FEKER IK85Plus Plus Mechanical Keyboard Review Instructions
- June 20, 2024
- FEKER
Table of Contents
FEKER IK85Plus Plus Mechanical Keyboard Review Instructions
Product parameters
Product brand: FEKER
Product name: IK85Plus
Product structure: Leaf spring Gasket structure
Product size: 348.3×143.8x44mm
Product weight: 920g
Number of keys: 83Keys
Matris: Full key without impact
Connection method : Wired USB/Bluetooth/2.4G
Interface: Keywire separated typec interface
Battery capacity: 4000mAh
Backlight: RGB (18 sets of light effects)
Key cap : MOA PBT three piece key cap
Compatibility: Windows 7/8/9/10/11/Mac/Linux//Android/IOS
Switch indication instructions
MAC mode: Switch to MAC mode
WIN mode: Switch to Win mode
Push up : 2.4G mode
Middle: USB mode, factory default
Push down: Bluetooth mode
CAPS indicator light : CAPS key blue light indication
Lock win indicator light : WIN key blue light indication
Charging indicator light: When charging, the FN button’s red light is on
and off when fully charged, and the red light flashes quickly when the battery
is low
Lighting effect description
- After powering on, the light turns on and the white light runs around the keyboard, and the tail turns off. After running all the buttons, the light state before powering off is restored.
- The lighting order of the light mode is from top to bottom in the table, and after switching the mode, there is OFF.
- 18 lighting effects
Explanation of Sleep Mechanism
- Deep sleep: After 10 minutes of keyless operation on the keyboard, it will be in deep standby mode, with Bluetooth disconnected and dormant. Press any button to wake up the keyboard backlight and reconnect to Bluetooth;
- Power saving sleep: After 2 minutes of keyless operation on the keyboard, the backlight turns off. Press any button to wake up the keyboard backlight and connect back to Bluetooth;
Mode Connection Description
Bluetooth Profile Connection
Bluetooth name: FEKER IK85-1, FEKER IK85-2, FEKER IK85-3
- FN+Q: Short press to switch to Bluetooth 1, long press to pair Bluetooth 1
- 2FN+W: Short press to switch to Bluetooth 2, lang press to pair Bluetooth 2:
- FN+E: Short press to switch to Bluetooth 3, long press to pair with Bluetooth 3;
Operation: Alter the keyboard is tumed on, press and hold FN+Q/W/E to enter Bluetooth mode. Long press and hold the FN+Q/W/E combination key for 35, and the keyboard will enter the code checking state. The Q/W/E indicator light will flash quickly and white, and the indicator light will remain on when connectedAfter being unable to find the paired device for 30s, the exit code matching mode light turns off and the keyboard enters sleep
4G mode connection (Short press to switch to 2.4G, long press to pair with
2.4G)
Operation: After the keyboard is turned on, press FN+4 to enter 2.4G mode, and
then press the FN+4 combination key for 35 to enter pairing mode. After
inserting the receiver, the R indicator light will flash quickly and white.
Once pairing is successful, exit pairing, The mode light remains on for 2
seconds, and after 30 seconds when the paired device cannot be found, the exit
code matching mode light turns off, and the keyboard enters sleep.
Key composite function key description
Combination button| WIN function| MAC function (single press
trigger)| Describe
---|---|---|---
FN+F1| This computer| Screen brightness decrease| Flip the switch to select
MAC/WIN
FN+F2| Homepage| Screen brightness increase
FN+F3| Calculator| Multitasking controller
FN+F4| Player| Program List
FN+F5| Previous song| Nothing
FN+F6| Next song| Nothing
FN+F7| Play Pause| Previous song
FN+F8| Suspend| Play Pause
FN+F9| Mute| Next song
FN+F10| Volume-g| Mute
Key composite function key description
C ombination button| WIN function| MAC function (single press
trigger)| Describe
---|---|---|---
FN+F11| Volume+| Volume-| Flip the switch to select MAC/WIN
FN+F12| Mailbox| Volume+
FN+BAKSPACE| Long press and holdfor 3S to reset| Long press and hold for 3S to
reset| Keyboard backlight flashing three times withwhite light
FN+|| Keyboard backlighteffect switching| Keyboard backlight effect
switching| (Order: Colorful, Red, Orange, Yellow, Green,Green, Blue, Purple,
White)
FN+Enter| Keyboard backlighteffect switching| Keyboard backlight effect
switching| 18 default light effects follow the current
FN+Space| Check battery level(wireless mode The power supply from the lower
battery is effective| Check battery level (battery power is valid in wireless
mode)| Press the combination key Fn+space, thebacklight will turn off, and the
number keys 1 to 0 will light up the light displays the proportion of battery
power, for example: 1 is on, indicating 10% battery power, 1 and 2 on,
indicates 20% battery capacity. And so on. (Below 30% in red,
FN+Home| END| END| Below 50% yellow, above 50% green).——
Combination button| WIN function| MAC function (single press trigger)|
Describe
---|---|---|---
FN+DEL| INS| INS| ——
FN+L| Keyboard backlightswitch| Keyboard backlight switch| ——
FN+WIN-L| Lock WIN| Nothing| WIN bright blue light
FN+→| Light speed slows| ——| When in the extreme gear position, the up, down,
| down| | left, and right lights flash three times to indicate.
FN+←| Accelerated lightspeed| ——| When in the extreme gear position, the up,
down,left, and right lights flash three times to indicate.
FN+↑| Light brightness+| ——| When in the extreme gear position, the up,
down,left, and right lights flash three times to indicate.
FN+↓| Light brightness-| ——| When in the extreme gear position, the up, down,
left, and right lights flash three times to indicate.
FN+,<| Accelerated lighteffect speed| Accelerated light effect speed| When in
the extreme gear position, the up, down,left, and right lights flash three
times to indicate.
FN+.>| Slow down lighteffect speed| Slow down light effect speed| When in the
extreme gear position, the up, down,left, and right lights flash three times
to indicate.
| | |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>