taurus Menina Glass Blender Owner’s Manual

: June 16, 2024
: taurus

Table of Contents

Taurus Menina Glass Blender
IMPORTANT SAFEGUARDS
OPERATING INSTRUCTIONS
How to use
CARE AND MAINTENANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Taurus Menina Glass Blender

Taurus-Menina-Glass-Blender-PRODUCT

BEFORE STARTING

Dear Customer,
Thank you for purchasing a TAURUS appliance. Its technology, design, and functionality will give you total satisfaction for a long time. Its technology, design, and functionality will provide you with total satisfaction for a long time. TAURUS actively participates in the presentation of the environment. The packing materials of this appliance are recyclable. II you want to get rid of them. you can use the appropriate public containers for each type of material.

IMPORTANT

Read this user manual completely before assembling or starting to use your product.
Before connecting the appliance to the power source, check whether the mains voltage is compatible with the one marked on the appliance 127 V -.
Remove all packing material from the product.
Follow cleaning instructions before using it for the first time.

TIPS AND SAFETY WARNINGS

READ ALL INSTRUCTIONS BEFORE ASSEMBLING AND USING THE PRODUCT SAVE THESE INSTRUCTIONS FOR FUTURE USE.
KEEP THIS APPLIANCE AWAY FROM WATER, DO NOT USE IT NEAR SINKS OR OTHER CONTAINERS THAT MAY CONTAIN LIQUIDS.
PLACE YOUR APPLIANCE ON DRY, STABLE, AND FLAT SURFACES. DO NOT PLACE THE UNIT NEAR OR OVER GAS OR ELECTRIC STOVES, NEITHER NEAR HOT OVENS.

DANGER : AS WITH MOST ELECTRICAL APPLIANCES, THE PARTS OF YOUR APPLIANCE HAVE AN ELECTRICAL CURRENT WHILE IT IS CONNECTED ALTHOUGH THE APPLIANCE IS OFF.

WARNING : DANGER OF ELECTRIC SHOCK

Recommendations:

Use grounded outlet only
Do not use extension cords, adapters, or timers.
Do not overload the electrical outlet where you are using this appliance.
Always place on dry and stable surfaces. Do not handle it with wet hands. Before connecting, check that the connection and the cord are completely dry.
Do not immerse in water or any other liquid. DO NOT USE IT IF THE PRODUCT FALLS INTO THE WATER.

IMPORTANT SAFEGUARDS

Before using the product for the first □me, clean all the components of the appliance that may come into contact with food according to the cleaning section of this manual
Children should not use this device. Keep the device and the cable out of reach.
Not intended for use by or near children or persons with reduced physical sensory, or mental capabilities or lack of experience and knowledge.
Close supervision is necessary when any appliance is used by or near children or incapacitated persons. Be sure to store the appliance out of reach.
This unit is not a toy. You should supervise children to make sure they do not play with the unit.
To reduce the risk of electrical accidents, never operate this unit with wet hands, and do not immerse it in water, or place it on spilled Liquids.
Do not leave the power cord hanging, or allow it to come in contact with hot or sharp surfaces.
Do not leave it or keep the appliance near where there is a risk of falling or throwing it in the bathtub, sink, or another water container.
If it accidentally falls into water, “unplug· it immediately. DO NOT Introduce your hand In lhewatarto takeout.
Never use this unit if the power cord or plug is damaged, if it is not operating properly, if it has been dropped, damaged in any part. leaked, or accidentally dropped into water or Liquid. Take the unit to an authorized service center by the manufacturer for inspection and/ or repair.
Use this blender only for what it was designed and described in this manual. Do not use accessories that are not recommended by the manufacturer.
Do not place the unit near or over gas or electric ranges, or near hot ovens.
You must not use it outdoors.
Watch our Tum off and unplug the appliance before starting. cleaning, changing accessories, or storing them.
Always turn off and unplug your blender immediately after use.
To avoid the risk of electric shock, do not insert anything into the cavi□es of the appliance.
If any of the enclosures of the appliance break, disconnect immediately from the electrical network to avoid the possibility of an electric shock
Do not force the power cord. Never use the power cord to transport. Lift or disconnect the blender.
Never wrap the power cord around the appliance. Constantly check the perfect condition of the cable, as damaged or entangled cables increase the risk of electric shock. Do not let it get wrinkled or trapped.
DO NOT INSERT AfNSTRANGE OBJECT INTO lHE JAR WHILE lHE BLENDER IS IN OPERATION, once your blender is turned off and unplugged you can use a rubber spatula to move the food, which must be removed from the jar before plugging the blender again.
IT IS NOT RECOMMENDED TO PROCESS HOT LIQUIDS OR INGREDIENTS, AS lHEY MAY GET PRESSURIZED AND SUDDENLY EJECTlHE LID CAUSING SOME PHYSICAL INJURIES.
The manufacturer is not responsible for any damage caused by improper use of the device.
Never overfill the blender jar, be sure not to fill above the maximum level mark
Make sure the unit is on a flat. safe surface before it is turned on.
Make sure all electrical connections are clean and dry.
Make sure that the Lid is properly closed before turning on the unit.
Never leave the appliance unattended while it is in use.
Do not move or turn around the appliance while it is in operation or connected to the outlet.
When removing the blades for washing, be sure to assemble them correctly. Before using again make sure they are completely dry.
Do not use the unit with timers or any device that automatically turns the device on and off.
NEVER put your hand or any foreign object into the blender jar, if it is placed over the motor base and even less ii the appliance is connected to the electric outlel
Extreme caution ii pouring hot liquids into your blender, as they could be thrown out of the appliance suddenly as a result of sudden steam.
Switch off and disconnect the appliance from the power supply, before handing, changing accessories, or having contact with the moving parts of the appliance.

THE FAILURE TO FOLLOW ANY OF THE SAFETY WARNINGS, IMPORTANT SAFEGUARDS, AND INSTRUCTIONS IS A MISUSE OF YOUR BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.

HOW TO EXTEND THE LIFETIME OF YOUR PRODUCT

Do not remove the jar from the blender body until the blades have stopped completely. This action will prevent the wear of the drive system.
Make sure to assemble correctly the integrated blade assembly and the rubber ring to the jar before using the appliance to avoid any leakage that could damage the motor.

PARTS OF THE BLENDER

Motorbase
Control switch
Blades system
- Integrated blade assembly
- Seating ring (rubber ring)
1 titer glass jar (Menina glass) / 1 titer plastic jar (Menina)
lid
Filler cap hole
Led indicator

$Taurus-Menina-Glass-Blender-fig- $1$$ $Taurus- Menina-Glass-Blender-fig- $2$$

OPERATING INSTRUCTIONS

Use and care

Before each use, fully unwrap the power cord of the appliance.
Do not use the appliance if its accessories are not properly attached.
Do not use the appliance with an empty jar.
Do not use the appliance if the on/ off function does not work.
Do not move or turn around the appliance while it is in use or plugged into the outlet.
Do not exceed the maximum capacity indicated on the glass jar.
Unplug the appliance from the outlet when it is not in use, before removing or installing accessories, and before starting cleaning.
Extreme precautions when handling the blades: either when emptying the jar, removing or putting them on the appliance, or during cleaning. The blades of your appliance are extremely sharp and could cause damage.
Before each use, check that the moving parts are not misaligned or locked and that there are no broken parts or other conditions that may affect the proper functioning of the appliance.
Never leave the device connected and unattended, this will also save energy and extend the life of the device.
Do not forget to position correctly the sealing ring with the integrated blade assembly, since food or liquids could leak.
IT IS RECOMMENDED NOT TO USE THE BLENDER FOR MORE THAN 2 CONTINUOUS MINUTES. FOR EVERY 2 MINUTES OF USE, YOU SHOULD ALLOW IT TO COOL DOWN FOR 10 MINUTES BEFORE USING IT AGAIN.
Your product. is not recommended for processing hot liquids or foods.

Assembling the Jar

Insert the sealing ring into the integrated blade coupling.
Screw the blade system to the bottom of the jar by turning it counterclockwise to tighten.
Place jar assembly onto the motor base fitting the tabs of the blade coupling into the slots in the base and turning clockwise. The click sound (Easy Fit Technology) indicates that the jar assembly is correctly attached to the motor base.
To remove the jar from the motor base, turn it counterclockwise and lilt.

How to use

Put inside the jar the food that will be processed without exceeding the maximum indicated level (1 liter).
Place the lid onto the jar and press down to seal it hermetically.
Place the jar assembly onto the motor base as it is indicated in the “assembling the jar” section.
Make sure the blender is turned off, the control must be selected position, and plug the blender into the electric outlet.
Turn the control panel to the right to use the continuous speed of the blender or to the left to select the pulse function.
Use the filler cap hole to add ingredients into the jar at any time while the blender is working.
When finished processing, turn off the blender by selecting the “O” position with the control switch and unplug the appliance from the power outlet.

Unclogging the engine
It could happen that food residuals may get under the blades or even the blend itself could be too thick and the blades could stuck in that case stop the blender by selecting ·o· (off position) with the control switch, remove the jar from the motor base and unclog the food residuals with a rubber spatula, once you unclog the residuals, take the spatula outside the blender, close the lid, put the jar back onto the motor base following the section “Jar assembly” and continue to blend.

CLEANING

Turn the control switch to the off position to stop the blender and unplug it from the power outlet. Wait until the appliance has completely cooled down before starting cleaning.
Clean the motor base unit with a lightly wet cloth with a small amount of soap and dry.
Do not apply solvents or any cleaning agent with an acid PH degree such as bleach, or abrasives. Do not let water or any other fluid enter into the ventilation grid, submerge the motor base in water, or allow direct contact with the water jet.
To clean the jar, remove it from the motor base and wash it with a soft sponge and dishwashing detergent. Allowed to completely dry before setting it back, wash the lid as well.
We strongly suggest removing the sealing ring and the blades as well regularly and washing them with a soft sponge and dishwashing detergent, before attaching them back, these attachments should be completely dry before operating the blender again.

CARE AND MAINTENANCE

This appliance requires just a little maintenance since it does not contain any parts that could be repaired, so do not try to repair them by yourself. If necessary take your appliance to an authorized service center or directly to the original place of purchase.

STORAGE
Be completely sure the appliance is turned off and unplug it from the electrical power supply, clean it as described on the CLEANING part, and allow it to dry completely, then you can store it in a clean, dry place away from the reach of the children or people with any sort of disability.

DEFECTS AND REPAIRMENT
If the electrical power supply cord is damaged in any way, it should be replaced directly by the manufacturer or in an authorized service center to avoid any personal hazard. Do not try to repair it yourself, do this for any other defect that may further appear.

SPECIAL RECOMMENDATIONS
TAURUS will not be responsible for any defect that occurs as a bad interpretation of the text from this instructions manual In case you need further information contact directly with your seller.

GUARANTEE
This “blender” is guaranteed by TAURUS for a 2-year lapse, starting from the purchase date.

TERMS
To apply the guarantee, you will only be asked to present the product itself and this policy, properly filled and sealed along with the actual date when this appliance was purchased, by the place where it was originally acquired or any authorized service center you can find through the directory attached within.

Our guarantee includes repair, replacement, or the physical change of the product or any attachment or spare part free of charge, this includes the labor as well as the shipping cost. The time spent to repair this unit will be a thirty working day period starting from the date when the unit was received by the authorized manufacturer service center where this guarantee can be claimed.

The customer can claim the guarantee directly through the place where the appliance was purchased, as well. Please note that if this guarantee is misplaced or lost the customer can always go to the supplier to ask for a new guarantee policy by presenting his purchase ticket or invoice.

VOID OF THE GUARANTEE
This guarantee does not cover:

Any situation derivate of operating this product differently from the normal conditions.
Any situation derivate of operating this product differently from those guidelines mentioned in this instructions manual.
When this product had been disarmed, repaired, or modified by non-authorized TAURUS-ESPAÑA S.A. de C.V. personnel. No other guarantee, either verbal or print different from this will be accepted by TAURUS-ESPAÑA S.A DE C.V. Original spare parts or attachments can directly be acquired through any of the authorized service centers mentioned in the directory attached.

To claim the guarantee of this product:

Take the appliance along with this policy properly filled, sealed, and dated by the place where his unit was purchased, to the nearest authorized service center. You can find the nearest to your home on the directory attached or on our web page: https://www.taurus.com.mx/servicio-tecnico/
If there is not an authorized service center near you call 800 777 81 62 where someone will guide you on how to claim the guarantee.