GRUPPO GAMMA Venturo Field III Watch Instruction Manual

GRUPPO GAMMA Venturo Field III Watch

Specifications

• Case: Stainless steel, brushed, diameter 40mm
• Crystal: Sapphire, box-shaped, anti-reflective
• Dial: With luminous hands and markers
• Movement: Seiko Instruments NH38A
• Functions: Hour, minute, second
• Water Resistance: 200m/660ft

Product Usage Instructions

Fastening & Unfastening Crown
To unfasten the crown, turn it anticlockwise until it pops out. To fasten, turn the crown clockwise while pressing it against the case. Avoid over- tightening.

Setting the Time
Pull the unfastened crown out to position B. Turn the crown to set the time and then push the crown back to Position A.

Winding

Option 1:
Flick the timepiece sideways to swing the rotor for automatic winding. Alternatively, unfasten the crown to the winding position and give it a few turns clockwise until the timepiece starts running.

Opening & Closing the Bracelet Clasp
To open, release the safety flap and flick open the clasp with reasonable force. To close, press down until you hear a clicking sound.

Sizing & Removing the Bracelet
Use a 1.2mm slotted screwdriver to secure or remove removable links on the bracelet. Micro-adjustment can be done by moving end links to other mounting holes on the clasp using a spring bar tool. To remove the bracelet from the watch head, press the quick-release levers on the end links.

General Care
Avoid wearing or storing the timepiece with the crown unfastened or operating it when wet. Rinse after swimming and protect from steam, vapour, extreme temperatures, corrosive chemicals, and strong magnetic fields.

Aftersales Support
The timepiece is warranted against manufacturing defects for 2 years. Contact [email protected] for assistance.

FAQ

Q: How often should I wind my watch?

A: If worn regularly, automatic winding should occur with arm movement. If not worn daily, wind manually every 1-2 days.

Q: Can I swim with the watch?

A: The watch has a water resistance of 200m-660ft, making it suitable for swimming and water activities.

Q: How should I clean my watch?

A: Rinse the watch in fresh water after swimming and use a soft cloth to gently wipe the case and bracelet. Avoid harsh chemicals and cleaners.

About the Field III

The third iteration of Venturo’s signature field watch line, the Field III is our smallest watch to date with a 40mm case, but with the same quality of materials and workmanship that Gruppo Gamma is known for.

• Case: Stainless steel, brushed, diameter 40mm
• Crystal: Sapphire, box-shaped, anti-reflective
• Dial: With luminous hands and markers
• Movement: Seiko Instruments NH38A
• Functions: Hour, minute, second
• Water resistance: 200m/ 660ft

Fastening & Unfastening Crown

• To unfasten, turn the crown anticlockwise until it pops out.
• To fasten, turn the crown clockwise while pressing it against the case. Don’t over-tighten; there’s no need to.

Setting the Time

• Pull the unfastened crown out to position B.
• Turn the crown to set the time, then push the crown back to Position A.

Winding

• Flick the timepiece sideways to swing the rotor. When the timepiece is on your wrist, your arm movements will automatically wind the movement. The audible spinning of the rotor is normal.
• Alternatively, unfasten the crown to the winding position and give it a few turns clockwise until the timepiece starts running.

Opening & Closing the Bracelet Clasp

• The clasp is locked by compression. To open, release the safety flap and then flick open the clasp using reasonable force.
• To close the clasp, press down until you hear a clicking sound.

Sizing & Removing the Bracelet

• Removable links on the bracelet are secured using screw bars. To remove and install them, use a 1.2mm slotted screwdriver.
• Micro-adjustment can be done by moving the end links to the other mounting holes located on the clasp. The end links are mounted to the clasp using spring bars. To remove and install them, use a spring bar tool.
• To remove the bracelet from the watch head, press the quick-release levers on the end links.

General Care

• Don’t wear or store your timepiece with the crown unfastened, and don’t operate the crown when your timepiece is wet. After swimming, rinse it in freshwater.
• Steam and vapour can penetrate the case and damage your timepiece. Don’t expose it to temperature extremes or corrosive chemicals, or wear it in saunas.
• Don’t place a timepiece near loudspeakers or other equipment that generates strong magnetic fields that may affect its precision.

Gruppo Gamma Watch Tool

• The tool can be separated into 2 pieces by unscrewing it in the middle.
• Unscrew the caps to reveal a tool bit on each end.
• Each tool bit can be switched out for use as a screwdriver, spring bar fork, or pin.

Earlier versions are fitted with a 1.6 mm screwdriver instead, for use with Mk I Nexus models.

Aftersales Support

This timepiece is warranted against manufacturing defects for 2 years. For assistance, contact us at [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>