Beats Powerbeats Set Up and User Guide
- June 22, 2024
- BEATS
Table of Contents
Beats Powerbeats Set Up and User Guide
Set up and use your Powerbeats
Here’s everything you need to know to make the most of your Powerbeats.
Turn on and charge your earphones
To turn your earphones on or off, press and hold the power button on your left earbud for 1 second. The first time that you power on your Powerbeats, they’re ready to pair with your device. The indicator light will flash to confirm that your Powerbeats are in pairing mode.
Charge your Powerbeats
Plug your earphones into a power source using the included Lightning cable.
Your earphones provide up to 15 hours of playback from a full charge, and up
to 1 hour of playback from a 5-minute charge. When your earphones are turned
on and set up, the LED indicator light on the left earphone shows how much
listening time is left:
- White: Up to 15 hours left
- Red: Less than an hour left
- Blinking red: Needs to charge
Pair your Powerbeats
Learn how to pair your Powerbeats earphones with your device.
Pair with an iPhone
Follow these steps to pair your earphones with your iPhone:
- Make sure that your iPhone is unlocked, and that Bluetooth is on.
- Hold your Powerbeats next to your iPhone.
- Follow the onscreen instructions.
Pair with your Mac or another device that uses Bluetooth
Follow these steps to pair your Powerbeats with your Mac, iPad, or any other
device:
- Press the button on your left earbud until you see the indicator light flash. Your Powerbeats are now in pairing mode.
- On your device, go to the Bluetooth menu.
- Select your earphones from the list of discovered Bluetooth devices.
Pair with an Android device
Follow these steps if you have an Android device:
- Get the Beats app for Android.
- Open the Beats app.
- Hold your Powerbeats next to your device.
- Follow the onscreen instructions.
Use your Powerbeats
Learn how to play music, change the volume, and answer calls.
Play Music
To control your music, you can use the “b” button on your right earbud. Here
are some things you can do:
- To pause or play audio, press the “b” button once.
- To skip to the next track, press the “b” button twice.
- To listen to the previous track, press the “b” button three times.
Change the volume
To control volume, use the volume buttons on your right earbud.
- Press and release the volume up button, or press and hold to increase volume continuously.
- Press and release the volume down button, or press and hold to decrease volume continuously.
Answer calls
To control phone calls, use the “b” button on your right earbud:
- Press once to answer or end a call.
- Press once to answer a second incoming call and put the first call on hold. When two calls are active, this switches between calls.
- Press and hold for 1 second to reject an incoming call.
- Press twice to stop listening through your earphones and send the call to your phone.
Hands-free controls
To activate Siri, you can say, “Hey Siri.” Or you can press and hold the “b”
button on your right earbud until you hear a chime. Then say what you need.
Learn what to do if Siri isn’t working. Siri features might vary by country or
region. To activate the voice assistance feature for other devices, press and
hold the “b” button.
Learn more
- Your Powerbeats are kept up to date automatically when you set them up with an iPhone using iOS 10 or later.
- If you have issues with sound, Bluetooth, or charging, you might want to reset your Powerbeats.
- Learn about Powerbeats water and sweat resistance.
- Find out how to clean and store your Powerbeats.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>