YLW TECHNOLOGY BM-767 2.4G Receiver User Manual

YLW TECHNOLOGY BM-767 2.4G Receiver

FAQ

Frequently Asked Questions

• What is the charging voltage/current for the device?
  • The charging voltage/current for the device is DC 5V/1A.
• What are the compatibility options for this product?
  • This product is compatible with Android, iOS, PS3, PS4, SWITCH, and Windows System.
• How do I switch between X and D input modes?
  • To switch between X and D input modes, press the MODE button for 5 seconds to perform the interconversion.

Operation usage mode

Bluetooth mode

Other Bluetooth modes

The PS4 Bluetooth mode has no feature in the Android version.

2.4G pattern:

Wired mode:

PC device / smart TV / TV box / PS3 host 2. 4G wireless connection operation method:

1. Plug the 2.4G wireless receiver into the USB interface of the PC device / smart TV / TV box;
2. After pressing the L1 key + HOME key, the handle enters the wireless pairing mode, and the LEDI and LED2 indicators flash;
3. After wireless connection OK, LED and LED2 indicator lights will turn on;
4. You can start operating the PC device / smart TV / TV box / PS3 console to download and install the game.

Handle charging / hibernation / wake-up function:

1. When the handle is shut down (press HOME to open / turn off), the LED indicator light flashes slowly and always shines after filling. When charged under Bluetooth connection, the LEDA indicator light flashes slowly and lights on long after filling.
2. Sleep / wake up function: The game controller will be dormant when not in use for 5 minutes. When you need to be reused, press the HOME key to wake up to connect back;
3. When the battery power is low, the LED indicator light flash prompt.
4. The LED does not do the charging indication in the wired mode

Cable USB mode operation method and precautions:

1. Insert USB and wire, and the handle will automatically identify the current inserted device (no HOME button in wired mode) ;
2. USB, the LEDI LED2 LED LED flashes after insertion, and the indicator light after successful USB identification in PS 3 and Switch host mode will be automatically allocated according to the channel issued by the host (1,2,3,4 channels corresponding to LED1, LED2, LED, LED4).

Electrical parameters:

1. Working voltage: DC 3. 7V
2. Operating current: <18 mA
3. Continuous use: 20H
4. The resting current is set at: 0uA
5. Charging voltage / current: DC 5V/1A
6. Bluetooth transmission distance: 8M
7. Standby time: place for 30 days of full charge

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:

• The device has been evaluated to meet general RF exposure requirement.
• The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>