MOTOROLA SOLUTIONS R7 Series Portable Two Way Radio Instruction Manual

: June 27, 2024
: Motorola Solutions

Table of Contents

MOTOROLA SOLUTIONS R7 Series Portable Two-Way Radio
Specifications
Assembly Instructions
Battery Installation
Operation
Chapter 5: Disassembly and Reassembly Procedures
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOTOROLA SOLUTIONS R7 Series Portable Two-Way Radio

Specifications

Brand: MOTOTRBO
Model: R7 Series
Type: Portable Two-Way Radio
Battery: Lithium Rechargeable Coin Cell Battery, 3.4 mAh
Frequency: Tri-band Connectivity (GPS/BT/Wi-Fi/2.4-5 G)

Assembly Instructions

Attach the Volume knob (Item 1.0) and Frequency knob (Item 2.0) to the device.
Insert the Keypad (Item 3.0) into the designated slot.
Secure all parts using the appropriate screws and retainers listed in Table 57.

Battery Installation

Locate the Lithium Rechargeable Coin Cell Battery (Item 11.0).
Insert the battery into the designated compartment according to the polarity markings.
Secure the battery compartment with the O-Ring Main Seal (Item 12.0).

Operation

Turn on the device by pressing the power button.
Use the Volume knob to adjust the audio output.
Press the necessary buttons on the Keypad to operate the radio functions.

5.6
Radio Exploded Mechanical Views and Parts Lists

5.6.1
Full Keypad Model Exploded View and Parts List
Figure 7: Full Keypad Model Exploded View

Table 57: Full Keypad Model Exploded View Parts List

Item	Description	Part Number
1.0		Volume knob
2.0		Frequency knob
3.0		Keypad
4.0		Countersunk Machined Screw M1.6
5.0		Front Kit
	5.01	Front Housing Assembly FKP
	5.02	Speaker Mesh
	5.03	Speaker Assembly, 36 mm, 8 Ω
	5.04	Speaker Retainer
	5.05	Thread Forming Screw
	5.06	Antenna, PCB Assembly, Tri-band Connectivity (GPS/BT/Wi-Fi/2.4-5 G)

AN000389A01
| 5.07| Front Microphone Membrane Seal| SL000710A01
| 5.08| Front Microphone Boot Seal| SL000606A01
| 5.09| Antenna Retainer| HW002762A01
| 5.10| Front Microphone Backer Retainer| HW002844A01
| 5.11| Kapton Tape| HW002863A01
| 5.12| Display Poron Pad| HW003151A01
| 5.13| PCBA, GCAI Mini Flex| PA003038A01
| 5.14| Display Module-LC| See the Additional Parts List Table on page 141
| 5.15| Microphone Adhesive| HW003344A01
| 5.16| Side Display Pad| HW002772A01
| 5.17| PCBA (Ground Flex)| PA003292A01
| 5.18| Pad Back Display| HW002773A01
| 5.19| Display Retainer| BR000513A01
| 5.20| Keypad Retainer Screw| 0378212A04
| 5.21| Conductive Pad GCAI| HW002800A01
| 5.22| Conductive Retainer Pad| HW002790A01
| 5.23| Conductive Display Pad Flex| HW002792A01
| 5.24| Conductive PTT Pad| HW002791A01
| 5.25| Conductive LCD Pad| HW002788A01
| 5.26| Support Poron Pad| HW002966A01
| 5.27| Interface (FKP) Block| 0104083J15
6.0| | Poron Pad, VCO Shield| HW003537A01

Chapter 5: Disassembly and Reassembly Procedures

Item	Description	Part Number
7.0		GOB1 Service Kit
	7.01	M2 Tapping Screw
	7.02	GOB Flex PCB
8.0		Main Flex Accessory PCBA
9.0		Top Control Seal
10.0		M2 Tapping Screw
11.0		Lithium Rechargeable Coin Cell Battery, 3.4 mAh
12.0		O-Ring Main Seal
13.0		Top Control Retainer
14.0		Top Control PCBA Flex
15.0		Thermal Pad
16.0		Chassis Poron Pad
17.0		Rear Microphone Boot Seal
18.0		Rear Microphone Membrane Seal
19.0		Chassis
20.0		Battery Contact Seal
21.0		Gasket
22.0		Vent Seal Label
23.0		Back Shroud Poron
24.0		Shroud Retainer FKP and NKP
25.0		Machined Shroud Screw
26.0		Nameplate

Table 58: Only Applicable for Model PMUD3531ACC

Item	Description	Part Number
7.0		PDT GOB Service Kit
	7.01	M2 Tapping Screw
	7.02	GOB Flex PCB

5.6.2
Non-Keypad Model Exploded View and Parts List
Figure 8: Non-Keypad Model Exploded View

Table 59: Non-Keypad Model Exploded View Parts List

Item	Description	Part Number
1.0		Volume knob
2.0		Frequency knob
3.0		Front Kit
	3.01	Front Housing Assembly NKP
	3.02	Antenna, PCB Assembly, Tri-band Connectivity (GPS/BT/Wi-Fi/2.4-5 G)

AN000389A01
| 3.03| Front Microphone Membrane Seal| SL000710A01
| 3.04| Front Microphone Boot Seal| SL000606A01
| 3.05| Antenna Retainer| HW002878A01
| 3.06| Front Microphone Backer Retainer| HW002844A01
| 3.07| Keypad Retainer Screw| 0378212A04
| 3.08| PCBA, GCAI Mini Flex| PA003038A01
| 3.09| Speaker Mesh| HW002888A01
| 3.10| Speaker Assembly, 36 mm, 8 Ω| 0112908K01
Item| Description| Part Number
---|---|---
| 3.11| Speaker Retainer Assembly| 0112980J66
| 3.12| Thread Forming Screw| FN000562A01
| 3.13| Microphone Adhesive| HW003344A01
| 3.14| Conductive PTT Pad| HW002791A01
| 3.15| Grounding Pad, Speaker| HW002897A01
| 3.16| Conductive Pad GCAI| HW002800A01
| 3.17| Conductive PTT Pad| HW003144A01
| 3.18| Poron Pad, GCAI Flex| HW002881A01
| 3.19| Poron Pad, PTT Flex| HW002880A01
| 3.20| PTT Top Poron Pad| HW002879A01
| 3.21| Stiffener PTT Flex| HW003254A01
| 3.22| NKP Spring Pad| HW003290A01
| 3.23| Interface (NKP) Block| 0104083J21
| 3.24| Keypad Retainer Screw| 0378212A04
4.0| | GOB1 Service Kit, PCBA| PMLN8203_S
| 4.01| M2 Screw, Tapping| 03012034001
| 4.02| M2 Tapping Screw| PF003027A01
5.0| | Poron Pad, VCO Shield| HW003537A01
6.0| | Main Flex Accessory PCBA| PA002996A01
7.0| | Top Control Seal| SL000610A01
8.0| | M2 Tapping Screw| 03012034001
9.0| | Lithium Rechargeable Coin Cell Battery, 3.4 mAh| 60009265001
10.0| | O-Ring Main Seal| SL000609A01
11.0| | Top Control Retainer| HW002765A01
12.0| | Top Control PCBA Flex| PA002952A01
13.0| | Thermal Pad| 75012234001
14.0| | Chassis Poron Pad| HW002848A01
15.0| | Rear Microphone Membrane Seal| SL000666A01
16.0| | Rear Microphone Boot Seal| SL000636A01
17.0| | Chassis| CH000292A01
18.0| | Battery Contact Seal| SL000611A01
19.0| | Gasket| 3286058L01
20.0| | Vent Seal Label| LB001662A01
21.0| | Back Shroud Poron| HW002866A01
22.0| | Shroud Retainer FKP and NKP| HW002766A01
23.0| | Machined Shroud Screw| 0386104Z11
Item| Description| Part Number
---|---|---
24.0| | Nameplate| LB001707A01

5.6.3
Simple Non-Keypad Model Exploded View and Parts List
Figure 9: Simple Non-Keypad Model Exploded View

Table 60: Simple Non-Keypad Model Exploded View Parts List

Item	Description	Part Number
1.0		Volume knob
2.0		Frequency knob
3.0		Front Kit
	3.01	Front Housing Assembly NKP
	3.02	Front Microphone Membrane Seal
	3.03	Front Microphone Boot Seal
	3.04	Front Microphone Backer Retainer
	3.05	Antenna Retainer
	3.06	Keypad Retainer Screw
	3.07	Microphone Adhesive
	3.08	PCBA, GCAI Mini Flex
Item	Description	Part Number
---	---	---
	3.09	Speaker Mesh
	3.10	Speaker Assembly, 36 mm, 8 Ω
	3.11	Speaker Retainer Assembly
	3.12	Thread Forming Screw
	3.13	Conductive PTT Pad
	3.14	Grounding Pad, Speaker
	3.15	Conductive Pad GCAI
	3.16	Conductive PTT Pad
	3.17	Poron Pad, GCAI Flex
	3.18	Poron Pad, PTT Flex
	3.19	PTT Top Poron Pad
	3.20	Stiffener PTT Flex
	3.21	NKP Spring Pad
	3.22	Interface (NKP) Block
	3.23	Keypad Retainer Screw
4.0		Poron Pad, VCO Shield
5.0		Main Flex Accessory PCBA
6.0		Top Control Seal
7.0		M2 Tapping Screw
8.0		O-Ring Main Seal
9.0		Top Control Retainer
10.0		Top Control PCBA Flex
11.0		Thermal Pad
12.0		Chassis
13.0		Battery Contact Seal
14.0		Gasket
15.0		Vent Seal Label
16.0		Shroud Retainer Basic NKP
17.0		Machined Shroud Screw
18.0		Nameplate

5.6.4
Additional Parts List Table
Table 61: Keypad

Motorola Solutions Part Number| Description| Super Tanapa 20
---|---|---
UHF
KP000218A01| Keypad (Roman)| ● PMUE5722_AB

● PMUE5722_BB

● PMUE5724_AB

● PMUD3491_BB

● PMUD3493_AB

● PMUF2000_BB

● PMUF2002_AB

350 MHz Band
KP000218A01| Keypad (Roman)| ● PMUD3531_AB

● PMUD3532_BB

KP000218A05| Keypad (Simplified Chi‐ nese)| PMUD3531_CC

Table 62: Front Kit

Motorola Solutions Part Number| Description| Super Tanapa 20
---|---|---
UHF
PMLN8238_| Front Kit FKP UL| ● PMUE5722_AB

● PMUE5722_BB

PMLN8239_| Front Kit FKP Non-UL| ● PMUE5724_AB

● PMUE5724_AC

● PMUE5724_AD

● PMUE5724_AE

● PMUE5724_AF

● PMUE5724_AG

PMLN8243_| Front Kit NKP UL| ● PMUE5723_AA

● PMUE5723_BA

PMLN8326_| Front Kit NKP Basic| ● PMUE5741_AA

● PMUE5741_ZA

● PMUE5741_YA

VHF
PMLN8359_| Front Kit FKP UL ITO Film| ● PMUD3491_AB

● PMUD3491_BB

PMLN8366_| Front Kit FKP Non-UL ITO Film| ● PMUD3493_AB

● PMUD3493_AC

● PMUD3493_AD

● PMUD3493_AE

● PMUD3493_AF

● PMUD3493_AG

PMLN8243_| Front Kit NKP UL| ● PMUD3492_AA

● PMUD3492_BA

PMLN8326_| Front Kit NKP Basic| ● PMUD3494_AA

● PMUD3494_ZA

● PMUD3494_YA

800/900
PMLN8238_| Front Kit FKP UL| ● PMUF2000_AB

● PMUF2000_BB

PMLN8239_| Front Kit FKP Non-UL| PMUF2002_AB

Table 63 : Display Module

Motorola Solutions Part Number| Description| Super Tanapa 20
---|---|---
PMLN8243_| Front Kit NKP UL| ● PMUF2001_AA

● PMUF2001_BA

PMLN8326_| Front Kit NKP Basic| ● PMUF2003_AA

● PMUF2003_ZA

350 MHz Band
PMLN8239_| Front Kit FKP Non-UL| ● PMUD3531_AB

● PMUD3531_CC

PMLN8238_| Front Kit FKP UL| PMUD3532BB
PMLN8243| Front Kit NKP UL| PMUD3530_AA
Motorola Solutions Part Number| Description| Super Tanapa 20
---|---|---
UHF
DM000160A01| Display Module-LC, TFT- VA,240 Pixels, 320 Pixels (UL)| ● PMUE5722_AB

● PMUE5722_BB

DM000160A02| Display Module-LC, TFT- VA, 240 Pixels, 320 Pixels (Non-UL)| ● PMUE5724_AB

● PMUE5724_AC

● PMUE5724_AD

● PMUE5724_AE

● PMUE5724_AF

● PMUE5724_AG

VHF
DM000160A03| Display Module-LC, TFT- VA, 240 Pixels, 320 Pixels (UL Display and ITO Film)| ● PMUD3491_AB

● PMUD3491_BB

DM000160A04| Display Module-LC, TFT- VA, 240 Pixels, 320 Pixels (Non-UL Display and ITO Film)| ● PMUD3493_AB

● PMUD3493_AC

● PMUD3493_AD

● PMUD3493_AE

● PMUD3493_AF

● PMUD3493_AG

800/900
DM000160A01| Display Module- LC, TFTVA,240 Pixels, 320

Pixels (UL)

| ● PMUF2000_AB

● PMUF2000_BB

Motorola Solutions Part Number| Description| Super Tanapa 20
---|---|---
DM000160A02| Display Module-LC, TFTVA, 240 Pixels, 320 Pixels (Non-UL)| PMUF2002_AB
350 MHz Band
DM000160A01| Display Module- LC, TFTVA,240 Pixels, 320

Pixels (UL)

| PMUD3532_BB
DM000160A02| Display Module-LC, TFTVA, 240 Pixels, 320 Pixels (Non-UL)| ● PMUD3531_AB

● PMUD3531_CC