Popsockets Power Adapter Charger User Manual

Power Adapter Charger
User Manual

INSTRUCTIONS

1. Connect the power adapter to the charger using the supplied USB-A to USB-C cable. Plug the power adapter into an outlet. The charger’s LED will turn on for
   3 seconds indicating the charger is ready for use.

2. Place your phone backside down onto the charger. The charger’s LED will pulse slowly to confirm the connection. Once confirmed, the LED will slowly fade and remain off during charging.

3. PopPower 2 is made specifically for devices with a PopSockets PopGrip, but it can charge all Qi-certified devices. To charge small devices, such as wireless earbuds, place the Power Pocket cover onto the charger (Fig. 3) and set the device on top. Center the device to ensure the best connection.

LED OPERATION

*If at any time you see a fast blinking red light, your charger has entered error mode. Remove your phone, and any foreign objects that may be on the charger, and repeat steps 1 and 2 above. If this error persists, contact PopSockets Customer Service.

READ THE FOLLOWING SAFETY PRECAUTIONS BEFORE USING YOUR WIRELESS CHARGER

1. Metal and Other Foreign Objects: Do not place items containing metals, such as keys, magnets, coins, batteries, or jewelry, between the wireless charger and a mobile device. Detach from the mobile device PopSockets PopTops containing metal (including, but not limited to, Enamel, Aluminum, Backspin, Pressed Flower, and metal rimmed premium PopTops). These objects will prevent the wireless charger from operating and may overheat. Materials with magnetic strips or radiofrequency identification (RFID), such as credit cards, entry keycards, passports, and driver’s licenses, should not be placed between the wireless charger and a mobile device. These items may be damaged by the magnetic field generated by the wireless charger. Accessory wallets, including the PopSockets PopWallet, must be detached from mobile devices prior to charging. Cosmetics and wax products, such as makeup, lip balm, and candles, should not be placed on the wireless charger during or after charging. Normal charging temperatures may cause these materials to melt.
2. Environment: Use indoors, out of direct sunlight, in a dry and ventilated location. It is recommended to use your wireless charger on a hard, flat surface such as a countertop, table, or desk. Do not place the wireless charger or power adapter under blankets, pillows, or other insulating materials while connected to power. This may cause the device to overheat. Do not use the wireless charger in an explosive environment where high concentrations of flammable dust, powder, gas, vapors, particles, or liquid droplets are in the air.
3. Water and Conductive Materials: Do not expose the wireless charger or power adapter to moisture or conductive materials, such as liquids, metal dust, or pencil shavings. Keep power ports free of foreign metal objects. Do not use the wireless charger or power adapter near sinks, showers, or bathtubs, and do not operate with wet hands. Exposure to water or conductive materials may result in electric shock, injury, fire, or damage to the device or other property.
4. Handling: Your wireless charger has internal components that may be damaged if the device or its accessories are roughly handled, compressed, punctured, subjected to high impacts, or exposed to liquids. Handle with care. Keep out of reach of small children and animals. This product is intended for adult use only. Handling by small children or animals may cause device damage or personal injury. If you experience problems with your wireless charger or suspect damage, immediately discontinue product use. Misuse can cause electric shock.
5. Power Adapter: Your wireless charger is intended to be used with the original QC 3.0 adapter you received with the product. Failure to use the PopSockets power adapter may result in a safety hazard or damage to the device. For safe operation, plug the power adapter into a nearby power outlet that is easily unplugged. Immediately discontinue product use if there is damage to the power adapter prongs or USB connectors, if the cord becomes cut, deformed, or frayed, if the power adapter has been dropped or damaged, or if liquid is spilled or otherwise exposed to the power adapter.
6. Modification: Do not disassemble the wireless charger or power adapter. Do not modify or attempt to re-purpose the device. Do not service the device or replace any components.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesirable operation.

Warning: Any changes or modification to this device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.
  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

FCC AND IC RADIATION EXPOSURE STATEMENT
This device complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions:

1. A separation distance of 20 cm or more should be maintained between this device and persons during device operation. To ensure compliance, operation at closer than this distance is not recommended.
2. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

INNOVATION, SCIENCE, AND ECONOMIC DEVELOPMENT CANADA CAUTION STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

DECLARATION OF CONFORMITY

Hereby, PopSockets, LLC, declares that product type PW2B is in compliance with the essential requirements and the other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.popsockets.com/declaration- conformity
Transmit Frequency: Wireless Charging (126.6kHz-129.0kHz); Maximum RF Output Power: -9.26dBuA/m @ 10m

*For more information on PopGrip compatibility with PopPower 2, please visit:
European Distribution Center
Janssen Distribution Services
Newtonweg 10,
5928 PN Venlo,
Netherlands 19842815
PRIVACE.FLAWCODE.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>