LUMINTOP D2 Compact 1000 Lumen USB-C Rechargeable LED Torch User Manual
- June 21, 2024
- LUMINTOP
Table of Contents
D2 Compact 1000 Lumen USB-C Rechargeable LED Torch
User Manual
Specifications
ANSI/ NEMA FL1| Eco| Low| Med| High| Turbo|
Strobe/SOS
---|---|---|---|---|---|---
Output| Osram| 15LM| 130LM| 350LM| 550LM| 1000LM| 550LM
Nichia| 10 LM| 100 LM| 240 LM| 400 LM| 700 LM| 400 LM
Runtime| 6D| 20h| 6h.30mIn| 5h| 5min+2h 40min| /
Distance (Max)| Osram: 475m/ Nichia:337m
Intensity (Max)| Osram: 56500cd/ Nichia:28400cd
Impact Resistant| 1.5m
Notice: The above approximate data are lab-tested by using a 5000mAh 21700 Li-ion battery, it may vary due to the difference of environment and batteries. The runtime on turbo is accumulated due to over-heat protection.
Features
Emitter: Osram LED or Nichia LED
Output(Max) : ~1000 Im (Osram)
Intensity (Max): ~56500cd (Osram)
Beam distance (Max): 475m (Osram)
Optic: Aluminum, smooth
Lens: Dual sides AR coat anti-reflecting glass
Modes: 5 modes plus Strobe and SOS
Battery: 1 X 21700 Li-ion (excluded)
Body: Aluminum with hard-coat anodizing
Switch: Electronic side switch
Ingress rating: Equivalent to IPX8
Weight: Approximately ~85g without cells
Size: 3725.4115mm
Operation Instruction
- ON/OFF: One click of the switch.
- Output change: From ON, press and hold the switch to ramp the output from Low-Med-High, release the button to select the output (with memory).
- Turbo: 2 quick clicks on the switch.
- Strobe/SOS: 3 clicks the switch to go to Strobe, and another 3 clicks will go to SOS.
- Eco: Press and hold the switch from OFF.
- Lock-out/ Unlock: 4 clicks the switch from OFF. Momentary Low is available when pressing the switch. Another 4 clicks or loosen the threads and cut off the electricity to unlock the flashlight.
- Switch back-lit light ON/ OFF: 5 clicks the switch from OFF.
USB Type-C Charging
The flashlight can be charged with the built-in USB Type-C charging port, the
maximum charging current is 2A, 5V/2A adapter is recommended.
When it’s in the charging process, the indicator is blinking and constant on
when it’s fully charged.
Low Voltage Warning
The backup light on the button will blink on the green when the battery voltage is 3V; the output will downshift automatically to Low when it’s 2.8V.
About the Battery
- Use only reputable 21700 cells of known origin. Quality high drain cells from Samsung, Panasonic / Sanyo, Sony, or LG are recommended.
- Remove or recharge the cell when the low voltage indication is given by the Lamp.
- The extraordinary energy density that the cells offer also means that hazardous conditions are created when a cell is short-circuited or damaged. Always treat cells with respect and properly dispose of damaged cells.
Warnings
- Keep away from children.
- Do not point the light directly at a person, animal, moving vehicles or flamable materials.
- Do not throw into fire in case of explosion.
- To charge the battery three months a time if long time no uses.
Warranty
- 30 days of purchase: Free repair or replacement with manufacturing defects.
- 5 years of purchase: Lumintop will repair the products free of charge within 5 years of purchase (products with built-in battery 2 years, battery 1 year) if problems develop with normal use.
- Lifetime warranty: If repair is required after guaranty period, we’ll charge for parts accordingly.
- This warranty does not cover normal wear and tear, improper maintenance, abuse, force majeure damage, or defaults by human factors.
| |
---|---|---
https://lumintop.com/| https://www.facebook.com/lumintop|
https://twitter.com/lumintop
Made in China
LUMINTOP TECHNOLOGY CO., LTD
Address: 11th Floor, Block B , Tianhengda Industrial Park,
No.2 Chengxin Road, Longgang District, Shenzhen, China
Web: www.lumintop.com
Tel.: +86-755-88838666
E-mail: service@lumintop.com