MOTOROLA SOLUTIONS APX 4000XH Single-Band P25 Portable Radio User Manual
- June 14, 2024
- Motorola Solutions
Table of Contents
MOTOROLA SOLUTIONS APX 4000XH Single-Band P25 Portable Radio
IMPORTANT INFORMATION3
APX 4000XH radio models, intrinsically safe, when properly equipped with the
battery NNTN8750x1 for, Division 1, Class I, Groups A, B, C, D, Class II,
Groups E, F, G, Class III, T4.
The Ex ia symbol marking on the radio indicates that it is Intrinsically Safe.
Operational Cautions for Intrinsic Safe Equipment
Radio units must be ordered with the intrinsic safety option and shipped from the Motorola Solutions manufacturing facility with the hazardous location certification label. Radio will not be upgraded to this capability or labeled once they have been shipped.
DO NOT charge the batteries inside the potentially hazardous atmosphere. Charge batteries only outside the hazardous atmosphere. Use only CSA approved accessories in the potentially hazardous atmosphere as listed in the section Approved Accessory Listing below. Ambient temperature range for an intrinsically safe operation of the radios is -20 °C up to +55 °C.
Use only antennas approved by Motorola Solutions for specific radio models. Visitwww.motorolasolutions.com for the list of antennas approved for your radio.
- The letter x is a placeholder. Refer to the CSA certificate for the revision information.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2015 and 2024 Motorola Solutions, Inc. All rights reserved. Printed in
Operational Cautions
C aution
- DO NOT operate radio communications equipment in potentially hazardous areas unless it is certified as intrinsically safe. This could result in unsafe condition in hazardous areas.
- DO NOT use the unit in hazardous areas if it has been physically damaged (for example, cracked housing, water intrusion, damaged antenna). The intrinsic safety rating could be compromised and may result in unsafe condition in hazardous areas.
- DO NOT remove or replace batteries, antennas, or accessories in hazardous areas. Contact sparking may occur and could result in unsafe condition in hazardous areas.
- DO NOT clean the radios in the potentially hazardous environment.
Operational Warnings
WARNING
- Failure to use a Motorola Solutions intrinsically safe battery or accessories that are specifically certified for that radio unit will negate the certification rating and could result in unsafe condition in hazardous areas.
- DO NOT disassemble an intrinsically safe product in any way that exposes the internal circuits of the unit. This could result in unsafe condition in hazardous areas.
- Only CSA-approved service centers and trained service personnel can service and repair the radios.
- Unauthorized modification, or incorrect repair or service to the intrinsically safe product could adversely affect the certification rating and result in unsafe condition in hazardous areas.
- Use of non-Motorola Solutions parts or substitution of parts will void the intrinsic safety approval rating of the Motorola Solutions unit and could result in unsafe condition in hazardous areas.
Approved Radio Model
| Sales Model | Product Name | Description |
|---|---|---|
| H51VCH9PW7AN | APX 4000XH | 806-941MHz FKP CSA |
Approved Accessories
Note:
NNTN8380 can be used with NNTN8378.
PMLN6333 can be used with PMLN6803.
NNTN8380 can be used with PMLN6803.
PMLN6333 can be used with NNTN8378.
RMN4054 has been replaced by PMLN8264.
NNTN8380 has been replaced by PMLN6333.
NNTN8378 has been replaced by PMLN6803.
The table below lists accessories that are approved for use in hazardous environments according to the CSA.
Audio Accessories
| Kit Number | Description | Class I | Class II/III |
|---|---|---|---|
| BDN6781_ | One-Wire Earbud, Black | Yes | Yes |
| NNTN8378_ | NNTN8378_ CSA 157 Push-To- | ||
| Talk Adapter, Nexus 4-pole | Yes | No | |
| NNTN8379_ | Dual Muff CSA 157 Headset 24NRR | Yes | No |
| NNTN8380_ | NNTN8380_ Dual Muff CSA 157 Headset 26NRR | Yes | No |
| PMLN5275_ | Behind-the-Head Heavy Duty Headset | Yes | Yes |
| PMLN6333_ | Twin Cup Hard Hat MT Headset, ATEX | Yes | No |
| PMLN6803_ | Small Push-To-Talk Adapter | Yes | No |
| PMLN8264_ | Receive-Only Hard Hat Mount with 3.5 mm RT Plug | Yes | Yes |
| RLN4941_ | Receive-Only Earpiece with Translucent Tube | Yes | Yes |
| RLN5313_ | One-Wire Earpiece with Acoustic Tube (Black) | Yes | Yes |
| Kit Number | Description | Class I | Class II/III |
| --- | --- | --- | --- |
| RLN5314_ | One-Wire Earpiece with Acoustic Tube (Beige) | Yes | Yes |
| RMN4054_ | Receive-only Hard Hat Mount with 3.5 mm RT Plug | Yes | No |
Battery
| Kit Number | Description |
|---|---|
| NNTN8750_ | CSA IMPRES Li-Ion, 2000 mAh Battery |
Carrying Options
| Kit Number | Description |
|---|---|
| PMLN4651_ | 2 inch Belt Clip |
| PMLN5610_ | 2.5 inch Replacement Swivel Belt Loop |
| PMLN6086_ | 2.5 inch Belt Clip |
| PMLN7327_ | 2.5 inch Hard Leather Carry Case with Swivel Belt Loop for Full- |
Keypad Radio
Dust Cover
| Kit Number | Description |
|---|---|
| 0104067J27 | GCAI Dust Cover Assembly |
Remote Speaker Microphone
| Kit Number | Description | Class I | Class II/III |
|---|---|---|---|
| PMMN4050_ | IMPRES Radio Speaker Microphone with 3.5 mm Audio Jack, IP54 | ||
| Standard | Yes | No | |
| PMMN4067_ | IMPRES Radio Speaker Microphone with Volume Switch and Emergency | ||
| Button, IP64 Standard | Yes | Yes |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>