
Front panel: Grasp the panel from underneath (B), then pull it towards you with a firm movement.

1.7 Assembling the Power Supply.
Using the screws (2), screw the power supply to the case. Make sure the power supply is facing the fan down the case.

1.8 Mounting the motherboard.
Remark! Before assembly, read the motherboard manual.
The case supports motherboard standards: ITX, mATX and ATX.
To mount the motherboard, use the screws (1). Match the mounting pins (3) to the size of your motherboard.

1.9 Installation of fans and connection.
Two 140 mm fans are factory-installed on the front of the case. You can swap them out for three 120mm fans.
One 120 mm fan is mounted on the back of the case.
You can install two 140mm/120mm fans on the top of the case.
Remark! There is no fan speed and backlight controller installed in the case. The fans are connected to each other in parallel. Connect the power supply to the fan to SYS_FAN.

1.10 Mounting SSDs.
Remove the side panel of the case. Then unscrew the disc tray using a screwdriver. To mount the drives, use the screws marked (1). You can install a maximum of two disks.

1.11 Mounting HDDs.
The drive frame is screwed to the bottom of the case. Using a screwdriver, unscrew the drive frame. Then, use the screws (4) to secure the HDD. You can install two HDDs in a maximum frame.

1.12 Assembling the graphics card.
Disassemble the glass panel. Unscrew the PCIE expansion card covers.
Remark! Customize the brackets for your graphics card. Depending on the model, the card can occupy from one to three PCIE slots.

1.13 All in One Water Cooling Installation Recommended.

1.14 Specification.

Rear lx 120 mm
Water Cooling Mounting Options| Top: 240 mm Front: 240 mm, 280 mm, 360 mm
Number of Fans Installed| 4
Buttons| Power Reset
Connector Leads| 2x USB 3.0 socket lx USB 2.0 socket Audio jack
Colour| Black
Height| 446 mm
Width| 216 mm
Depth| 335 mm
Scales| 4.5 kg

1.15 Warranty & Support. 

Your product comes with a 24-month manufacturer’s warranty. For more information, visit the www.silvermonkey.com/support website.
If you would like support on how to use the product, please contact us at kontakt@silvermonkey.com.

Producer:
Silver Monkey sp. z o.o.
Twarda 18
00-105 Warsaw
Poland

v. 1/21.05.2024
Environmental & Compliance

As the manufacturer of this equipment, we declare that it meets the requirements of the relevant European Union directives. If you need a copy of the declaration of conformity – please contact us.
Do not dispose of this equipment with other waste. The materials from which the equipment is made can have a bad impact on the environment and human health if the product is disposed of improperly. Hand over used equipment to an appropriate e-waste collection point.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>