J M Manufacturing JMRC044-27-01 Remote Control Formula 1 Drift Car Instruction Manual

J M Manufacturing JMRC044-27-01 Remote Control Formula 1 Drift Car

Product Specifications

• Product Name: Remote Control Drift Formula Car
• Battery Type: Rechargeable 3.7V Lithium battery for the car, 1.5V AA Alkaline batteries for the controller
• Charging Time: Approximately 2-3 hours
• Controller Battery Requirement: 2 x 1.5V AA Alkaline Batteries (Not Included)
• Charging Power: 500mA Max

Product Usage Instructions

Batteries Installation

1. Remove the screw and open the battery cover.
2. Install the Rechargeable 3.7V Lithium battery.
3. Unscrew the battery cover on the car and connect the 3.7V Lithium battery in the compartment.
4. Slide the ON/OFF Switch to ON to power on the Drift Formula Car.

For Controller:

1. Remove the screw and open the battery cover.
2. Install two 1.5V AA size Alkaline batteries.
3. Put the screw back to lock the battery cover.

Charging the Lithium Battery

Connect the Rechargeable Lithium Battery to a USB charger (500mA Max Charging Power) for approximately 2-3 hours before use.

Functional Description of the Controller

• Side Slip Left Front / Right Rear
• One-Key Demonstration
• Forward/Backward

Care and Maintenance

1. Use a dry and soft cloth to clean the product.
2. Avoid exposure to sunlight or heat.
3. Regularly check for damages and stop using if any are found.
4. Avoid playing in water or damp environments.
5. Safely dispose of batteries as per local regulations.

Frequently Asked Questions

Q: How do I charge the Lithium Battery?

A: Connect the Rechargeable Lithium Battery to a USB charger with a maximum power of 500mA for approximately 2-3 hours before use.

• Thank you for purchasing the Remote Control Drift Formula Car.
• Before playing the Remote Control Drift Formula Car, please read the instruction manual carefully and keep it for reference.

Product Overview & Package Contents

Batteries Installation

For Drift Formula Car

1. Remove the screw and open the battery cover.
2. Install the Rechargeable 3.7V Lithium battery.
3. Unscrew the battery cover on the car.
4. Connect and install the 3.7V Lithium battery in the battery compartment at the bottom of the car.
5. Slide the ON/OFF Switch to ON to turn on the Drift Formula Car.

For Controller

1. Remove the screw and open the battery cover
2. Install two 1.5V AA size Alkaline batteries
3. Put the screw back to lock the battery cover

• Notice: When placing the batteries, you must insert according to the correct polarity, the Drift Formula Car won’t function if the batteries are reversed.

Remote Controller Requires

• 2 (Two) x 1.5V AA Alkaline Batteries (Not Included).
• Caution: This Product is only used in the 3.7 V output device plug!

Charging the Lithium Battery

1. Connect the rechargeable Lithium Battery to the USB charger, and plug it into the computer or USB charging head for charging. The charging time is about 2-3 hours before use.

USB Cable Rating

• 500mA Max Charging Power

RC Drift Car Contains

• (One) Rechargeable 3.7V Lithium Battery.

Functional Description of the Controller

Operate Your Car

Care and Maintenance

1. Always use a dry and soft cloth to clean this product.
2. Avoid this product from being exposed to sunlight or heat.
3. Check the product regularly. If any damages are discovered, please stop using it immediately, until it is completely repaired and in good working condition.
4. Do not play the vehicle in the water or damp environment.
5. Safe disposal of batteries. Do not throw batteries in the fire because the battery will leak and cause an explosion.

BATTERY INFORMATION

IMPORTANT:

TO AVOID BATTERY LEAKAGE

• Always follow the instructions carefully. Use only the batteries specified and be sure to insert them correctly by matching the + and – polarity markings.
• Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
• Remove exhausted or dead batteries from the product.
• Remove batteries if the product is not to be played with for a long time.
• Do not short-circuit the supply terminals.
• Should this product cause, or be affected by local electrical interference, move it away from other electrical equipment.
• Reset (switching ON & OFF again or removing and re-inserting batteries) if necessary.

POSSIBLE HEAT HAZARD

• If the battery needs to recharge, please wait 10-15 minutes to let the battery cool down before charging.
• Do not overcharge the battery. The battery should be removed from the charger immediately and cooled down if the battery is at the high temperature. Otherwise, the battery may become demaged.
• Always pay attention when you are charging the battery. Do not disassemble or reconstruct the battery. Do not connect the battery to an electrical outlet.

FOR YOUR SAFETY

• The charging cable included with this item is intended for use with this product only.

WARNING

• This product is suitable to be used by people who have operating experience in remote toys or are no less than 8 years old.
• Please do not put the product in your mouth to prevent the choking hazard of small parts.
• Please do not put your finger into available interspaces.
• Please do not play the product in a brutal way such as throwing, crashing, or twisting it.
• Please store the smaller-sized product accessories in places that are out of reach of children, to avoid the occurrence of accidents. Avoid placing the batteries in places in high temperatures and avoid exposure to heat.
• When young children are operating the product, it shall be ensured that the adults are guiding and making sure the product control is within the viewing range of the controller (or instructor) so that it makes the control of the toy more convenient.
• When the product is not in use, please switch off the power supplies of the toy, and remove the batteries from the product.
• Please note that we won’t take any responsibility for any wrong operation as this may result in severe injury or loss of property, and we cannot control the operating process when the user assembles or uses this product.
• Once this product is sold, we won’t be responsible for any safety responsibility during the time the user operates or uses controls on these products.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio / TV technician for help.

RF warning statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

• Conforms to ASTM F963-23 CLASS 1 LED PRODUCT
• Distributed By 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106
• Made in Shantou, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>