ESDEC 1008040 Click Fit Evo Roof Hook Universal Instruction Manual
- June 15, 2024
- ESDEC
Table of Contents
ESDEC 1008040 Click Fit Evo Roof Hook Universal
THE 4 COMPONENTS OF CLICKFIT EVO
CLICK FIT EVO HANGER BOLT
- Fully preassembled hanger bolt
- Height adjustable
- Compensates for roof irregularities up to 10 degrees
- Can be rotated by 360 degrees
- Self-aligning click connection: easy and quick
- Mounting rail can be installed horizontally or vertically
- For both landscape and portrait positioning of solar panels
- For new builds and existing buildings
- Available in three lengths and two thicknesses for wood purlins/trusses
MOUNTING RAIL
- Quick and easy to click into the ClickFit EVO click connection on the hook
- Available in different lengths
- Rails can be coupled with a coupler
UNIVERSAL MODULE CLAMP
- Suitable for all framed solar panels
- Can be used as centre clamp or as end clamp in combination with end cap
- Standard assembly
- Including equipotential bonding for the solar panels
- Available in grey and black
END CAP
- End cap holds the module clamp in its position
- Elongated end cap to allow for aesthetically pleasing finish
- Available in grey and black
EASY INSTALLATION ON THE ROOF
ClickFit EVO for EPDM and Bitumen Roofs
ClickFit EVO for EPDM and Bitumen Roofs has been specially developed for use
with the well-known ClickFit EVO system on EPDM and bitumen roofs, as are
often found on business premises with pitched roofs. This straightforward
system consists of just four components and can be installed on both existing
and new roofs. The preassembled hanger bolt features the familiar ClickFit Evo
click connection. The unique universal properties of this system let you
install solar panels quickly and easily on pitched roofs.
The hanger bolt compensates for roof irregularities of up to 10 degrees
With the ClickFit EVO Hanger Bolt, you can quickly install solar panels on all
types of EPDM and bitumen roofs. The hanger bolt is provided pre-assembled and
the flexible adapter allows you to easily and quickly compensate for roof
irregularities of up to 10 degrees. Using the universal ClickFit EVO click
connection fitted to the hanger bolt as standard, you can simply carry on
working with familiar components from the ClickFit EVO product line, such as
universal rails, module clamps and end caps. As well as being suitable for
EPDM and bitumen roofs, the hanger bolt can also be used on corrugated, steel
and Arabic tiles.
Mounting on an EPDM and bitumen roof
Not all types of EPDM and bitumen roofs are suitable for mounting with hanger
bolts: in this case the thermal effect, and thus the watertightness, of the
roof covering is affected as soon as it has been drilled into. Therefore,
consult a roofing specialist for advice before installing.
If the roof substructure is made from an engineered wood board with a minimum
thickness of 50 mm, you can install the hanger bolts where you want.
Otherwise, you must first locate the purlins/trusses. The hanger bolt must
then be mounted in the purlin/truss. It is also important to ensure the area
is waterproofed again when mounting the hanger bolt on an EPDM or bitumen
roof. To do this, use a sealant suitable for the type of roof covering and the
corresponding washer. You can even include these in your original order, it
couldn’t be easier! The project plan created by our calculator includes
details of exactly how much sealant and how many washers you require.
ADVANTAGES FOR THE INSTALLER
- Both landscape and portrait placement
- Four components on the roof
- Only one tool needed
- Quick and easy installation
- 20-year product warranty
ADVANTAGES FOR YOUR CUSTOMER
- 100% waterproof
- Aesthetic design, also available in black
- Comprehensively tested
- 20-year product warranty
-
Unique hanger bolt
The hanger bolt is delivered in preassembled form. Using the flexible adapter, the hanger bolt can also compensate for roof irregularities of up to 10 degrees. -
Fitted with a ClickFit EVO click connection
The hanger bolt features a self-aligning click connection. This makes it easy to install the mounting rail from above. -
Integrated cable management
Cables and connectors are neatly and securely held in place in the hanger bolt. You can also simply click the optimizer or micro-inverter onto the rail with the MLPE clip. -
Always the right size
The universal module clamp is adjustable in height and therefore suitable for solar panels with a frame thickness between 30 and 50 mm. Due to its smart design, this panel clamp can be used as a mid clamp and as an end clamp (in combination with the end cap).
ROOF FASTENERS
ClickFit EVO Hanger Bolt
M10x200mm 1008011
M10x250mm 1008012
M12x250mm 1008013
M12x300mm 1008014
M12x350mm 1008015 [DTO]
MOUNTING RAIL
ClickFit EVO Mounting rail
Mounting rail 1188mm 1008131
Mounting rail 2338mm 1008132
Mounting rail 3488mm 1008133
Mounting rail 3500mm 1008007
Mounting rail 4638mm 1008134
Mounting rail 5770mm 1008135
MODULE CLAMP & END CAP
-
ClickFit EVO Module Clamp Universal grey
1008020 -
ClickFit EVO Module Clamp Universal black
1008020-B -
ClickFit EVO Mounting rail End cap grey
1008060 -
ClickFit EVO Mounting rail End cap black
1008060-B -
ClickFit EVO End Cap without end clamp support grey
1008066 -
ClickFit EVO End Cap without end clamp support black
1008066-B -
ClickFit EVO End Clamp Support grey
1008065 -
ClickFit EVO End Clamp Support black
1008065-B
ACCESSORIES
-
ClickFit EVO Mounting Rail Connector Piece
1008061 -
ClickFit EVO MLPE Clip Light Weight up to 2kg
1008067 -
ClickFit EVO MLPE Clip Heavy Weight from 2 to 8kg
1008068 -
Self drilling screw 6.3x42mm SW10/T30
1003016 (required for vertical rail installation) -
ClickFit EVO Auxiliary set with cable clip
1008064 -
ClickFit EVO bit torx 30
1008069 -
Hanger Bolt Washer Inox 80mm
1003070
Calculator
In the Esdec calculator you can manage and calculate all your projects, for both pitched and flat roofs. One platform with all Esdec mounting systems for the most reliable calculation of your project.
Save time: manage all your projects on one platform
One calculator for projects on pitched and flat roofs
All calculations are based on extensive testing and the latest safety
standards
Go to esdec.com/en/calculator
Warranty
ClickFit EVO meets all of the requirements and standards that currently apply. ClickFit EVO comes with a unique 20-year warranty, thus ensuring the system’s quality.
- Use of premium high tech materials
- Extensively tested
- 20-year product warranty
Esdec
Londenstraat 16
7418 EE Deventer
The Netherlands
+31 850 702 000
info@esdec.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>