LUMINTOP GT NANO Titanium Flashlight User Manual
- June 25, 2024
- LUMINTOP
Table of Contents
LUMINTOP GT NANO Titanium Flashlight User Manual
Specifications
Notice: The above approximate data are lab-tested and may vary due to the difference between environment and batteries. The runtime on High and turbo are accumulated due to over-heat protection.
Operation Instruction
General Modes: Low-Med-High (with mode memory);
Hidden Modes: Moonlight, Turbo
- ON/OFF: One click the switch for ON, press and hold for 1 second for OFF.
- Output change: One click the switch from ON.
- Moonlight: Press and hold the switch for 1 second from OFF, another click will enter the general mode.
- Turbo: Two quick clicks from ON, another click will enter the general mode.
- Two quick clicks from OFF will enter High mode, another click will enter the general mode.
- Switch back-lit light ON/ OFF: 7 clicks the switch from OFF.
Low-voltage Protection
The flashlight will automatically downshift the outputs when the battery voltage is dropped to prevent battery damage from over-discharge.
- Under 3.2V, a max of 60% of the mode performance is allowed except Low
- Under 3.1 V, the flashlight will blink as a reminder, max 20% of the mode performance
- 3.0V, Moonlight mode only
- 2.9V, the flashlight will shut off automatically
Over-heat Protection
The flashlight will accumulate lots of heat when running on High or Turbo for a long time. To ensure a comfortable user experience, the flashlight will downshift the outputs automatically when the temperature reaches 45 C or above, and it will recall the previous output when the temperature goes down to 40 C
About the Battery
-
A 10280 is included in the package.
-
When using the 10440 Li-ion battery, a long tube is required.
The long tube and battery are sold separately. -
It’ s suggested to charge the 10280 Li-ion battery via the charger the package comes with.
-
A battery with a good reputation is recommended when replacing a new one, and make sure the anode side of the battery always goes towards the flashlight head side.
Charging instructions:
- Remove the light head.
- Remove the cap from the charging unit.
- Connect the tube (battery included) with the charging unit.
- Insert the charging cable and connect it to the power source.
- The charging indicator is red undercharging and turns green when the battery is fully charged.
Warnings
- Keep away from children.
- Do not shine point directly at a person, animal, moving vehicles or flamable materials.
- Do not throw into fire in case of explosion.
- To charge the battery three months a time if long time no uses.
Warranty
- 30 days of purchase: Free repair or replacement with manufacturing defects.
- 5 years of purchase: Lumintop will repair the products free of charge within 5 years of purchase (products with built-in battery 2 years, battery 1 year) if problems develop with normal use.
- Lifetime warranty: If repair is required after guaranty period, will charge for parts accordingly.
- This warranty does not cover normal wear and tear, improper maintenance, abuse, force majeure damage, or defaults by human factors.
Made in China
LUMINTOP TECHNOLOGY CO., LTD
Address:l Ith Floor, Block B , Tianhengda Industrial Park,
No.2 Chengxin Road, Longgang District, Shenzhen, China
Web: www.lumintop.com
Tel: +86-755-88838666
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>