kugan com KAVACRBR40A Robot Vacuum Cleaner and Mop User Guide

June 22, 2024
kugan com

kugan com KAVACRBR40A Robot Vacuum Cleaner and Mop

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
product

Product Usage Instructions

Ensure to read all instructions and warnings in this user guide before first use. Retain this user guide for future reference.

Quick Operation: Charge the machine for more than 8 hours for the first- time use. Press the power button to commence cleaning and pause by pressing the button again.

Remote Control Function: Use the remote control for functions like Standby/Wake, Start/Stop, directional buttons, and different cleaning modes (Auto/Spot/Edge).

  • Clean surrounding debris after use.
  • Change side brushes periodically for optimal performance.
  • Use the machine carefully for effective cleaning.
  • Check the area for loose wires or cables.
  • Remove fragile or dangerous items from the cleaning area.
  • Arrange furniture neatly and consider placing barriers at drop edges.
  • Avoid using a vacuum to clean liquids.
  • Dust Bin: Empty the dirt into the bin, clean the filter with water, and ensure it is fully dry before placing it back in the vacuum. Clean the dust bin frequently.
  • Mop: Clean and dry the mop after every use.
  • Suction Inlet & Side Brushes: Regularly clean to maintain optimal performance.

FAQ

  • Q: How often should I clean the filter?
  • A: It is recommended to clean the filter with water after every few uses and ensure it is fully dry before reinserting it into the vacuum.
  • Q: Can I use the vacuum to clean liquids?
  • A: No, it is advised not to use the vacuum to clean liquids to prevent damage to the appliance.

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide before first use. Retain this user guide for future reference.

  • The vacuum can be used by adults and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the vacuum in a safe way and understand the hazards involved.
  • Do not allow children to use this appliance as a toy.
  • Children must be supervised to ensure they do not play with the appliance.
  • Keep children and pets away from the vacuum.
  • This vacuum can only be used for indoor domestic floor cleaning. Do not use outdoors, on objects, or in commercial/industrial environments.
  • Do not use the vacuum in the environments where it may fall (for example, on top of furniture or on balconies).
  • Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base and lift items such as curtains and tablecloths off the floor.
  • If there is a drop-off in the cleaning area due to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling.
  • Make sure the physical barrier is not a trip hazard.
  • Only use this appliance as described in this user guide. Only use attachments recommended or sold by Kogan.com.
  • Please make sure your power supply source voltage matches the power voltage marked on the adapter.
  • For indoor household use only. Do not use this Appliance in outdoor, commercial or industrial environments.
  • Use only the original rechargeable battery provided with the appliance. Non-rechargeable batteries are prohibited.
  • Do not use it without a dustbin in place.
  • Do not operate the appliance in an area where there are lit candles or fragile objects.
  • The operating environment of this vacuum is between -5°C –40°C.
  • Do not operate the appliance in a room where an infant or child is sleeping.
  • Do not use the appliance on wet surfaces or surfaces with standing water.
  • Do not allow the appliance to pick up large objects like stones, large pieces of paper or any item that may clog the appliance.
  • Do not use the appliance to pick up flammable or combustible materials such as gasoline, printer or copier toner or use in areas where they may be present.
  • Do not use an appliance to pick up anything that is burning or smoking, such as cigarettes, matches hot ashes or anything that could cause a fire.
  • Do not put objects into the suction intake. Do not use if the suction intake is blocked keep the intake clear of dust, lint, hair or anything that may reduce airflow.
  • Take care not to damage the power cord. Do not pull on or carry the appliance by the power cord, use the power cord as a handle, close a door on the power cord or pull the power cord around sharp edges or corners. Do not run the appliance over the power cord. Keep the power cord away from hot surfaces.
  • Do not use the power cord if it is damaged, it is not to be repaired. Cease use immediately and contact help.Kogan.com for support.
  • Turn off the power switch before cleaning or maintaining the appliance.
  • Remove the power cord and turn off the power switch to the appliance before removing the battery for disposal of the appliance.
  • The battery must be removed and discarded according to local laws and regulations before disposal of the appliance.
  • Dispose of used batteries according to your local environmental laws and regulations.
  • Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire.
  • The appliance contains batteries that are only replaceable by trained professionals. To replace the battery, contact help.Kogan.com for support.
  • If the appliance will not be used for an extended time, power off and place it in storage.
  • WARNING: To recharge the battery, only use the power adapter supplied with this appliance.

COMPONENTS

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-1

OVERVIEW

Vacuum

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-2

Dust Bin

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-3

Remote Control

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-4

OPERATION

Quick Operation

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-5

Remote Control Function

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-6 kugan-com-KAVACRBR40A-Robot-Vacuum-
Cleaner-and-Mop-fig-7

  • Press this button to cycle through the different cleaning modes (Auto/Spot/Edge)

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-9

  • The vacuum will clean in a random zig-zag route.

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-11

  • The vacuum will begin cleaning in a spiral pattern.

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-13

  • Press this button, the machine cleans along the wall or furniture edge

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-15

Mop Function (wet/dry clean)

  • For mopping, damp the mop cloth with water and attach it to the lower part of the vacuum cleaner body. The vacuum cleaner will now operate in wet and dry-cleaning mode simultaneously.
  • When the mop pad is dirty. rinse it with clean water and reattach it to the vacuum cleaner to continue mopping.

Side Brush

  1. The right and left brushes are not interchangeable. The brushes can be identified by the center color of the side brush.
    • Left brush – GREY center
    • Right brush – YELLOW center
  2. To ensure a good use effect, users should clean the surrounding hair and other debris in time after using the machine for a period.
  3. The users should change the side brush according to the diagram left and right. (use the screwdriver to remove the fixed screw and side brush, then fix the side brush for replacement).
  4. For a good cleaning effect, please use the machine carefully.

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-16

BEFORE FIRST USE

Checks to the area
Ensure there are no loose wires or cables scattered on the ground. This is to prevent the vacuum from becoming entangled or dragged along.
Ensure all fragile items, those easy to topple, dangerous items, and valuables are removed. This is to prevent items from being damaged and personal injuries.

  1. Arrange chairs, tables, and other objects neatly to create the biggest space possible before cleaning.kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-fig-17
  2. It may be necessary to place a physical barrier at the edge of a drop to stop the unit from falling over the edge.kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-fig-18
  3. Do not use the vacuum to clean liquids.

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-19

CLEANING & CARE

Dust Bin

  1. Open the dust bin, remove the filter, and empty the dirt into the bin.kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-fig-20
  2. Clean the filter with water.
  3. Allow the filter to fully dry before placing it back in the vacuum.

Note
Clean the dust bin frequently to ensure effective operation and avoid overworking the motor.

Mop
Clean and dry the mop after every use.

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-23

Suction Inlet & Side Brushes

  • Clean the suction inlet and remove the dust and debris.
  • Release the screws and remove the two side brushes and clear the debris.

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-25

Note
Use a screwdriver to remove the screws, then hold them in place.

Additional Components

  1. Wipe the three cliff sensors on the underside of the vacuum.kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-fig-26
  2. Clean the gap between the cover and the front bumper.kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-fig-27
  3. Wipe the universal wheel, runner, and spindle to reduce noise and avoid debris getting caught in the moving parts.kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-fig-28
  4. Clean the Right and Left wheels to reduce noise and avoid debris getting caught in the moving parts.

kugan-com-KAVACRBR40A-Robot-Vacuum-Cleaner-and-Mop-
fig-29

TROUBLESHOOTING

Situation Possible Reason Solution

The unit not turning on

| Power switch in the off position| Turn the power switch on.
Ran out of battery| Charge with an adapter.


Unit not charging

| ****

Charging contact fail

| Ensure the power adapter is plugged into the vacuum and power socket correctly.
Unit going backwards| Cliff sensor dirty| Clean sensors with a dry cloth.
The unit cannot reverse| Front bumper stuck| Gently tap the front bumper.
Unit working abnormally| Wheels tangled| Clean the wheels and remove any dirt and debris.


Side brush abnormal

| Incorrectly installed| Reinstall correctly.
Tangled| Clean it with the side brush.
Dust bin abnormal| Incorrectly installed| Remove the dust bin and install it correctly.


Universal wheel abnormal

| ****

Tangled

| Clean the universal wheel and remove any dirt and debris.



Remote control can’t be used

| The remote control does not have batteries| Insert new AAA batteries.
The vacuum is out of range from the remote control.| Reduce the distance to within 4m without any obstructions in between.
Other abnormalities or issues persisting| N/A| Turn the vacuum off and then on.

If the problem persists, contact help.Kogan.com for support.

Note: If the above solution can’t solve the problems, contact help.Kogan.com for support.
Do not disassemble or attempt to repair the machine by yourself.

SPECIFICATIONS

  • Work voltage: 14.8V
  • Rated power: 16W
  • Rated Input Voltage: 19V
  • Rated Input Current: 0.6A
  • Adapter input: 100-240V, 50/60Hz. 0.5A
  • Adapter output: DC 19V 0.6A
  • Battery: Li-ion 2000mAh

Need more information?

  • We hope that this user guide has given you the assistance needed for a simple set-up.
  • For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

kugan com User Manuals

Related Manuals