SHIMANO 0MX2 Dual Control Lever Di2 Hydraulic Disc Brake Type Instruction Manual

**SHIMANO 0MX2 Dual Control Lever Di2 Hydraulic Disc Brake Type Instruction Manual

**

Important Product Information

• SHIMANO will be going green with digital user’s manuals. Join us in our effort to protect the environment by going paperless.
• Scan the above QR code to view the user’s manual. For safety, be sure to read the user’s manual thoroughly before use, follow it for correct use, and store it so that it can be referenced at any time.
• Alternatively, you may visit our website : https://si.shimano.com to download the user’s manual.
• For consumers who do not have easy access to the internet, please contact your place of purchase or any of the SHIMANO offices listed above to obtain a hardcopy of the user’s manual.
• QR Code is a registered trademark of DENSO WAVE INCORPORATED

Important safety information

WARNING

• Because each bicycle may handle slightly differently depending on the model, be sure to learn the proper braking technique (including brake lever pressure and bicycle control characteristics) and operation of your bicycle. Improper use of your bicycle’s brake system may result in a loss of control, which could lead to serious injury due to a fall or collision.

• Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may suddenly fall and be seriously injured.

• Use only the battery specified. Using an incorrect battery may cause the battery to burst or leak fluid, resulting in fire, injury, or defacement in the surrounding area.

• Do not use the battery outside its operating temperature ranges. If a battery is used or stored in temperatures which are outside these ranges, fire, injury or problems with operation may occur.

• Do not throw or subject this product to strong shocks. If this is not observed, bursting, overheating or problems with operation may occur.

• Do not let grease adhere to the metal terminals. A conduction failure may result.

• Do not use the battery if leakages, discoloration, deformation or any other abnormalities occur. If this is not observed, bursting, overheating or problems with operation may occur.

• If any leaked fluid gets on your skin or clothes, wash it off immediately with clean water. The leaked fluid may damage your skin.

• Coin batteries are hazardous and must be kept away from children.
  Never put batteries in mouth or in any part of the body. Severe or fatal injuries can occur within 2 hours if swallowed or placed inside the body. If this occurs or is suspected, seek medical attention immediately.

• Do not use this equipment in locations where children are likely to be present. If the included coin batteries are swallowed by mistake, seek medical attention immediately.

• Dispose of the coin batteries according to proper country and/or state disposal regulations.
  Disposal of this product into fire or a hot oven, or mechanically crushing or cutting it, can result in an explosion of the coin batteries.

• When operating the shift switch, be careful not to allow your fingers to be caught in the derailleur. The powerful motor which drives the electronic gear shifting derailleur will operate without stopping until the shifting position is reached.

• This hydraulic brake system has different braking characteristics from those of the rim brake type, demonstrating relatively high braking force at the beginning of braking (higher than the rim brake type); familiarize yourself sufficiently with the braking characteristics before using it. If you ride the bicycle without becoming sufficiently familiar with the braking characteristics, braking may cause you to fall off the bicycle, potentially causing serious injury or a fatal accident.

• Riders must become accustomed to the higher performance of this brake before riding the bicycle. Using larger diameter disc brake rotors provides a higher braking force than smaller diameter disc brake rotors. If you ride the bicycle without becoming sufficiently familiar with the braking characteristics, braking may cause you to fall off the bicycle, potentially causing serious injury or a fatal accident.

• Keep your fingers away from rotating disc brake rotors. The disc brake rotor is sharp enough to inflict severe injury to your fingers if caught within the openings of moving rotor.

• Do not touch the calipers or disc brake rotor while riding or immediately after dismounting from the bicycle. The calipers and disc brake rotor will become hot when the brakes are operated, so you may get burned if you touch them.

• Do not allow any oil or grease to get onto the disc brake rotor and brake pads. Riding the bicycle with oil or grease on the brake shoes may prevent the brakes from operating and result in serious injury due to a fall or collision.

• Check the thickness of the brake pads and do not use them if they have a thickness of 0.5 mm or less. Doing so may prevent the brakes from operating and result in serious injury.

• Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor may break, and result in serious injury due to a fall.

• Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also do not use it if the aluminum surface becomes visible. The disc brake rotor may break, and result in serious injury due to a fall.

• Do not continuously apply the brakes. Doing so may cause a sudden increase in the brake lever stroke, preventing the brakes from operating and resulting in serious injury.

• Do not use the brakes with fluid leaking. Doing so may prevent the brakes from operating and result in serious injury due to a fall or collision.

• Do not apply the front brake too strongly. If you do so, the front wheel may lock and the bicycle may fall forward, and serious injury may result.

• Because the required braking distance will be longer during wet weather, reduce your speed and apply the brakes early and gently. You may fall or collide and be seriously injured.

• A wet road surface may cause tires to lose traction; therefore, to avoid this, reduce your speed and apply the brakes early and gently. If the tires lose traction, you may fall and be seriously injured.

• Do not leave this product in an extremely high temperature surrounding environment such as in a closed vehicle on a hot day, or near a heater. Doing so may result in an explosion of internal battery or the leakage of flammable liquid or gas from it.

• Do not subject this product to extremely low air pressure. Doing so may result in an explosion of internal battery or the leakage of flammable liquid or gas from it. Transporting this product by air is not a problem.

• Observe all federal, state and local environmental regulations when disposing of this product, because it has an internal battery in addition to its coin battery. Disposal of this product into fire or a hot oven, or mechanically crushing or cutting of it, can result in an explosion of the internal battery.

CAUTION

• Cautions on SHIMANO genuine mineral oil
  • In the event of eye contact, flush with fresh water and seek medical assistance immediately. Contact with eyes may result in irritation.
  • In the event of skin contact, wash well with soapy water. Contact with skin may cause a rash and discomfort.
  • Cover nose and mouth with a respirator type mask and use in a well ventilated area. Inhalation of mineral oil mist or vapors may cause nausea.
  • If mineral oil mist or vapor is inhaled, go immediately to an area with fresh air. Cover up with a blanket. Stay warm and stable and seek professional medical advice. „
• Bed-in period
  • Disc brakes have a bed-in period, and the braking force will gradually increase as the bed-in period progresses. Accidents or falls may occur due to losing control of the bicycle, possibly
    resulting in serious injury. The same thing will happen when the brake pads or disc brake rotor are replaced.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found, consult your place of purchase or a distributor.

• Are there any signs of brake oil leakage?
• Do the front and rear brakes work correctly?
• Do the pads have a thickness of 0.5 mm or more?
• Is the disc brake rotor cracked or deformed?
• Does gear shifting occur when the shift switches are operated?
• Are the levers securely installed to the handlebar?
• Do any abnormal noises occur during operation?
• Is there sufficient charge remaining in the battery?

Specifications

ADISON (A DIVISION OF H.YOUNG (OPERATIONS) LTD)
Roebuck Way, Knowlhill, Milton Keynes,
Buckinghamshire, MK5 8HL, United Kingdom

IPI-0MX0A-050-00

https://si.shimano.com/um/0MX0A
© Aug. 2023 by SHIMANO INC. ITP

References

• si.shimano.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>