Hover X1 App Instructions
- June 16, 2024
- HOVER
Table of Contents
Hover X1 App
Download Hover X1 App
Scan QR code to download and install Hover X1 App
Hover X1 App Introduction
- Using App to connect Hover, you can download captured contents, view album contents, modify the flight mode and capture mode.
Connect the Hover
Hover and App are connected via Bluetooth, please follow the steps below
- Open Hover;
- Open App, tap to enter the camera page, and turn on Bluetooth according to the prompt;
- Clicking to search for a nearby Hover, and you can select a connection based on the device name..
Note: If you are unable to search for Hover for an extended period, Press and hold the “Power Button” and “Mode Button” for 3 seconds until the status indicator is blinking blue.
Download the work
After each Bluetooth connection to Hover, if there is a new shot, you can tap on the camera page to view the thumbnail and select the work to download. You can click on to view the usage of storage space. After downloading, the contents can be viewed on the home page or in the local album of the mobile phone.
Note: You need to connect to Hover’s Wi-Fi to download your work. Please wait for the connection to complete as instructed.
Hover parameter settings
- After Bluetooth is connected to Hover, you can click to view and modify the parameters of each flight mode in the Hover page to take better pictures
Preview screen
Click “Smart Preview” on the Hover page to control the Hover to fly a creative trajectory and take pictures.
Control flying
Click “Manual Control” on the Hover page to control the Hover to fly a
creative trajectory and take pictures
Firmware Update
Check the firmware version number in Firmware Upgrade. If the latest firmware version is not available, proceed as follows
- Click in the camera page and select “One-click Upgrade”;
- When the App downloads the firmware package, it will be prompted to connect to Hover’s Wi-Fi to transfer the firmware package;
- When the transfer is complete, Hover will begin upgrading the firmware. During the upgrade process, the status light is blue, and after the upgrade is successful, the status light is green. Please pay attention to the change of the status indicator;
- After a successful upgrade, the latest version number is displayed.
Note: During the firmware upgrade, keep the Hover at room temperature with a charge above 30%.
General function
Account management
You can modify the user name, user avatar, associated mobile phone number or mailbox, modify the login password, log out, and cancel the account.
My Hover
View connected Hover information, including name, SN code, firmware version, binding status, etc. The name can be modified, or removed.
Anti-stroboscopic
For iOS users, it can adapt to the power frequency of different countries and regions to prevent stroboscopic phenomena when shooting.
About
View App version, privacy agreement, terms of service and other information