Niccy 30X22 LED Bathroom Mirror Instruction Manual

30X22 LED Bathroom Mirror

Specifications

• LED Light Color: Adjustable from 3000K to 6000K
• Anti-fog Function: Yes

Installation Instructions

1. Gather the following installation tools:
   • Churn drill
   • Appropriate drill bit
   • Hammer
   • Screwdriver
2. Ensure that the wall is solid and the main electricity supply is turned off.
3. Mark the desired height of the mirror on the wall.
4. Choose the churn drill with an appropriate drill bit and make two holes on the marked places.
5. Take the expansion rubber plug from the accessory bag and strike it into the holes on the wall using a hammer.
6. Tighten the screws into the holes using a screwdriver. Insert the plug.
7. Open the carton and ensure that all the parts are present.
8. Hang the mirror onto the screw crossing two hardy holes to fix it securely.
9. Switch on the power and touch the sensor to test the product.

Operating Instructions

1. To turn on/off the LED light:
   • Power on by short pressing the sensor.
   • Press the sensor again to turn off the light.
2. To activate/deactivate the anti-fog function:
   • Press the sensor once to turn on the anti-fog function. The sensor will display a blue light.
   • Press the sensor again to turn off the anti-fog function.
3. To adjust the LED light brightness and color:
   • Long press the touch switch to enter the adjustment mode.
   • Continue pressing the touch switch to adjust the LED light brightness. The color temperature can be adjusted from 3000K to 6000K.
   • Release the touch switch to save the desired brightness and color.

FAQ

• Q: How do I install the LED Mirror?
  • A: Please follow the installation instructions provided above.
• Q: How do I turn on/off the LED light?
  • A: Short press the sensor to turn on the light. Press the sensor again to turn off the light.
• Q: How do I activate/deactivate the anti-fog function?
  • A: Press the sensor once to turn on the anti-fog function (indicated by a blue light). Press the sensor again to turn it off.
• Q: How do I adjust the LED light brightness and color?
  • A: Long press the touch switch to enter the adjustment mode. Continue pressing to adjust the brightness and release to save.

Installation Instructions for LED Mirror

1. Installation tools (as shown below)
2. Make certain the wall is solid, and the main electricity supply has been power-off
3. Open the carton and make sure all the parts listed below are present
4. Open the carton and make sure all the parts listed below are present
5. Mark the desired height of the mirror. Choose the churn drill with an appropriate drill bit to make two holes on the marked places.
6. Use the hammer to strike the expansion rubber plug in accessory bag into the holes on the wall,and then use a screwdriver to tighten the screws into the holes.
7.  Insert the plug.
8. Hang the mirror onto the screw crossing two hardy holes to fix it. Finally, switch the power, and touch the sensor to test the product.

Operating instruction

Turn on LED light and anti-fog funtion

1. Power on, short press to turn the light again to turn the light on, press the sensor off.
2. Press the sensor , When anti-fog funtion is turned on, the sensor is in blue light.

Adjust the LED brightness and light color

• Long press the touch switch to adjust the LED light brightness(from 3000K-6000K)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>