evatronic ET-SK010 Bocina 350 RGB BT Speaker User Guide

June 5, 2024
evatronic

evatronic ET-SK010 Bocina 350 RGB BT Speaker

evatronic ET-SK010 Bocina 350 RGB BT Speaker

KNOW YOUR SPEAKER

  1. Touch panel
  2. RGB Lights
  3. Volume Control
  4. Double speaker

ON /OFF

  • Turn the volume control clockwise until you hear a soft click to turn on the speaker.
  • Turn the volume control all the way to the left to turn off the speaker.

VOLUME CONTROL

  • Turn the volume control clockwise to increase the volume.
  • Turn the volume control counterclockwise to decrease the volume.

BLUETOOTH CONNECTION

To connect your ET-SKO10 Speakers via Bluetooth, turn on your speaker, search through available devices, select ” Evatronic SKO10 ” and pair it.

SWITCH RGB LIGHT MODE
You can switch the light mode by tapping the top of the speaker once..

DATA SHEET

evatronic ET-SK010 Bocina 350 RGB BT Speaker
2

NEED HELP

E-mail: support@evatronic.co Manufacturer: Shenzhen Danya Technology Co., Ltd. Address: Room 3323, Building C, Galaxy World Phase II, Minle Community.Minzhi Street. Longhua District. Shenzhen

FC RULES

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  • Connect the equipment into an Outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals